SUPER AD-50 Parts Manual
24 VAC
1994 thru 2001
MODELS: ADG-50DS
ADE-50S
ADS-50S
American Dryer Corporation
88 Currant Road
Fall River, MA02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: techsupport@amdry.com
www.amdry.com
ADC Part No. 450302
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables dans le voisinage de cet appareil ou de yout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________ MODEL NO. |
__________________________________________ |
|
SUPER AD-50 |
||
RESELLER’S NAME |
_______________________________________________________________________________________ |
|
Serial Number(s) |
________________________________________________________________________________________ |
|
|
________________________________________________________________________________________ |
|
|
________________________________________________________________________________________ |
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.
Table of Contents |
|
Control DoorAssembly Without Trim |
|
For Non-Coin Models Mfd. as of July 13, 1998 ............................................................................... |
3 |
High Security Control DoorAssembly |
|
For All Coin Models and Non-Coin Models Mfd. prior to July 13, 1998 ........................................... |
4 |
Phase 5 Coin Microprocessor Control PanelAssembly ........................................................................... |
5 |
Phase 5 Non-Coin Microprocessor Control PanelAssembly ................................................................... |
6 |
Phase 5 Coin and Non-Coin Microprocessor Control BoxAssembly ...................................................... |
7 |
Dual Timer “Tap Touch” Controls |
|
For Models Mfd. as of November 3, 2000 ....................................................................................... |
8 |
DualTimer Control PanelAssembly |
|
For Models Mfd. prior to November 3, 2000 ................................................................................... |
9 |
DualTimer Control BoxAssembly ........................................................................................................ |
10 |
Non-Microprocessor Coin Meter Control PanelAssembly .................................................................... |
11 |
Non-Microprocessor Coin Meter Control BoxAssembly ...................................................................... |
12 |
Coin Meter Replacement Parts ............................................................................................................. |
13 |
CoinVaultAssembly ............................................................................................................................. |
14 |
“Plastic” Main DoorAssembly .............................................................................................................. |
15 |
Main Door SwitchAssembly For “Plastic” Door ................................................................................... |
16 |
Front PanelAssembly For “Plastic” Door .............................................................................................. |
17 |
Main Door “Steel”Assembly ................................................................................................................ |
18 |
Main Door SwitchAssembly Cold Rolled Steel Door ............................................................................ |
19 |
Cold Rolled Steel Door Front Panel ...................................................................................................... |
20 |
LintTrapAssembly ............................................................................................................................... |
21 |
Drop Lint DoorAssembly Without Trim |
|
For Non-Coin Models Mfd. as of July13, 1998 .............................................................................. |
22 |
Drop Lint DoorAssemblyWith Trim |
|
For All Coin Models and Non-Coin Models Mfd. prior to July 13, 1998 ......................................... |
23 |
Tumbler/SupportAssemblies ................................................................................................................. |
24 |
Idler BearingAssembly ......................................................................................................................... |
25 |
TumblerBearingAssembly .............................................................................................................. |
26, 27 |
Non-Reversing Totally Enclosed, Fan-Cooled Motor MountAssembly ............................................ |
28, 29 |
Reversing Totally Enclosed, Fan-Cooled Motor MountAssembly .................................................... |
30, 31 |
Sensor BracketAssemblies ............................................................................................................. |
32, 33 |
Direct Spark Ignition BurnerAssembly ............................................................................................ |
34, 35 |
Electric OvenAssembly .................................................................................................................. |
36, 37 |
Steam Coil/Air Operated Steam DamperAssembly ......................................................................... |
38, 39 |
SailSwitch/Hi-LimitAssembly .............................................................................................................. |
40 |
Single-Phase (1Ø) Motor, Electric Relay PanelAssembly ...................................................................... |
41 |
3-Phase (3Ø) Motor, Electric Relay PanelAssembly ............................................................................. |
42 |
Microprocessor Reversing Rear Control BoxAssembly ......................................................................... |
43 |
Dual Timer Reversing Rear Control BoxAssembly ................................................................................ |
44 |
Outer Top/Back GuardAssemblies ....................................................................................................... |
45 |
Electric Oven Chart .............................................................................................................................. |
46 |
Transformer Listing Gas/Steam Dryers .................................................................................................. |
47 |
Transformer Usage Listing For Electric Dryers ....................................................................................... |
48 |
Microprocessor CoinAcceptors Listing ................................................................................................ |
49 |
Additional PartsAvailable ..................................................................................................................... |
50 |
Control Door Assembly Without Trim
For Non-Coin Models Mfd. as of July 13, 1998
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Illus. No. |
Part No. |
Qty. |
Description |
||
1 |
881053 |
1 |
ADC Logo Only (with double adhesive tape) |
|||
|
|
870011 |
1 |
Logo Double Tape Kit |
||
2 |
882265* |
1 |
Control Door |
|||
|
|
|
|
(includes illus. nos. 2 and 3) |
||
3 |
117604 |
4 |
Neoprene Sponge Tape (sold by the foot) |
|||
4 |
150300 |
4 |
#10 x 1/2” Hex Washer TEK Screw |
|||
5 |
102603 |
1 |
Control Door Rod Support Catch |
|||
6 |
102601 |
1 |
Control Door Retainer Clip |
|||
7 |
102502 |
1 |
Control Door Support Rod |
|||
8 |
882541 |
2 |
Spring Turn Latch Assembly |
*Specify color when ordering.
