American Dynamics ADSL940A Specsheet

Camera Accessories

Even the very best cameras can

only take you so far without the

right accessories. From housings,

to mounts, to the highest

resolution lenses, we have the

accessories that will give you the

best images.

IP Dome Housings

IP SpeedDome Outdoor Housings:

t Temperature-controlled interior

environment

t Automatic defog and defrost

heater cycle modes

t Temperature controlled heater/

blower, prevents excessive ice buildup, removing accumulation within 60 minutes.

t On-demand menu through the

web interface displays housing temperature and humidity

IP SpeedDome Indoor Housings:

t Precision-crafted bubbles

maintain the integrity of light and image

t Four alarm inputs, one output

t Surge and lightning protection

of video, data, alarm input and output, and power

t Plug and play connectors enable

easy servicing of environmental board

t Ceiling, pole, roof, wall, and

corner mounts available

t Meets IP66/NEMA 4 specifications

t Reinforced high impact design

with vandal resistant option

t Dimensions:

Height: 321 mm (12.64 in) Diameter: 244 mm (9.61 in)

t Weight:

With dome: 3.15 kg (6.95 lbs) Without dome: 2.06 kg (4.54 lbs)

t Reinforced high impact design

with vandal resistant option

t Dimensions:

Height: 321 mm (12.64 in) Diameter: 244 mm (9.61 in)

t Weight (ADVESDHIC,

ADVESDHIS): With dome: 2.86 kg (6.3 lbs) Without dome:1.7 kg (3.75 lbs)

t Weight (ADVESDHICVR,

ADVESDHISVR): With dome: 3.46 kg (7.63 lbs) Without dome: 2.3 kg (5.07 lbs)

MODEL NUMBERS

ADVESDHOC

ADVESDHOS

ADVESDHOVRS

MODEL NUMBERS

ADVESDHIC

ADVESDHIS

ADVESDHICVR

ADVESDHISVR

IP Top Hat Housing:

t Metal enclosure houses a dome

t Includes trim ring and plastic base

t Mounts directly to a ceiling or

indoor mounting structure

t Plenum rated

American Dynamics 38

MODEL NUMBERS

ADVESDHRDCLGC

Clear

ADVESDHRDCLGS

Smoked

ADVESDBASE

Direct to Ceiling

Analog Dome Housings

SpeedDome Ultra Pressurized Outdoor Housings*:

t Durable engineered plastic top,

UV protected

t Temperature-controlled interior

environment

t Heater and blower standard

t IP67/NEMA 4x

t Pressurized to 5 psi with a

Schrader valve

t Low pressure alarm

t Pendant, wall, or corner mount

Pressure relief valve

available

t Bubble assembly affixed to the top

with nine screws

Outdoor Housings:

t Reinforced high-impact design

t Temperature-controlled interior

t Choose from clear or smoked

t IP66/NEMA 4

t Class 2 LPS certified

t Includes integrated I/O base

t Four tamper-resistant screws with

t Surge and lightning protection

t On demand fog and defrost

t Four alarm inputs, one output

environment

bubble

that can store presets/patterns programming to base

driver bit included

of video, communications, alarm input and output, and power

heater cycle modes prevent and quickly remove accumulated ice

t Includes integrated I/O base

with diagnostic power and communications LEDs (Note: I/O base used does not currently support storage of presets/ patterns/programming)

t Surge and lightning protection

of video, communications, alarm input and output, and power

t Choose from clear or smoked

bubble

t Dimensions:

Height: 325 mm (12.8 in) Diameter: 409 mm (16.1 in)

t Weight with dome: 3.63 kg (8.0 lbs)

t Integrated Unshielded Twisted

Pair (UTP) simplifies wiring and installation

t Dimensions:

Height: 321 mm (12.64 in) Diameter: 244 mm (9.61 in)

t Weight:

With dome: 3.15 kg (6.95 lbs) Without dome: 2.06 kg (4.54 lbs)

Vandal Resistant Series:

t Visually identical to the outdoor

version to maintain consistent appearance

t Includes integrated I/O base

that can store presets/patterns programming to base

t Four alarm inputs, one output

t Weight:

