American Standard 733500-400, 0240.100, 0240.004, 0240.001, 0240.400 User Manual

...

REPERTOIRE™ PEDESTAL SINK

203 mm

(8)

FIN ISHED WALL OR SPLASH BACK

610 mm

(24 )

508 mm

(20 )

PED ESTAL ANCHO RING SCR EW HOL ES 5/ 16 DIA .

216 mm

(8- 1/2)

76m m

(3)

521 mm

(20 -1/2)

FINISHED FLOOR

203 mm

(8)

1-1/4 O.D

TAILPIECE

1-1/4 O.D.

WASTE

SUPPLIES AS REQ'D

178 mm

(7)

864 mm

(34 )

603 mm

(23 -3/4)

197 mm (7- 3/4)

527 mm

(20 -3/4)

241 mm

(9- 1/2)

19mm (3/4) DIA. HOLES FOR ANCHOR BOLTS

210 mm (8- 1/4)

76m m

(3)

DRAIN

CHASE

OPEN

FLOOR

• Traditional-styled basin with backsplash and matching pedestal

• Made from vitreous china

• Rear overow

• Supplied with mounting kit

• Faucet ledge (faucet not included)

❏ 0240.800 Faucet holes on 8" (203mm) centers

(Illustrated)

❏ 0240.400 Faucet holes on 4" (102mm) centers ❏ 0240.100 Center hole only

Nominal Dimensions: 610 x 559 x 864mm (24" x 20" x 34")

Separate Components:

❏ 0240.008 Pedestal top-8" (203mm) centers ❏ 0240.004 Pedestal top-4" (102mm) centers ❏ 0240.001 Pedestal top-center hole only ❏ 733500-400 Pedestal only

REPERTOIRE™

PEDESTAL SINK

VITREOUS CHINA

Bowl sizes:

533mm (21") wide 305mm (12") front to back 152mm (6") deep

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures

* See faucet section for additional models available

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver ❏ Fawn Beige ❏ Black

❏ Faucet*: ❏ Faucet Finish: ❏ Supplies: ❏ 1-1/4" Trap:

NOTES:

DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TR AP ARE

SUGGESTED.

▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.

■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST

BE TAKEN FROM FIXTURE. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to c hange or cancellation. No responsibility is assumed for use of superseded or voided pages.

J10

Revised 2/08