American Standard 0373.027, 0373.950, 0373.050 User Manual
PENLYN™ WALL-HUNG LAVATORY
203 mm
(8)
403 mm
(15 -7/8)
88 mm
(3- 7/16)
178 mm
(7)
457 mm
(18 )
C/L
267 mm
(10 -1/2)
102 mm
(4)
102 mm
(4)
95 mm
(3- 3/4)
3 m m
(1/ 8)
178 mm
(7)
203 mm
(8)
HOL ES FOR ANCH OR
SCR EWS IN BACK DRAPE RY
787 mm
(31 )
*
502 mm
(19-3/ 4)
*
460 mm
( 18-1/8 )
SUP PLIES AS RE QUIRED
1-1 /4 O.D . TAI LPIECE
1-1 /4 O.D . WAS TE
FIN ISHED FLOOR
175 mm
(6- 7/8)
HAN GER
FIN ISHED WALL
C/L OF HA NGER
ANC HORING SLOT S
381 mm
(15 )
54m m (2-1 /8) D IA.
HOL ES FOR
CON CEALED ARMS
• Wall-hung sink
• Vitreous china
• Front overow
• Integral back splash
• Faucet ledge
Shown with 4801.862 Amarilis Heritage
faucet with Triune Cross handles
(not included)
Faucet holes on 102mm (4") centers:
❏ 0373.027 For wall hanger (included)
❏ 0373.050 For concealed arms support
❏ 0373.950 For concealed arms support
• Less overow
Nominal Dimensions:
457 x 403mm
(18" x 15-7/8")
PENLYN™
WALL-HUNG LAVATORY
VITREOUS CHINA
Bowl sizes:
340mm (13-3/8") wide
216mm (8-1/2") front to back
127mm (5") deep
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.2 for Vitreous China Fixtures
To Be Specied:
❏ Color: ❏ White
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
❏ Nipple:
❏ Concealed Arms Support (by others):
* See faucet section for additional models available
© 2008 AS America Inc.
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP
*
ARE SUGGESTED.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibilit y is
assumed for use of superseded or voided pages.
M25
Revised 8/05
Loading...