With dome: 3.86 kg (8.49 lbs) Without dome: 2.80 kg (6.20 lbs)

MODEL NUMBERS

RHODULP-01

RHODULP-02

Accessories

WM20G (Wall mount)

ACA2 (Corner mount)

APM3 (Pole mount)

RHONKIT**

(Nitrogen recharge kit)

RHONREG

(Regular & Hose)

RHONTANK

(Nitrogen recharge tank)

MODEL NUMBERS

ADSDUHOC

ADSDUHOS

ADSDUHOVC

ADSDUHOVS

Upgrade Kits

RHCLRVRKIT

RHSMKVRKIT

* Note: For prop er per for mance, th is dome h ousin g must be pre ssuri zed usin g 99.998% dr y nitro gen. ** Contact your salesperson for recharge kit availability in your geographic region.

American Dynamics 39

Analog Dome Housings

Indoor Housings:

t Reinforced high-impact design

t Choose from clear or smoked bubble

t Four tamper-resistant screws with

driver bit included

t Surge and lightning protection of

video, communications, alarm input and output, and power included

t Integrated Unshielded Twisted Pair

(UTP) simplifies wiring and installation

t Stainless steel bubble cage and

choose from clear or smoked bubble

t Durable bubble meets impact

standard ANSI 87.1

t Retrofit kit available to upgrade

existing SpeedDome Ultra housings

t Dimensions:

Height: 321 mm (12.64 in) Diameter: 244 mm (9.61 in)

Indoor Top Hat Housings:

t Metal enclosure houses a dome

t Includes trim ring and plastic base

t Mounts directly to a ceiling or

indoor mounting structure

t Plenum rated

t Weight:

With dome: 2.80 kg (6.20 lbs) Without dome: 1.60 kg (3.50 lbs)

Vandal Resistant Series:

t Visually identical to the outdoor

version to maintain consistent appearance

t Includes integrated I/O base that can

store presets/patterns programming to base

t Four alarm inputs, one output

t Weight:

With dome: 3.50 kg (7.70 lbs) Without dome: 2.30 kg (5.10 lbs)

t Dimensions:

157 x 175 x 175 mm (6 x 7 x 7 in)

t Weight: .77 kg (1.77 lbs)

MODEL NUMBERS

ADSDUPIHC

ADSDUPIHS

ADSDUPIVRC

ADSDUPIVRS

Upgrade Kits

RHCLRVRKIT

RHSMKVRKIT

MODEL NUMBER

RHIUTH

American Dynamics 40

Indoor Mounts and Mount Adapters

INDOOR MOUNTING OPTIONS

Mount Description Compatibility Construction Dimensions Weight

I-Beam Mount Assembly

Indoor Pendant Mount

Hard Ceiling Bracket

Fixed Bracket

Adjustable Bracket

2’ x 2’ Tile Mount

2’ x 2’ Tile Pendant Mount

2’ x 2’ Tile Mount Plate

This assembly allows the dome to be suspended from an I-beam; and includes a clamp, pipe tee nipple, and ﬂange. The clamp attaches to a 1.25 inch pipe, provided by the customer, then afﬁxes to the pendant hardware. The housing or dome assembly also mounts to the structure.

This mount suspends a SpeedDome Ultra or a SpeedDome Optima housing from a ceiling or horizontal surface. It can be installed using either 1.25 inch NPT threaded pipe or rigid conduit, new or existing, up to 10' (3 meters) in length.

This bracket enables the Top Hat housing to be recessed in the ceiling (requires RHIUTH Top Hat). The bracket is mounted to the Top Hat and installed in a hole cut in the ceiling - perfect for sheet rock, plaster or solid ceilings. The hard ceiling bracket can be installed entirely from below the ceiling; the installer will not have to access the area above the ceiling to install it.

Used with the RHIUTH Top Hat, this bracket enables the housing to be recessed in the ceiling or in a 2-foot drop ceiling tile. The bracket is mounted to the Top Hat housing and installed in a hole cut in the ceiling. The bracket distributes the weight of the dome and Top Hat housing across the T-bar framework of the ceiling. It is also very useful for sheet rock, plaster, or solid ceilings.

