American Standard 0133.017, 0131.012 User Manual
HURON™ 4' RECESS BATH
OPTION AL TO FINIS HED FLOOR
(USUAL LY BETWEEN 1651mm (65)
& 1981 mm (78)
FINISH ED
WALL
C/L OF
VALVE
305mm
(12)
67 mm
(2-5/8 )
C/L OF
SPOUT
102mm
(4)
25mm
(1)
394mm
(15-1/ 2)
ROUGH
FLOOR
1181mm
(46-1/ 2)
19mm
(3/4)
19mm
(3/4)
SEE FI TTING SPECS .
FOR DI MENSION
191mm
(7-1/2 )
229mmx 305mm
(9x12) FLOOR
CUTOUT FOR
DRAIN
C/L OF
SUPPLI ES
22mm
(7/8)
C/L OF DRAIN OUTL ET
104mm
(4-1/1 6)
51mm
(2)
327mm
(12-7/ 8)
686mm
(27)
19mm
(3/4)
PLUMBE R NOTE –
PROVID E SUITABLE SUPPORT AT T HIS POINT
C/L OF
SHOWER ARM
FINISH ED
WALL
38mm
(1-1/2 )
1-1/2 O.D.
TAILPI ECE
1-1/2 N.P.T.
THREAD S
76mm
(3)
❏ 0131.012 Right hand outlet
❏ 0133.017 Left hand outlet
Product Features:
• Acid resisting, enameled steel construction
• One-piece recess bath
• Integral apron
• End drain outlet
• Full slip-resistant surface
• Straight tiling ange
Nominal Dimensions:
1181 x 686 x 394mm
(46-1/2" x 27" x 15-1/2")
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.4 for Enameled Steel Plumbing
Fixtures
• ASTM F-462 for Slip-resistant Bathing Facilities
HURON™ 4'
RECESS BATH
ENAMELED STEEL
To Be Specied:
❏ Color:
❏ Bath Faucet*:
❏ Faucet Finish:
❏ Drain:
* See faucet section for additional models available
© 2008 AS America Inc.
NOTES:
0133.017 LEFT HAND OUTLET (SHOWN).
0131.012 RIGHT HAND OUTLET (REVERSE DIMENSIONS).
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH FOR
ADDITIONAL INFORMATION.
SHOWN WITH POP-UP C.D. & O.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
CONCEALED PIPING NOT INCLUDED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.4. These measurements
are subject to change or cancellation. No responsibility is assumed for use of
superseded or voided leaet.
H164
Revised 2/08
Loading...