American Dryer Corp ADG-531HS User Manual

Page 1
ADG-531HS
Hot Surface Ignition
Parts Manual
1998
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
T elephone: (508) 678-9000 / Fax: (508) 678-9447
www .amdry.com
ADC Part No. 450191
Page 2
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
W e have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________
RESELLER’S NAME _______________________________________________________________________________________
Serial Number(s) ________________________________________________________________________________________
________________________________________________________________________________________
ADG-531HS
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory , you can F AX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORT ANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.
Page 3
Table of Contents
Coin Panel Assembly .............................................................................................................................. 2
Microprocessor 2-Piece (Computer) Panel/Coin Chute Assembly ........................................................... 3
Front Panel Assembly ............................................................................................................................. 4
Main Door “Steel’ ’ Assembly .................................................................................................................. 5
Main Door Switch Assembly ................................................................................................................... 6
Lint Drawer/Basket Assembly................................................................................................................. 7
Coin Box /V ault Assembly (Left and Right) .............................................................................................. 8
Lint Drawer Switch Assembly ................................................................................................................. 9
Microprocessor T emperature Sensor Bracket Assembly ........................................................................ 10
Basket (Tumbler) and Support Assemblies ............................................................................................ 11
Basket (Tumbler) Bearing Mount Assembly ..................................................................................... 12, 13
Burner Train Assembly .................................................................................................................... 14, 15
Burner Hi-Limit/Hood Assembly ........................................................................................................... 16
Sail Switch Assembly............................................................................................................................ 17
Drive Motor Mount Assembly
For 60 Hz Models Only............................................................................................................ 18, 19
Fan (Impellor)/Idler Bearing Assemblies
For 60 Hz Models Only............................................................................................................ 20, 21
Drive and Idler Belts/Pulleys
For 60 Hz Models Only.................................................................................................................. 22
Exhaust Duct Assembly......................................................................................................................... 23
Rear Electrical Panel Assembly ....................................................................................................... 24, 25
Rear Guard Assemblies......................................................................................................................... 26
Additional Parts Available ..................................................................................................................... 27
Page 4
2
Coin Panel Assembly
Illus. No. Part No. Qty. Description
1 --------* 1 Mueller Microprocessor Coin Acceptor Assembly Less Optic Switch
and Switch Mounting Bracket
2 137056 1 Microprocessor Optic Switch
353269 1 Optic Switch Mounting Bracket...Not Illustrated 3 123005 1 Indicator Lamp - 24 VAC 4 881836 1 Coin Panel ONL Y 5 --------* 1 Lock ONLY 6 353270 1 Lock Cam ONLY 7 137098 1 Display Board 8 153010 2 #6 Star Washer 9 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw 10 120906 1 1/8” Wire Clip 11 --------* 4 Nut 12 --------* 4 Stud
* Indicates not available from ADC and must be purchased elsewhere.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 5
Micropr ocessor 2-Piece (Computer) Panel/Coin Chute Assembly
