American Standard 0555.800, 0555.400 User Manual

WILLIAMSBURG™

PEDESTAL LAVATORY

VITREOUS CHINA

WILLIAMSBURG LAVATORY WITH PEDESTAL

• Vitreous china

• Turn-of-the-century detailing on lavatory and pedestal

• Front overflow

• Supplied with mounting kit

• Faucet ledge with large deck area (faucet not included)

❏ 0555.800 (Illustrated)

Faucet holes on 203mm (8") centers

❏ 0555.400

Faucet holes on 102mm (4") centers

Nominal Dimensions: 619 x 495 x 900mm (24-3/8" x 19-1/2" x 35-7/16")

❏ 0555.008 Lavatory slab-203mm (8") centers ❏ 0555.004 Lavatory slab-102mm (4") centers ❏ 734906-400 Pedestal only

Bowl sizes: 489mm (19-1/4") wide, 289mm (11-3/8") front to back, 146mm (5-3/4") deep

Compliance Certifications Meets or Exceeds the Following Specifications:

• ASME A112.19.2M for Vitreous China Fixtures

To Be Specified

❏ Color: White ❏ Faucet*: ❏ Faucet Finish: ❏ Supplies: ❏ 1-1/4" Trap: ❏ Nipple:

NOTES:

DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP ARE SUGGESTED.

▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.

■ SUITABLE FOR REINFORCEMENT ONLY.ACTUAL DIMENSIONS MUST BE TAKEN FROM

FIXTURE. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

* See faucet section for additional models available

SPS 0555

89mm (3-1/2)

▼

PEDESTAL ANCHORING SCREW HOLES 8mm (5/16) DIA.

■

203mm

(8)

FINISHED WALL

212mm

(8-1/2)

495mm

(19-1/2)

13mm (1/2) DIA. HOLES FOR ANCHOR BOLTS

51mm

(2)

■

619mm (24-3/8)

260mm (10-1/4)

REF.

203mm

(8)

578mm

(22-3/4)

203mm

521mm

(20-1/2)

(8)

229mm

SUPPLIES AS

REQUIRED

1-1/4 O.D. WASTE

1-1/4 O.D. TAILPIECE

(9)

178mm

(7)

FINISHED FLOOR

900mm

(35-7/16)