450302-5 |
Telephone: (508) 678-9000 / www.amdry.com |
3 |
High Security Control Door Assembly
ForALL Coin Models and Non-Coin Models Mfd. prior to July 13, 1998
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Illus. No. |
Part No. |
Qty. |
|
|
Description |
||
1 |
|
160015 |
1 |
|
|
High Security MK-100 Lock Assembly with Key (for coin models Only) |
|
|
|
160104 |
1 |
|
|
MK-100 Key Only |
|
|
|
160017 |
1 |
|
|
Special Dummy Lock Only (for non-coin models Only) |
|
2 |
|
160032 |
1 |
|
|
Lock Cam Only |
|
3 |
|
881053 |
1 |
|
|
ADC Logo with Tape Kit |
|
|
|
112350 |
1 |
|
|
ADC Logo Only |
|
|
|
870011 |
1 |
|
|
Double Sided Tape Kit |
|
4* |
800022 |
1 |
|
|
High Security Control Door Assembly Less Lock |
||
|
|
|
|
|
|
(includes illus. nos. 4 through 7) |
|
|
|
800141 |
1 |
|
|
High Security Stainless Steel Control Door Assembly Less Lock |
|
|
|
|
|
|
|
(includes illus. nos. 4 through 7) |
|
5 |
|
180201 |
1 |
|
|
Top Trim with Lock Hole |
|
6 |
|
117603 |
3 |
|
|
Suppressor Tape/Gasket (sold by the foot) |
|
7 |
|
150201 |
5 |
|
|
#10-32 x 1/4” Phillips Round Head Machine Screw |
|
8 |
|
150300 |
4 |
|
|
#10 x 1/2” Hex Washer TEK Screw |
|
9 |
|
102603 |
1 |
|
|
Control Door Support Rod Catch |
|
10 |
102601 |
1 |
|
|
Control Door Rod Retainer Clip |
||
11 |
102502 |
1 |
|
|
Control Door Support Rod |
*Specify color when ordering.
4 |
American Dryer Corporation |
450302-5 |
Phase 5 Coin Microprocessor Control Panel Assembly
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Illus. No. |
Part No. |
Qty. |
Description |
||||||||
1 |
112526 |
1 |
Coin Keyboard Label Assembly |
||||||||
2 |
801213 |
1 |
Phase 5 Coin Control Panel Assembly |
||||||||
|
|
|
(includes illus. nos. 1, 2, 4 through 6 and 11) |
||||||||
|
801229 |
1 |
Phase 5 Coin Control Panel Assembly with Battery Option |
||||||||
|
|
|
(includes illus. nos. 1, 2, 4 through 6 and 11) |
||||||||
|
801259 |
1 |
Coin Control Panel Only |
||||||||
|
801258 |
1 |
Coin Control Panel with Battery Bracket |
||||||||
3 |
150309 |
1 |
#10-16 x 1/2” Hex Head TEK Crimptite Screw |
||||||||
4 |
137213 |
1 |
Phase 5 Coin Controller Only |
||||||||
|
824998 |
1 |
Phase 5 Battery Clip |
||||||||
5 |
153010 |
2 |
#6 Star Washer |
||||||||
6 |
150005 |
2 |
#6-32 x 1/4” Phillips Round Head Machine Screw |
||||||||
7 |
--------- |
1 |
Microprocessor Coin Acceptor with Optical Switch |
||||||||
|
|
|
(refer to Microprocessor Coin Acceptors Listing on page 49) |
||||||||
8 |
137056 |
1* |
Optic Switch Only (Greenwald coin acceptors) |
||||||||
|
881143 |
1* |
Optic Switch Only (Hanke coin acceptors) |
||||||||
9 |
137023 |
1* |
Optic Switch Connector Only |
||||||||
10 |
137021 |
3* |
Microprocessor Socket Only |
||||||||
|
880772 |
1 |
Single Coin Optical Switch Harness |
||||||||
|
824080 |
1 |
Dual Coin Optical Switch Harness |
||||||||
|
122800 |
1 |
Microprocessor (female) Pin Extraction Tool |
||||||||
11 |
136048 |
1 |
1/8-Amp (Slo-Blo) Fuse |
*For dual coin models, double the quantity.
