American Fibertek MX-49-LX-SL-ST, MX-49-LX-SL-SC, MX-49-LX-SL-1F-ST, MX-49-LX-SL-1F-SC Specsheet
(2) 10/100/1000Base-T & (2) 1000Base-LX
Ethernet 4 Port Switch / Drop & Repeat Transceiver
FEATURES:
♦ Complete Fiber Optic to Twisted Pair
Media Interface
♦ Drop and Repeat Capability
♦ Auto MDI / MDIX Detection
♦ Link and Activity Indicators for UTP
and Fiber Ports
♦ Singlemode and Multimode Fiber
Versions Available
♦ Triple Speed Copper Ports
SPECIFICATIONS:
Ethernet:
Data Rate
Auto negotiated...10/100/1000 Mb/s
Connector.................................RJ45
Optical:
One Fiber.................. 1310/1550 nm
Two Fiber……………………1310 nm
Distance
LX 9/125u............................ 10 km
Loss Budget ...........................10 dB
Connector..........................….SC,ST
Power:
Voltage ................................ 12 VDC
Current............................. < 500 mA
Connector........2 Pin Terminal Block
Power Supply:
Module: 12VDC (Part #: PS-12D+)
Environmental:
Temperature...........-40
o
C to +75 °C
Humidity.........................5 % to 95 %
Size:
Module...……………4¼” x 4¼” x 1
1
/8”
3/14/11JPK
The American Fibertek 49SL Series transmits and receives (2) copper
10/100/1000 BaseT Ethernet signals at the RJ45 ports and (2) optical
1000 Base-X over 1 or 2 singlemode fibers. The system is comprised
of two or more units forming a communications link.
The system is designed to be completely transparent with auto
negotiation features which automatically configures the unit for the
correct speed (10/100/1000 BaseT). Auto MDI/MDIX operation
eliminates the potential need for crossover cables. Diagnostic
indicators provide a quick visual indication of system status.
ORDERING INFORMATION:
MX-49-LX-SL-SC Two Fiber/Port, Module LX Singlemode SC Connector
MX-49-LX-SL-1F-SC One Fiber/Port, Module LX Singlemode SC Connector
MX-49-LX-SL-ST Two Fiber/Port, Module LX Singlemode ST Connector
MX-49-LX-SL-1F-ST One Fiber/Port, Module LX Singlemode ST Connector
49SL
SERIES
SINGLEMODE
10/100/1000Base-T to 1000Base-LX
Ethernet Media Converter / 4 Port Switch
FEATURES:
Complete Fiber Optic to Twisted Pair
Media Interface
Auto MDI / MDIX Detection
Auto Negotiate
Link and Activity Indicators for UTP
and Fiber Ports
Singlemode and Multimode Fiber
Versions Available
SPECIFICATIONS:
Ethernet:
Data Rate:
Auto negotiated..........10/100/1000 Mb/s
Connector...................................... RJ45
Optical:
One Fiber.........................1310/1550 nm
Two Fiber..................................1310 nm
Distance
LX 9/125u ..................................10 km
Loss Budget ................................. 10 dB
Connector................................... SC, ST
Power Supply:
Rack Card: ...........(AFI Part #: SR-20/2)
Environmental:
Temperature................ -40
Humidity..............................5 % to 95 %
Size:
Rack Card One Slot…….....6½” x 1” x 5”
°C to +75 °C
ORDERING INFORMATION:
RX-49-LX-SL-AA Two Fiber Per Port Rackcard
RRX-49-LX-SL-AA One Fiber Per Port Rackcard
Replace AA with ST or SC to specify the desired
optical connector
9/10/11JPK
The American Fibertek RX-49-SL Series transmits and receives (2) copper
10/100/1000 Base-T Ethernet signals at the RJ45 ports and (2) optical 1000
Base-X at the fiber ports. Both single fiber and dual fiber versions of the
optics are available.
A single rackcard unit is capable of connecting up to (2) Series MX/MTX-48SL (on a separate datasheet) modules which provides th e benefit of reduci ng
the number of rackcards and corresponding subrack space and power
supplies.
The system is designed to be completely transparent with auto negotiation
features which automatically configures the unit for the correct speed
(10/100/1000 Base-T). Auto MDI/MDIX operation eliminates the potential
need for crossover cables. Diagnostic indicators provide a quick visual
indication of system status.
Equipment may be ordered as stand alone modules or rack cards that are
mounted in the American Fibertek Card Cage: SR-20/2
MTX-48-SL
Series
Fibers
MTX-48-SL
Series
RX-49-SL
SERIES
SINGLEMODE
RRX-49-SL
Series
Loading...