American Standard 0186.001, 0186.403, 0186.803 User Manual

BARRIER FREE
SAVONA™ COUNTERTOP SINK
FIN IS HED W ALL OR SP LAS HB ACK
216mm
(8-1/2)
432mm
(17)
70mm (2-3/4)
203mm
(8)
OPTIONAL
260mm*
(10-1/4)
178mm
(7)
25mm
(1)
25mm (1)
178mm
(7)
318mm*
(12-1/2)
787mm
(31)
FINISHED
FLOOR
559mm
(22)
203 mm
(8)
1-1 /4 O. D.
TAI LP IEC E
1-1 /4 O. D.
WAS TE
SUP PL IES AS RE Q'D
COUNTERTOP (BY OTHERS)
SEALING COMPOUND
• Made from vitreous china
• Self-rimming with cutout template supplied
• Soap/accessory ledge
• Rear overow
• Design matched to Savona toilets
• Shown with 8871.902 Lexington spread faucet
0186.803 Faucet holes on 8" (203mm) centers
(illustrated)
0186.403 Faucet holes on 4" (102mm) centers ❏ 0186.001 Center hole only
Nominal Dimensions: 559 x 432mm (22" x 17")
Bowl sizes:
406mm (16") wide 254mm (10") front to back 152mm (6") deep
SAVONA™
COUNTERTOP SINK
VITREOUS CHINA
Compliance Certications ­Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixture
To Be Specied:
Color: White Bone Linen
Silver Fawn Beige Black Faucet*: Faucet Finish: Supplies: 1-1/4" Trap:
* See faucet section for additional models available
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TR AP ARE
*
SUGGESTED. FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE TEMPLATE SUPPLIED WITH SINK. FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to c hange or cancellation. No responsibility is assumed for use of superseded or voided pages.
© 2008 AS America Inc.
J26
Revised 2/08
Loading...