IMPORTANT: Check label on computer chip to verify correct part number for controller.
450302-5 |
Telephone: (508) 678-9000 / www.amdry.com |
5 |
Phase 5 Non-Coin Microprocessor Control Panel Assembly
Illus. No. |
Part No. |
Qty. |
Description |
1 |
112535 |
1 |
Non-Coin English Keyboard Label Assembly |
|
112276 |
1 |
Non-Coin Stick-On Labels (English Only)...Not Illustrated |
|
112275 |
1 |
3-Language Non-Coin Stick-On Labels...Not Illustrated |
|
|
|
(Spanish, Italian, and Hebrew) |
|
112277 |
1 |
3-Language Non-Coin Stick-On Labels...Not Illustrated |
|
|
|
(English, Spanish, and Hebrew) |
|
112278 |
1 |
5-Language Non-Coin Stick-On Labels...Not Illustrated |
|
|
|
(Italian, Dutch, French, German, and Chinese) |
2 |
801255 |
1 |
Phase 5 Microprocessor Control Panel Only |
|
801256 |
1 |
Phase 5 Microprocessor Control Panel Only with Battery Bracket |
|
801206 |
1 |
Phase 5 Non-Coin Non-Reversing Microprocessor Control Panel Assembly |
|
|
|
Complete |
|
|
|
(includes illus. nos. 1 through 7) |
|
801207 |
1 |
Phase 5 Non-Coin Reversing Microprocessor Control Panel Assembly |
|
|
|
Complete |
|
|
|
(includes illus. nos. 1 through 7) |
3 |
137222 |
1 |
Phase 5 Non-Coin Non-Reversing Controller Only |
|
137231 |
1 |
Phase 5 Non-Coin Reversing Controller Only |
|
824998 |
1 |
Phase 5 Battery Clip |
4 |
153010 |
2 |
#6 Star Washer |
5 |
150005 |
2 |
#6-32 x 3/4” Phillips Round Head Machine Screw |
6 |
150309 |
1 |
#10-16 x 1/2” Hex Head TEK Crimptite Screw |
7 |
136048 |
1 |
1/8-Amp (Slo-Blo) Fuse |
IMPORTANT: Check label on computer chip to verify correct part number for controller.
6 |
American Dryer Corporation |
450302-5 |
Phase 5 Coin and Non-Coin Microprocessor Control Box Assembly
|
|
|
|
|
|
|
|
|
|
|
|
Illus. No. |
Part No. |
Qty. |
Description |
||
1 |
141403 |
1 |
24 VAC Transformer |
||
|
|
|
|
For ALL Gas and Steam Models, and Electric Models of 380/416/480 Volt |
|
|
|
132070 |
1 |
24 VAC Transformer |
|
|
|
|
|
(for electric models of 208 volt/240 volt) |
|
2 |
150300 |
2 |
#10 x 1/2” Hex Washer TEK Screw |
||
3 |
120715 |
1 |
30-Position Terminal Block |
||
4 |
150002 |
2 |
#6-32 x 1” Phillips Round Head Machine Screw |
||
5 |
151000 |
2 |
#6-32 Pal Nut |
||
6 |
136057 |
* |
1/2-Amp (Slo-Blo) Fuse |
||
7 |
150301 |
* |
#8-18 x 7/16” Phillips Pan Head TEK Screw |
||
8 |
136008 |
* |
Fuse Block/Strip Only |
||
9 |
122641 |
1 |
15-Pin Microprocessor Connector |
||
10 |
122706 |
* |
Socket |
*As required.
