American Dynamics ADCC0200, ADCC0300 Quick Reference Guide

7

0

ControlCenterTM ADCC0200 and ADCC0300
Keyboard Quick Reference Guide

Keyboard Settings

The default setting for the keyboard is RS485 mode at 19200 baud. To change these settings,
enter the Special Config menu by pressing SHIFT (

) and CLEAR ( ) keys within five

seconds of powering up the keyboard. Then press one of the following:

to change baud rate.

to change the mode (ADNet RS485, RS232).

to select Auto Repeat or Make/Break mode. See the matrix manual for correct setting.

to enable/disable the speaker.

Standard Matrix Operations

FEATURE KEYBOARD COMMAND ADCC0200 ADCC0300

RS485 RS232 RS485 RS232

Select Monitor Monitor number ®

Select Camera Camera number ® üü ü ü
Select Matrix/Site Site number ® AND üü ü ü

Telemetry Enable/Disable üû ü û
Pan Left/Right Joystick Left/Right üü ü ü
Tilt Up/Down Joystick Up/Down üü ü ü
Zoom In (or Twist Joystick Clockwise) üü ü ü
Zoom Out (or Twist Joystick Anti-CW) üü ü ü
Focus Near üü ü ü

Focus Far üü ü ü
Iris Open üü ü ü

Iris Close üü ü ü
Flip üü ü ü

Engage Auto Iris AND , , or üü ü ü
Engage Auto Focus AND , , or üü ü ü
Select Preset Preset number ® üü ü ü
Record Preset ® Preset number ® üû ü ü
Manually Trigger Alarm ® Alarm number ® üû ü û
Acknowledge Alarm üü ü ü
Select Sequence Sequence number ® üü ü ü
Select View View number ® üû ü û
Select Salvo Salvo number ® AND ûü ûü

üü ü ü

1

ADCC0200 and ADCC0300Quick Reference Guide

Standard Matrix Operations (continued)

FEATURE KEYBOARD COMMAND ADCC0200 ADCC0300

RS485 RS232 RS485 RS232

Run Tour Tour number ®
Hold Tour AND üü ü ü
Restart Current Tour üü ü ü
Last and Next Camera or üü ü ü

(When Tour Held)

F1 Function Function number ®
F2 Function Function number ® AND ûû û ü

üü ü ü

ûü ûü

Matrix Menu Operations

FEATURE KEYBOARD COMMAND ADCC0200 ADCC0300

RS485 RS232 RS485 RS232

Enter Menu Mode
Move Cursor Up Joystick Up üû üü
Move Cursor Down Joystick Down üû üü
Move Cursor Left Joystick Left üû ü û
Move Cursor Right Joystick Right üû ü ü

Page Up (if available) AND Joystick Up üû ü ü
Page Down (if available) AND Joystick Down üû ü ü
Page Left (if available) AND Joystick Left üû ü ü
Page Right (if available) AND Joystick Right üû üü
Menu Select ENTER key üû üü
Menu Escape RS232: AND - û - ü

AND üû ü ü

RS485: ü - ü -

2