American Standard 0427.444 User Manual
© 2004 American Standard Inc.
BS-47
VITREOUS CHINA
❏ 0427.444sg Faucet holes on 4” (102mm) centers
(illustrated)
Nominal Dimensions:
19" dia. (483mm)
Bowl sizes:
15-1/4” (387mm) wide,
12-1/4" (311mm) front to back,
6” (152mm) deep
Compliance Certifications Meets or Exceeds the Following
Specifications:
• ASME A112.19.2M for Vitreous China
Fixtures
• CAN/CSA B45 series
To Be Specified
❏ Color:
❏ Faucet*:
❏ Faucet Finish
❏
Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
Revised 11/04
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP ARE SUGGESTED.
▲ FOR COUNTERTOP CUTOUT USE TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT
: Dimensions of fixtures are nominal and may vary within the range of tolerances estab-
lished by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. N
o
responsibility is assumed for use of superseded or voided pages
.
BARRIER FREE
CADET ROUND COUNTERTOP SINK
WITH SCOTCHGARD
• Featuring Scotchgard Protector for easy
cleaning
• Makes toothpaste, lotions, makeup and other
soils easy to clean away
• Allows water to bead up and run off
• European-styled interior bowl
• Vitreous china construction
• Self-rimming oval countertop
• Front overflow
• Supplied with cutout template
• Front overflow
CADET™™ROUND COUNTERTOP
SINK WITH SCOTCHGARD
MEETS THE AMERICAN DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USEABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Install lavatory 864mm (34") from finished floor.
Lavatory installed 51mm (2") minimum from front edge
of countertop provides 686mm (27") knee clearance
area.
FINISHED WALL
OR SPLASHBACK
1-3/4" DIA.
STD. DRAIN
OUTLET
SEALING
COMPOUND
▲COUNTERTOP
(BY OTHERS)
★10-3/4"
(273mm)
★12-7/8"
(327mm)
24
8
MIN.
BARRIER FREE
CLEARAN CE
(610mm)
4
(102mm)
OPTIONAL
1-1/4" O.D.
1-1/4" O.D.
3-1/8"
(79mm)
SUPPLIES
AS REQ'D
WASTE
TAILPIECE
7-1/2"
(191mm)
3/4"
(19mm)
8"
(203mm)
SUGGESTED
19"
(448mm)
(787mm)
33-1/4"
(845mm)
31"
33-1/4
(845mm)
(686mm)
(203mm)
27
MIN.
4"
(102mm)
19"
(483mm)
8"
(203mm)
FINISHED FLOOR
6
(152mm)
MAX.
(229mm)
MIN.
9
Loading...