Used with the RHIUTH Top Hat, this bracket enables the housing to be recessed in drop ceilings that utilize anything other than 2-foot grids. The bracket distributes the weight of the dome and the Top Hat housing across the T-bar framework of the ceiling and is adjustable from 632-1219 mm (24-48 in)

This mount enables the Top Hat housing to be recessed in a 2' x 2' drop tile ceiling. The ceiling tile is removed and the white tile mount is simply dropped in its place. A Top Hat housing and plastic base are included in the kit.

This mount enables the pendant mount to be installed in a 2' x 2' drop tile ceiling. The Top Hat housing/dome assembly also mounts to the structure. The mounting kit includes a 2' x 2' plate and pendant hardware. The plate attaches to a 1.25 inch pipe, provided by the customer, then afﬁxes to the Top Hat housing/dome assembly. If mounting a SpeedDome Optima with this model, a RHOPN ceiling pendant mount kit is required.

This mount enables the dome to be recessed in a 2' x 2' drop tile ceiling. The ceiling tile is removed and the tile mount is simply dropped in its place.

SpeedDome

Ultra Series and

IP SpeedDome

SpeedDome Ultra, Optima Series, and IP

SpeedDome

Ultra Series

SpeedDome

Ultra Series

SpeedDome

Ultra Series

SpeedDome

Ultra Series

SpeedDome

Ultra and Optima

Series

SpeedDome

Optima Series

Steel and

Galvanized

steel

Powder-coated

aluminum and

ABS plastic

Galvanized

steel

Galvanized

steel

Galvanized

steel

Powder-coated

aluminum and

ABS plastic

Powder-coated

aluminum and

ABS plastic

Painted

aluminum

6 m [max.] x

293 x 127 mm

(20 ft [max.] x 12 x 5 in)

115 x 120 x 120 mm

(4 .5 x 5 x 5 in)

212 x 179 x 56 mm

(8 x 7 x 2 in)

180 x 632 x 100 mm

(7 x 24 x 4 in)

180 x 1219 x 100 mm

(7 x 48 x 4 in)

190 x 607 x 607 mm

(7 x 24 x 24 in)

47 x 605 x 605 mm

(2 x 23 x 23 in)

47 x 605 x 605 mm

(2 x 23 x 23 in)

2.9 kg

(6.4 lbs)

1.8 kg (4 lbs)

70 kg

(1.6 lbs)

1.8 kg (4 lbs)

2.3 kg (5 lbs)

2.7 kg (6 lbs)

5.4 kg

(12 lbs)

1.7 k g

(3.8 lbs)

Model

Number

RHIUIBM

RHOPN

RHIUHC

RHIUFB

RHIUAB

RHIU2X2M

RHIU2X2P

RH2X2

American Dynamics 41

Indoor Mounts and Mount Adapters

INDOOR MOUNTING OPTIONS

Mount Description Compatibility Construction Dimensions Weight

3.5 inch x 3.5 inch Mounting Plate

4 inch x 4 inch Mounting Plate

This mounting plate attaches the dome to a standard

3.5 inch x 3.5 inch duplex electrical box that is installed in the ceiling. The Top Hat housing/dome assembly also mounts to the structure.

This mounting plate attaches the dome to a standard 4 in x 4 in duplex electrical box that is installed in the ceiling. The Top Hat housing/ dome assembly also mounts to the structure.

SpeedDome Ultra

Series and IP

SpeedDome

SpeedDome Ultra

Series

Galvanized steel

2 x 90 x 90 mm

(.08 x 3 x 3 in)

2 x 105 x 105 mm

(.08 x 4 x 4 in)

.09 kg (.2 l bs)

.14 kg (.3 lbs)

Model

Number

RHIU3X3

RHIU4X4

Wall/Corner Mount-Short

Wall/Corner Mount -Long

Wall Mount with Short End Cap Assembly

Wall Mount with Long End Cap Assembly

This mounting structure attaches directly to a ﬂat wall, inside corner, or outside corner. The Top Hat housing/dome assembly mounts to the structure for a quick and easy installation.

This mount, .6 m (24 in), positions the dome away from the wall, enabling it to see over furniture, shelving, and displays. It attaches directly to a ﬂat wall, inside corner, or outside corner. The Top Hat housing/dome assembly also mounts to this structure.