3
Illus. No. Part No. Qty. Description
1 137106 1 Computer Board Phase 5 2 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw 3 137104 1 Ribbon Cable Assembly (Display) 4 136048 1 1/8-amp (Slo-Blo) Fuse 5 853071 1 Optic Switch Harness 6 853171 1 Computer Panel
853170 1 Computer Panel Mounting Plate...Not Illustrated
7 881830 1 Left Coin Chute Assembly
881484 1 Right Coin Chute Assembly
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 6
4
Front Panel Assembly
Illus. No. Part No. Qty. Description
1 881833 1 Almond Right-Hand Front Panel Assembly
(includes illus. nos. 1, 7, and 8)
881834 1 Blue Right-Hand Front Panel Assembly
(includes illus. nos. 1, 7, and 8)
881835 1 Red Right-Hand Front Panel Assembly
(includes illus. nos. 1, 7, and 8)
881933 1 White Right-Hand Front Panel Assembly
(includes illus. nos. 1, 7, and 8)
2 --------- 1 Top Hinge Block Assembly
(refer to Main Door “Steel” Assembly on page 5)
3 --------- 1 Bottom Hinge Block Assembly
(refer to Main Door “Steel” Assembly on page 5)
4 114054 1 Arrow Label 5 150309 24 #10-16 x 1/2” Phillips Hex Head TEK Crimptite Screw 6 114054 1 Arrow Label 7 154215 4 5/32” Pop Rivet 8 170330 2 Friction Door Catch
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 7
Main Door “Steel” Assembly
5
Illus. No. Part No. Qty. Description
1 881832 1 Black Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 10)
2 102349 1 Door Extruded Gasket
170730 1 Clear Gasket Adhesive (10.3 oz. cartridge)
3 88 115 2 1 Black T op Hinge Block Assembly
(includes illus. nos. 3 and 4) 4 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew 5 153031 1 1/4” Nylon Washer 6 88 1 1 5 1 1 Black Bottom Hinge Block Assembly
(includes illus. nos. 5 through 7) 7 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew 8 151010 1 #10-32 Black Hex Acorn Nut 9 150120 1 Door Latch Screw 10 102211 1 20-7/16” Door Glass
170730 1 Clear Glass Adhesive (10.3 oz. cartridge)
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 8
6
Main Door Switch Assembly
Illus. No. Part No. Qty. Description
1 153566 2 #6-32 x 7/8” Clinch Stud 2 152013 2 #6-32 Hex Nut 3 153010 2 #6 Star Washer 4 137005 1 Door Switch 5 122636 2 Flag Terminal 6 881211 1 Black Main Door Switch Housing ONLY
88 115 3 1 Black Main Door Switch Housing Complete
(includes illus. nos. 1 through 4 and 6)
7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 9
Lint Drawer/Basket Assembly
7
Illus. No. Part No. Qty. Description
1 881831 1 Black Lint Drawer Assembly Less Lock and Hardware
(includes illus. nos. 1 and 5) 2 160015 1 Lock 3 160031 1 Lock Cam ONLY 4 160104 1 Lock Key 5 117604 4 Noise Suppression Tape (sold by the foot) 6 -------- 1 Lint Drawer Switch
(refer to Lint Drawer Switch Assembly on page 9)
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 10
8
Coin Box/Vault Assembly (Left and Right)
Illus. No. Part No. Qty. Description
1 881174 1 Black Left/Right Coin Box Faceplate ONLY
881476 1 Left Coin Box with Black Faceplate ONLY (less lock) 2 881474 1 Coin Box Lock Kit (includes two [2] locks with keys “keyed alike”) 3* 160136 1 Coin Box Lock Keys ONLY 4 881477 1 Black Left Coin Vault ONLY 5 881174 1 Black Left/Right Coin Box Faceplate ONLY
881167 1 Right Coin Box with Black Faceplate ONLY (less lock) 6 88 1 1 7 9 1 Black Right Coin V ault ONLY
* Specify key number when ordering.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 11
Lint Drawer Switch Assembly
9
Illus. No. Part No. Qty. Description
1 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw 2 853241 1 Lint Drawer Switch Panel 3 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw 4 353261 1 Lint Drawer Bracket
881494 1 Lint Drawer Switch Box Assembly
(includes illus. nos. 1, 2, and 4 through 9) 5 122116 1 Lint Drawer Switch 6 122636 2 0.250 Insulated Flag T erminal 7 122701 4 M-N-L (Mate-N-Lock) Socket Terminal 8 122605 2 4-Pin Connector (female) 9 881502 1 Lint Drawer Switch IV Harness
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 12
10
Micr oprocessor T emperatur e Sensor Bracket Assembly
Illus. No. Part No. Qty. Description
1 853021 1 Sensor Bracket ONLY
881089 1 Microprocessor Temperature Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 6 and 9 through 12)
2 880251 1 Microprocessor Sensor Probe Assembly Complete
(includes illus. nos. 2 through 6) 3 154007 2 1/4” Push On Fastener 4 121028 2 1/4” Terminal 5 122701 4 Socket Terminal 6 122605 1 4-Pin Connector (female) 7 122700 4 Pin Terminal 8 122604 1 4-Pin Connector (male) 9 130112 1 225° Thermostat 10 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw 11 153010 2 #6 Star Washer 12 152013 2 #6-32 Hex Nut 13 152014 2 1/4-20 Free Spin Wash Nut
