DECLYN™ WALL-HUNG LAVATORY
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Top of front rim mounted 864mm (34") from finished floor.
FIN ISHED
WAL L
102mm
(4)
FIN ISHED
FLO OR
1-1 /4 O.D .
TAI LPIECE
1-1 /4 O.D .
WAS TE
203 mm
(8)
178 mm
(7)
165 mm
(6- 1/2)
SUPPLIES
AS REQ'D.
197 mm
(7- 3/4)
470 mm
(18 -1/2)
57m m
(2- 1/4)
114 mm
(4- 1/2)
178mm
(7)
432mm
(17)
483 mm
(19 )
267 mm
(10 -1/2)
114 mm
(4- 1/2)
70m m
(2- 3/4)
38m m
(1- 1/2)
76m m
(3)
89m m
(3- 1/2)
343 mm
(13 -1/2)
235 mm
(9- 1/4)
11m m (7/1 6) DIA .
ANC HOR SC REW
HOL ES
SOA P DEPR ESSION
C/L
*
INT EGRAL
BRA CKETS
HAN GER
*
787mm (3 1)
864mm (3 4)
19m m
(3/ 4)
406 mm
(16 )
54m m (2-1 /8) DI A.
HOL ES FOR
CON CEALED ARMS
• Wall-hung sink
• Vitreous china
• Rear overow
• Soap depression
• Faucet ledge
Shown with 2000.101 Ceramix faucet
(not included)
❏ 0321.026 With wall hanger (Illustrated)
Faucet holes on 102mm (4") centers
❏ 0321.075 For concealed arms support
Faucet holes on 102mm (4") centers
Nominal Dimensions:
470 x 432mm
(18-1/2" x 17")
DECLYN™
WALL-HUNG LAVATORY
VITREOUS CHINA
Bowl sizes:
362mm (14-1/4") wide
273mm (10-3/4") front to back
152mm (6") deep
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.2 for Vitreous China Fixtures
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Silver
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
❏ Nipple:
❏ Concealed Arms Support (by others):
* See faucet section for additional models available
© 2008 AS America Inc.
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP
*
ARE SUGGESTED.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibilit y is
assumed for use of superseded or voided pages.
M27
Revised 7/07