This mounting structure attaches directly to a ﬂat wall. When used with the RHOWCA corner bracket adapter or RHOWPA pole strap adapter it can be af ﬁxed to corners as well as poles. A mounting cover conceals the mounting plate for a more attractive appearance.

This mount attaches directly to a ﬂat wall, positioning the dome away from the wall, so that it can see over furniture, shelving, and displays. When used with the RHOWCA corner bracket adapter or RHOWPA pole strap adapter it can be afﬁxed to corners as well as poles. A mounting cover conceals the mounting plate for a more attractive appearance.

SpeedDome Ultra

Series

SpeedDome Ultra

Series

SpeedDome

Ultra,

Optima Series, and

IP SpeedDome

SpeedDome

Ultra,

Optima Series, and

IP SpeedDome

Galvanized steel

Painted steel

Powder-coated aluminum, ABS

plastic, and ﬁber-

ﬁlled PVC

Powder-coated aluminum, ABS

plastic, and ﬁber-

ﬁlled PVC

With dome installed 224 x 101 x 201 mm

(9 x 4 x 8 in)

With dome installed 413 x 123 x 772 mm

(17 x 5 x 31 in)

With dome installed 366 x 218 x 282 mm

(14 x 9 x 11 in)

With dome installed 366 x 218 x 282 mm

(14 x 9 x 23 in)

1.8 kg (4 lbs)

2.7 kg (6 lbs)

1.3 kg (3 lbs)

1.7 k g

(3.9 lbs)

INDOOR ADAPTER OPTIONS

Adapter Description Compatibility Construction Dimensions Weight

Corner Bracket Adapter

Pole Strap Adapter

SpeedDome Housing Adapter

End Cap Assembly

This adapter attaches the long and short wall mounts (RHOSW & RHOLW) to outside corners. Powdercoated aluminum construction ensures an extremely sturdy installation.

This adapter attaches the long and short wall mounts (RHOSW & RHOLW) to outside corners. This kit contains stainless steel straps that can be daisy-chained to accommodate any size pole and all the necessar y mounting hardware.

This adapter retroﬁts a SpeedDome Ultra into an existing SpeedDome housing via snap-hinge mounts, making installation fast and easy. This kit includes a skirt assembly to compensate for the smaller dimensions of the SpeedDome Ultra.

This mounting assembly retroﬁts any existing outdoor SpeedDome wall, pole, corner, or over-the-roof mount to accommodate newer outdoor housings. A modular design lets you mount the housing to the end cap on the ground, before installing it on the mounting pole, making the process safe and easy.

SpeedDome

Ultra, Optima

Series, and IP

SpeedDome

Ultra, Optima

Series, and IP

SpeedDome

SpeedDome Ultra

Series

SpeedDome

Ultra, Optima

Series, and IP

SpeedDome

Powder-coated

aluminum

Powder-coated

aluminum and stainless steel

Anodized aluminum

Fiber-ﬁlled PVC

185 x 210 x 125 mm

(7 x 8 x 5 in)

138 x 79 x 27 mm

(5 x 3 x 1 in)

Straps support

53 to 951 mm

(2 to 30 in)

pole diameter

106 x 205 x 250 mm

(4 x 8 x 10 in)

64 x 103 x 194 mm

(3 x 4 x 8 in)

.79 kg

(1.75 lbs)

.5 kg

(1.1 lbs)

1.4 kg (3 lbs)

.32 kg (.7 lb s)

RHIUCM

RHIULWM

RHOSW

RHOLW

Model

Number

RHOWCA

RHOWPA

RHSDA

ROENDC

American Dynamics 42

Outdoor Mounts and Mount Adapters

OUTDOOR MOUNTING OPTIONS

Mount Description Compatibility Construction Dimensions Weight

Short Wall Mount with End Cap Assembly

Long Wall Mount with End Cap Assembly

Outdoor Pendant Mount

Over-the -Roof Mount with End Cap Assembly

This mounting structure attaches directly to a ﬂat wall. When used with the RHOWCA corner bracket adapter or RHOWPA pole strap adapter it can be af ﬁxed to corners as well as poles. A mounting cover conceals the mounting plate for a more attractive appearance.

