LEXINGTON™ PEDESTAL SINK
OPE N TO
FLO OR
DRAIN
CHASE
876 mm
(34 -1/2)
FIN ISHED
WAL L
203mm
(8)
464 mm
(18 -1/4)
197 mm
(7- 3/4)
PEDESTAL ANCHOR
SCREW HOLES
(2)10mm (3/8) DIA.
565mm
(22-1/4)
70m m
(2- 3/4)
FIN ISHED
FLO OR
187 mm
(7- 3/8)
330 mm
(13 )
178 mm
(7)
1-1 /4 O.D .
WAS TE
10mm
(3/8)
254mm
(10)
19mm (3/4) DIA.
HOLES FOR
ANCHOR BOLTS
203 mm
(8)
610mm
(24-1/4)
102mm
(4)
*
286 mm
(11 -1/4)
*
178mm
(7)
SUPPLIES AS
REQUIRED
1-1 /4 O.D .
TAI LPIECE
• Minimalistic styled pedestal sink
• Made from vitreous china
• Rear overow
• Supplied with mounting kit
• Faucet ledge
Shown with 8871.902 Amarilis faucet with
Lexington handles (not included)
❏ 0178.514 Faucet holes on 8" (203mm) centers
(Illustrated)
❏ 0178.536 Center Hole only
Nominal Dimensions:
616 x 464 x 867mm
(24-1/4" x 18-1/4" x 34-1/2")
Separate Components:
❏ 0178.027 Pedestal top-8" (203mm) centers
❏ 0178.152 Pedestal top-center hole only
❏ 730500-400 Pedestal only
LEXINGTON™
PEDESTAL SINK
VITREOUS CHINA
Bowl sizes:
445mm (17-1/2") wide
276mm (10-7/8") front to back
143mm (5-5/8") deep
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Silver ❏ Fawn Beige ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
© 2008 AS America Inc.
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TR AP ARE
*
SUGGESTED.
▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKE FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to c hange or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J5
Revised 2/08