450302-5 |
Telephone: (508) 678-9000 / www.amdry.com |
7 |
Dual Timer “Tap Touch” Controls
For Models Mfd. as of November 3, 2000
Illus. No. |
Part No. |
Qty. |
Description |
1 |
124030 |
1 |
15 Minute Timer - 24 VAC |
2 |
124025 |
1 |
60 Minute Timer - 24 VAC |
3 |
824175 |
1 |
Red Pilot Light - 24 VAC |
4 |
122301 |
1 |
“Tap Touch” Switch |
5 |
131932 |
3 |
Relay SPST 24v |
6 |
120730 |
1 |
30-Position Terminal Block |
7 |
151000 |
6 |
#6-32 Pal Nut |
8 |
882903 |
1 |
Dual Timer Panel Complete |
|
|
|
(includes illus. nos. 1 through 15) |
|
850392 |
- |
Dual Timer Panel Only |
9 |
153010 |
2 |
#6 Star Washer |
10 |
152000 |
3 |
#6-32 Hex Nut |
11 |
150207 |
2 |
#10-24 x 1/2” Phillips Pan Head Machine Screw |
12 |
150110 |
4 |
#8-32 x 1/4” Phillips Round Head Machine Screw |
13 |
112563 |
1 |
Dual Timer Panel Overlay |
14 |
124104 |
1 |
Pure Touch Knob with Red Pointer |
15 |
124105 |
1 |
Pure Touch Knob with Blue Pointer |
8 |
American Dryer Corporation |
450302-5 |
Dual Timer Control Panel Assembly
For Models Mfd. prior to November 3, 2000
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Illus. No. |
Part No. |
Qty. |
Description |
|
||
1 |
123005 |
1 |
Red Indicator Light - 24 VAC |
|
||
2 |
122400 |
1 |
Rocker Heat Selector Switch |
|
||
3 |
824015 |
1 |
Dual Timer Control Panel Assembly Complete - 24 VAC |
|
||
|
|
|
|
(includes illus. nos. 1 through 21) |
|
|
|
800051 |
1 |
Dual Timer Control Panel Only |
|
||
4 |
131917 |
1 |
Push-to-Start Relay - 24 VAC |
|
||
5 |
150207 |
2 |
#10-24 x 1/2” Round Head Machine Screw |
|
||
6 |
154001 |
2 |
#10-24 Speed Nut |
|
||
7 |
152000 |
2 |
#6-32 Hex Nut |
|
||
8 |
153010 |
2 |
#6 Star Washer |
|
||
9 |
120713 |
1 |
18-Position Terminal Block |
|
||
10 |
150002 |
2 |
#6-32 x 1” Round Head Machine Screw |
|
||
11 |
150110 |
4 |
#8-32 x 1/4” Phillips Machine Screw |
|
||
12 |
150001 |
2 |
#6-32 x 1/2” Round Head Machine Screw |
|
||
13 |
131931 |
1 |
Dual Timer Relay - 24 VAC |
|
||
14 |
151000 |
2 |
#6-32 Pal Nut |
|
||
15 |
112050 |
1 |
Dual Timer Label Only |
|
||
16 |
150309 |
1 |
#10-16 x 1/2” Hex Head TEK Crimptite Screw |
|
||
17 |
124103 |
2 |
Arrow Timer - 24 VAC |
|
||
18 |
124025 |
1 |
60 Minute Timer - 24 VAC |
|
||
19 |
124030 |
1 |
15 Minute Timer - 24 VAC |
|
||
20 |
122602 |
1 |
9-Pin Connector Only |
|
||
21 |
122700 |
8 |
Pin Terminal Only |
|
||
-- |
122801 |
1 |
Pin/Socket Extraction Tool |
|
450302-5 |
Telephone: (508) 678-9000 / www.amdry.com |
9 |
Dual Timer Control Box Assembly
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Illus. No. |
Part No. |
Qty. |
Description |
||
1 |
122603 |
1 |
9-Pin Socket Connector |
||
2 |
122701 |
9 |
Socket Terminal Only |
||
|
122801 |
1 |
Pin/Socket Extraction Tool |
||
3 |
315010 |
1 |
9-Pin Connector Bracket |
||
4 |
150300 |
2 |
#10 x 1/2” Hex Washer TEK Screw |
||
5 |
150300 |
2 |
#10 x 1/2” Hex Washer TEK Screw |
||
6 |
141403 |
1 |
24 VAC Transformer |
||
|
|
|
(for ALL gas and steam models, and electric models of 380/416/480 volt) |
||
|
132070 |
1 |
24 VAC Transformer |
||
|
|
|
(for electric models of 208 volt/240 volt) |
||
7 |
136008 |
* |
Fuse Block/Strip Only |
||
8** |
136057 |
* |
1/2-Amp (Slo-Blo) Fuse |
||
9 |
150301 |
* |
#8 x 7/16” Phillips Pan Head TEK Screw |
||
10 |
150002 |
2 |
#6-32 x 1” Phillips Round Head Machine Screw |
||
11 |
120715 |
1 |
30-Position Terminal Block |
||
12 |
151000 |
2 |
#6-32 Pal Nut |
*As required.