This mount attaches directly to a ﬂat wall, positioning the dome away from the wall, so that it can see over furniture, shelving, and displays. When used with the RHOWCA corner bracket adapter or RHOWPA pole strap adapter it can be afﬁxed to corners as well as poles. A mounting cover conceals the mounting plate for a more attractive appearance.

This mount suspends an outdoor dome housing from an outdoor ceiling or horizontal surface. It can be installed using either new or existing

1.25 inch NPT threaded pipe or rigid conduit up to 3 meters (10 feet) in length.

This mount afﬁxes directly to any wall, rooftop wall, or parapet, positioning the dome away from the wall, so that it can see over awnings, sofﬁts, and landscaping. Opposing wing brackets secure installation to the roof surface, while allowing the pole to be repositioned for easy service access.

SpeedDome Ultra

Series and IP

SpeedDome

SpeedDome Ultra

Series and IP

SpeedDome

SpeedDome Ultra

Series and IP

SpeedDome

SpeedDome Ultra

Series and IP

SpeedDome

Powder-coated aluminum, ABS

plastic, and ﬁber-

ﬁlled PVC

Powder-coated aluminum, ABS

plastic, and ﬁber-

ﬁlled PVC

Powder-coated aluminum, ABS

plastic

Powder-coated aluminum, ABS

plastic, and ﬁber-

ﬁlled PVC

With dome installed

366 x 218 x 282 mm

(14 x 9 x 11 in)

With dome installed

366 x 218 x 587 mm

(14 x 9 x 23 in)

115 x 120 x 120 mm

(4.5 x 5 x 5 in)

1098 x 243 x 473 mm

(43 x 10 x 19 in)

1.3 kg (3 lbs)

1.7 k g

(3.9 lbs)

1.8 kg (4 lbs)

5.7 kg

(12.7 lbs)

Model

Number

RHOSW

RHOLW

RHOPN

RHOTR

OUTDOOR ADAPTER OPTIONS

Adapter Description Compatibility Construction Dimensions Weight

Corner Bracket Adapter

Pole Strap Adapter

Floor Adapter for RHOTR

End Cap Assembly

This adapter attaches the long and short wall mounts (RHOSW & RHOLW) to af ﬁx to outside corners. Powder-coated aluminum construction ensures an extremely sturdy installation.

This adapter attaches the long and short wall mounts (RHOSW & RHOLW) to outside corners. This kit contains stainless steel straps that can be daisy-chained to accommodate any size pole and all the necessar y mounting hardware.

This adapter installs the RHOTR over-the-roof mount on horizontal and vertical roof/parapet surfaces. Multiple fastening positions provide versatility for mounting on any combination of surfaces and angles.

This mounting assembly retroﬁts any existing outdoor SpeedDome wall, pole, corner, or over-the-roof mount to accommodate newer outdoor housings. A modular design lets you mount the housing to the end cap on the ground, before installing it on the mounting pole, making the process safe and easy.

SpeedDome Ultra

Series and IP

SpeedDome

SpeedDome Ultra

Series and IP

SpeedDome

SpeedDome Ultra

Series and IP

SpeedDome

SpeedDome Ultra

Series and IP

SpeedDome

Powder-coated

aluminum

Powder-coated

aluminum and stainless steel

Powder-coated

aluminum

Fiber-ﬁlled PVC

185 x 210 x 125 mm

(7 x 8 x 5 in)

138 x 79 x 27 mm

(5 x 3 x 1 in)

Straps support

53 to 951 mm (2 to 30

in) pole diameter

369 x 240 x 240 mm

(15 x 10 x 10 in)

64 x 103 x 194 mm

(3 x 4 x 8 in)

79 kg

(1.75 lbs)

.5 kg

(1.1 lbs)

2.59 kg

(5.75 lbs)

.32 kg (.7 lb s)

Model

Number

RHOWCA

RHOWPA

ROTRF

ROENDC

American Dynamics 43

American Dynamics SpeedDomes

are pivotal to the integrated

security system that help Aetna Inc.

streamline operations at nearly 100

field offices and consequently cut

costs.