ANTIQUITY™ PEDESTAL SINK
356mm
(14)
DRAIN
CHASE
FIN ISHED
WAL L
483 mm
(19 )
622mm
(24-1/2)
89mm
(3-1/2)
203mm
(8)
203mm
(8)
PED ESTAL ANCHO RING
SCR EW HOL ES
8mm (5/16 ) DIA .
264mm
(10-3/8)
REF.
203mm
(8)
203mm
(8)
178mm
(7)
13mm
(1/2") DIA.
HOLES FOR
ANCHOR BOLTS
864mm
(34)
*
578mm
(22-3/4)
*
521mm
(20-1/2)
51mm
(2)
241mm
(9-1/2)
1-1 /4 O.D .
WAS TE
SUPPLIES AS
REQUIRED
1-1 /4 O.D .
TAI LPIECE
FIN ISHED
FLO OR
• Turn-of-the-century detailing on lavatory
and pedestal
• Made from vitreous china
• Rear overow
• Supplied with mounting kit
• Faucet ledge with large deck area
(faucet not included)
• Design matched to Antiquity toilets
❏ 0228.080 Faucet holes on 8" (203mm) centers
(Illustrated)
❏ 0224.040 Faucet holes on 4" (102mm) centers
Nominal Dimensions:
610 x 483 x 864mm
(24-1/2" x 19" x 34")
Separate Components:
❏ 0228.018 Pedestal top-8" (203mm) centers
❏ 0224.014 Pedestal top-4" (102mm) centers
❏ 731007-400 Pedestal only
ANTIQUITY™
PEDESTAL SINK
VITREOUS CHINA
Bowl sizes:
483mm (19") wide
298mm (11-3/4") front to back
140mm (5-1/2") deep
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
© 2008 AS America Inc.
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TR AP ARE
*
SUGGESTED.
▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to c hange or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J12
Revised
Revised 2/08