American Fibertek RR-94800C-SL, RT-94800C-SL User Manual
f
f
f
f
f
f
i afi a
i afi afi a
i afi afi a
afia
a
i
i afi afi a
i
Instruction Manual
RT-94800C-SL
RR-94800C-SL
Forty-Eight Channel Video Multiplexer
10/30/2012 JPK
Table of Contents
Functional Description ........................................................................3
RT-94800C-SL Components...............................................................4
RR-94800C-SL Components..............................................................5
Power Connections.............................................................................5
Fiber Connections...............................................................................6
Video Input / Output Connections.......................................................7
RT-980C Series Status LED Indicators...............................................8
RR-980C Series Status LED Indicators..............................................9
Warranty / Service Information .........................................................10
2
INSTALLATION AND OPERATION INSTRUCTIONS
INTRODUCTION
Thank you for purchasing your American Fibertek Series 94800C-SL singlemode forty-eight
channel video multiplexer. Please take a few minutes to read these installation instructions in
order to obtain the maximum performance from this product.
FUNCTIONAL DESCRIPTION
The 94800C-SL Series units operate as a transmitter / receiver pair for the digital transmission
of forty-eight simultaneous NTSC or PAL video signals over one singlemode fiber optic cable.
The RT-94800C-SL transmitter accepts up to forty-eight video inputs in six groups containing
eight videos each and multiplexes each. The first group’s serial data stream modulates a laser
at 1470nm wavelength. The second group’s serial data stream modulates a laser at 1490nm
wavelength. This pattern is repeated for group’s three through six using wavelengths 1510nm
through 1570nm respectively. A Course Wave Division Multiplexer (CWDM) combines these six
wavelengths onto single optical output port for connection to the fiber transmission system.
Correspondingly, the RR-94800C-SL receiver converts the optical signal to forty-eight
independent video output.
The 94800C-SL Series product is designed to operate over an optical loss budget range of 0dB
to 21dB on 9um singlemode fiber. Refer to the product specification sheet for additional
performance data.
INSTALLATION
THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND
SHOULD CONFORM TO THE NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 AND LOCAL
CODES.
3
Loading...