American Standard 734906-401, 0555.108, 0555.801, 0555.401, 0555.104 User Manual
TOWNSEND PEDESTAL SINK
FIN ISH ED
WAL L
495 mm
(19 -1/ 2)
619mm
(24-3/8)
89mm
(3-1/2)
203mm
(8)
212mm
(8-1/2)
PED EST AL AN CHO RING
SCR EW HOLES
8mm (5 /16) DIA .
260mm
(10-1/4)
REF.
203mm
(8)
203mm
(8)
178mm
(7)
13mm
(1/2) DIA.
HOLES FOR
ANCHOR BOLTS
900mm
(35-7/16)
*
578mm
(22-3/4)
*
521mm
(20-1/2)
51mm
(2)
229mm
(9)
1-1 /4 O.D.
WAS TE
SUPPLIES AS
REQUIRED
1-1 /4 O.D.
TAI LPI ECE
FIN ISH ED
FLO OR
PEDESTAL
SIDE SECTION
• Vitreous china
• Turn-of-the-century detailing on lavatory
and pedestal
• Front overow
• Supplied with mounting kit
• Faucet ledge with large deck area
(faucet not included)
❏ 0555.801 Faucet holes on 203mm (8") centers
(Illustrated)
❏ 0555.401 Faucet holes on 102mm (4") centers
Nominal Dimensions:
619 x 495 x 900mm
(24-3/8" x 19-1/2" x 35-7/16")
❏ 0555.108 Lavatory slab-203mm (8") centers
❏ 0555.104 Lavatory slab-102mm (4") centers
❏ 734906-401 Pedestal only
TOWNSEND
PEDESTAL SINK
VITREOUS CHINA
Bowl sizes:
489mm (19-1/4") wide,
289mm (11-3/8") front to back,
146mm (5-3/4") deep
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
To Be Specied:
❏ Color: ❏ White
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
❏ Nipple:
* See faucet section for additional models available
© 2008 AS America Inc.
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TR APS
*
ARE SUGGESTED.
▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTING NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerance established by ANSI Standard A112.19.2
These measurements are subject to c hange or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J9
Revised 2/08
Loading...