**Check fusing on dryer for verification.
10 |
American Dryer Corporation |
450302-5 |
Non-Microprocessor Coin Meter Control Panel Assembly
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Illus. No. |
Part No. |
Qty. |
Description |
|
||
1 |
|
123005 |
1 |
Red Indicator Light - 24 VAC |
|
|
2 |
|
122400 |
1 |
Rocker Heat Selector Switch |
|
|
3 |
|
824020 |
1 |
Coin Meter Control Panel Assembly Complete - 24 VAC |
|
|
|
|
|
|
(includes illus. nos. 1 through 6 and 8 through 12) |
|
|
|
|
800054 |
1 |
Coin Meter Control Panel Only |
|
|
4 |
|
131917 |
1 |
Push-to-Start Relay - 24 VAC |
|
|
5 |
|
150207 |
2 |
#10-24 x 1/2” Round Head Machine Screw |
|
|
6 |
|
154001 |
2 |
#10-24 Speed Nut |
|
|
7* |
|
125601 |
1 |
25¢ Coin Meter 24v (specify timing) |
|
|
8 |
|
150303 |
2 |
#4 x 3/4” Pan Head “A” Screw |
|
|
9 |
|
120712 |
1 |
12-Position Terminal Block |
|
|
10 |
|
150309 |
1 |
#10-16 x 1/2” Hex Head TEK Crimptite Screw |
|
|
11 |
|
122602 |
1 |
9-Pin Connector Only |
|
|
12 |
|
122700 |
9 |
Pin Terminal Only |
|
|
-- |
|
122801 |
1 |
Pin/Socket Extraction Tool |
|
*Consult factory for coin meters not listed.
450302-5 |
Telephone: (508) 678-9000 / www.amdry.com |
11 |
Non-Microprocessor Coin Meter Control Box Assembly
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Illus. No. |
Part No. |
Qty. |
Description |
|||
1 |
122603 |
1 |
9-Pin Socket Connector |
|||
2 |
122701 |
9 |
Socket Terminal Only |
|||
|
122801 |
1 |
Pin/Socket Extraction Tool |
|||
3 |
315010 |
1 |
9-Pin Connector Bracket |
|||
4 |
150300 |
2 |
#10 x 1/2” Hex Washer TEK Screw |
|||
5 |
150300 |
2 |
#10 x 1/2” Hex Washer TEK Screw |
|||
6 |
141403 |
1 |
24 VAC Transformer |
|||
|
|
|
|
(for ALL gas and steam models, and electric models of 380/416/480 volt) |
||
|
132070 |
1 |
24 VAC Transformer |
|||
|
|
|
|
(for electric models of 208/240 volt) |
||
7 |
136008 |
* |
Fuse Block/Strip Only |
|||
8** |
136057 |
* |
1/2-Amp (Slo-Blo) Fuse |
|||
9 |
150301 |
* |
#8 x 7/16” Phillips Pan Head TEK Screw |
|||
10 |
150002 |
2 |
#6-32 x 1” Phillips Round Head Machine Screw |
|||
11 |
120715 |
1 |
30-Position Terminal Block |
|||
12 |
151000 |
2 |
#6-32 Pal Nut |
*As required.
