American Standard 0293.008, 0293.004 User Manual
BARRIER FREE
31"
(787mm)
SUGGESTED
32-7/8"
(835mm)
32-7/8"
(835mm)
9-1/4
(235mm)
18-1/2
(470mm)
22-7/8
(581mm)
FINISHED WALL
OR SPLASHBACK
8"
(203mm)
1-1/4" O.D. TAILPIECE
1-1/4" O.D. WASTE
FINISHED FLOOR
*
10-3/4"
(273mm)
*
12-7/8"
(327mm)
COUNTERTOP
(BY OTHERS)
SEALING
COMPOUND
1-1/8
(29mm)
8-1/2
(216mm)
OPTIONAL
3/4
(19mm)
SUPPLIES
AS REQ'D
1-3/4" DIA.
STD. DRAIN
OUTLET
3-1/4"
(83mm)
8
(203mm)
4
(102mm)
24
(610mm)
6
(152mm)
MAX.
BARRIER FREE
CLEARAN CE
27
(686mm)
MIN.
8
(203mm)
MIN.
9
(229mm)
MIN.
DRAWING FOR
DIMENSIONAL
PURPOSES ONLY.
IT IS NOT AN EXACT
REPRESENTATION.
Standard Collection®
COUNTERTOP SINK
• Classically-styled oval countertop sink
• Made from reclay china
• Front overow
• Self-rimming with cutout template supplied
• Design matched to Standard Collection® toilet
and xtures
❏ 0293.004 Faucet holes on 4" (203mm) centers
❏ 0293.008 Faucet holes on 8" (102mm) centers
(illustrated)
Nominal Dimensions:
22-7/8" x 18-1/2"
(581 x 470mm)
Bowl sizes:
15-3/4" (400mm) wide
11-1/4" (286mm) front to back
6-1/2" (159mm) deep
Standard Collection
COUNTERTOP SINK
FIRECLAY
®
Compliance Specications Meets or Exceeds the
Following Specications:
• ASME A112.19.9M for
Non-Vitreous Ceramic Fixtures
• CAN/CSA B45 Series
To Be Specied:
❏ Color: ❏ White ❏ Linen
❏ Standard Collection Faucet: 8" spread faucet
No. 2881
❏ Standard Collection Faucet: 4" spread faucet
Nos. 2471, 2171, or 2071
❏ Faucet Finish: Chrome or Satin
❏ Supplies:
❏ 1-1/4" Trap:
MEETS THE AMERICAN DISABILIT IES ACT GUIDELINES AND
ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND
FACILITIES - CHECK LOCAL CODES.
Install lavatory 864mm (34") from nished oor.
Lavatory installed 51mm (2") minimum from front edge of countertop
provides 686mm (27") knee clearance area.
© 2008 AS America Inc.
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TR AP
*
ARE SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURES AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.9M.
These measurements are subject to c hange or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J30
Revised 2/08
Loading...