**Check fusing on dryer for verification.
12 |
American Dryer Corporation |
450302-5 |
Coin Meter Replacement Parts
Illus. No. Part No. Qty. Description
1 |
125541 |
1 |
1/60 RPM 24v / 60 Hz Meter Motor |
|
125540 |
1 |
1/30 RPM 24v / 50 Hz Meter Motor |
2 |
125500 |
1 |
2-Point Cam |
|
125501 |
1 |
3-Point Cam |
|
125502 |
1 |
4-Point Cam |
|
125503 |
1 |
5-Point Cam |
|
125504 |
1 |
6-Point Cam |
|
125506 |
1 |
8-Point Cam |
|
125507 |
1 |
9-Point Cam |
|
125508 |
1 |
10-Point Cam |
|
125510 |
1 |
12-Point Cam |
3 |
125515 |
1 |
Meter Switch “B” with Arm |
4 |
125516 |
2 |
Meter Switch “A” or “C” |
450302-5 |
Telephone: (508) 678-9000 / www.amdry.com |
13 |
Coin Vault Assembly
|
|
|
|
|
|
|
|
|
|
|
|
|
Illus. No. |
Part No. |
Qty. |
Description |
|
1 |
802112 |
1 |
Microprocessor Coin Vault Assembly Complete |
||
|
|
|
|
(includes illus. nos. 1 through 6) |
|
|
|
802117 |
1 |
Microprocessor Coin Vault Only |
|
|
|
802110 |
1 |
Non-Microprocessor Coin Vault Assembly Complete |
|
|
|
|
|
(includes illus. nos. 1 through 6) |
|
|
|
802115 |
1 |
Non-Microprocessor Coin Vault Only |
|
2 |
160006 |
1 |
Cam For 1/4 Turn Lock Only |
||
3 |
875061 |
1 |
1/4 Turn Lock with Key and Cam |
||
|
|
160105* |
1 |
1/4 Turn Mer-Pel Key Only |
|
4 |
802020 |
1 |
1/4 Turn Coin Box Assembly |
||
|
|
|
|
(includes illus. nos. 2 through 5) |
|
|
|
802019 |
1 |
1/4 Turn Coin Box Only without Face Plate |
|
|
|
125915 |
1 |
High Security (Greenwald) Coin Box Only with Key |
|
5 |
802018 |
1 |
1/4 Turn Coin Box Face Plate Assembly |
||
|
|
|
|
(includes illus. nos. 2 through 5) |
|
6 |
152014 |
4 |
1/4-20 Free Spin Wash Nut |
||
7 |
102502 |
1 |
Control Door Support Rod |
||
8 |
102601 |
1 |
Control Door Rod Retainer Clip |
||
9 |
102603 |
1 |
Control Door Rod Catch |
*Specify key number when ordering.
14 |
American Dryer Corporation |
450302-5 |
“Plastic” Main Door Assembly
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Illus. No. |
Part No. |
Qty. |
Description |
||
1 |
881421 |
1 |
Gray Plastic Main Door Assembly Complete with Mechanical Fasteners |
||
|
|
|
(includes illus. nos. 1 and 5 through 9) |
||
2 |
800448 |
4 |
12-1/2” Stainless Steel Main Door Hinge Assembly |
||
3 |
150410 |
4 |
#10-24 x 3/8” Phillips Pan Head Taptite Screw |
||
4 |
152014 |
1 |
1/4-20 Free Spin Wash Nut |
||
5 |
102349 |
1 |
Main Door Gasket |
||
6 |
102212 |
1 |
20-7/16” Door Glass with Four (4) Holes |
||
|
170730 |
1 |
Main Door Glass Adhesive (10.3 oz. cartridge) |
||
7 |
150448 |
4 |
1/2” Stainless Steel Flat Head Allen Screw |
||
8 |
170319 |
4 |
Door Glass (Nylon) Spacer |
||
9 |
150431 |
1 |
Main Door Latch Screw |
||
|
|
|
(#10 x 7/16” dome hex head) |
450302-5 |
Telephone: (508) 678-9000 / www.amdry.com |
15 |