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 13
Basket (T umbler) and Support Assemblies
11
Illus. No. Part No. Qty. Description
1 881838 1 Stainless Steel Basket (tumbler) and Support Assembly Complete with Felt
Collar (includes illus. nos. 1 through 11)
881839 1 Stainless Steel Basket (tumbler) ONLY with Felt Collar
2 301433 2 Stainless Steel Short Basket (tumbler) Rib ONLY
301434 1 Stainless Steel Tall Basket (tumbler) Rib ONLY 3 150518 1 5/16-18 x 3/8” Socket Button Head Screw 4 882050 3 5/16-18 x 31” Tie Rod 5 153001 3 5/16” Flat Washer 6 154210 30 5/32” x 3/16” Pop Rivet 7 800741 1 Basket (tumbler) Support ONLY 8 152004 3 5/16-18 Hex Nut 9 153002 3 5/16” Lock Washer 10 153001 3 5/16” Flat Washer 1 1 116003 1 Felt Collar ONLY
401010 1 #847 Adhesive for Felt Collar (5 oz. tube)...Not Illustrated
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 14
12
Basket (T umbler) Bearing Mount Assembly
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 15
Basket (T umbler) Bearing Mount Assembly
Illus. No. Part No. Qty. Description
1 880203 1 1-3/8” Flange Bearing
880938 1 Cone Point Setscrew Kit...Not Illustrated 2 153005 4 3/8” Lock Washer 3 152005 4 3/8-16 Hex Nut 4 153004 2 3/8” Flat Washer 5 153005 2 3/8” Lock Washer 6 152005 2 3/8-16 Hex Nut 7 880779 1 1-3/8” Pillow Block Bearing with Rotational Sensor Magnet
880938 1 Cone Point Setscrew Kit...Not Illustrated 8 824807 1 Rotational Sensor Magnetic Switch Assembly 9 853040 1 Basket (tumbler) Bearing Support ONL Y 10 152004 2 5/16-18 Hex Nut 11 150621 2 5/16-18 x 1-1/2” Hex Head Machine Bolt 12 150600 2 3/8-16 x 1-1/2” Hex Head Machine Bolt 13 150501 2 5/16-18 x 3/4” Hex Head Machine Bolt 14 153002 2 5/16” Lock Washer 15 153001 2 5/16” Flat Washer 16 150610 2 5/16-18 x 1-1/2” Allen Setscrew 17 152004 2 5/16-18 Hex Nut 18 153001 2 5/16” Flat Washer 19 153002 2 5/16” Lock Washer 20 150501 2 5/16-18 x 3/4” Hex Head Machine Bolt
13
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 16
14
Burner T rain Assembly
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 17
Burner T rain Assembly
Illus. No. Part No. Qty. Description
1* 881470 1 ADG-531HS Liquid Propane (L.P.) Gas Burner Assembly Complete Less
Orifice (includes illus. nos. 1 through 12 and 14 through 20)
881469 1 ADG-531HS Natural Gas Burner Assembly Complete Less Orifice
(includes illus. nos. 1 through 12 and 14 through 20) 2 142502 1 1/2” x 3/4” Street Elbow 3 881372 1 1/2” F.P.T. Straight Shutof f with Tailpiece 4 880960 1 1/2” 24 VAC Liquid Propane (L.P. gas) Gas Valve
128927 1 1/2” 24 VAC Redundant (natural gas) Gas Valve 5 318713 1 Notched Pipe Bracket 6 141211 1 1/2” Single Port Manifold 7 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 8 353222 1 Hot Surface Ignition (HSI) Manifold Pipe Bracket 9 318009 1 Burner Tube Bracket 10 151001 6 #8-32 Pal Nut 11 141131 1 Upshot Burner Tube and Spreader 12 353099 1 Burner Tube Angle Bracket 13 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw 14 -------- 1 Burner Spreader - Not Available 15 150002 1 #6-32 x 1” Phillips Round Head Machine Screw 16 881479 1 Hot Surface Ignitor - 24 VAC 17 151000 1 #6-32 Pal Nut 18 128918 1 Flame Probe 19 150315 1 #6 x 3/8” Phillips Pan Head Screw 20 881500 1 Hot Surface Ignition (HSI) Module II 21** 140855 1 #33 Burner Orifice (liquid propane [L.P.] gas) ONLY
140836 1 #10 Burner Orifice (natural gas) ONLY
881795** 1 ADG-531HS Liquid Propane (L.P.) to Natural Gas Conversion Kit
(includes parts to convert both top and bottom baskets [tumblers])
881794** 1 ADG-531HS Natural Gas to Liquid Propane (L.P.) Conversion Kit
(includes parts to convert both top and bottom baskets [tumblers])
15
* Burner orifice is not included and must be ordered separately. ** Consult the factory for elevations over 2,000 feet.
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 18
16
Burner Hi-Limit/Hood Assembly
Illus. No. Part No. Qty. Description
1 881223 1 Hot Surface Ignition (HSI) Burner Hood 2 130401 1 330º Hi-Limit 3 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 4 150300 4 #10-16 x 1/2” Hex Washer TEK Screw
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 19
Sail Switch Assembly
17
Illus. No. Part No. Qty. Description
1 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw 2 802800 1 Sail Switch Box with Cover and Bracket ONLY
(includes illus. nos. 4 and 8)
802801 1 Sail Switch Box Assembly Complete
(includes illus. nos. 2 through 10) 3 154004 1 Twin Speed Nut 4 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw 5 319203 1 Sail Switch Box Cover and Bracket ONLY 6 122200 1 Sail Switch ONL Y 7 150303 2 # 4 x 3/4” Phillips Pan Head “A” Machine Screw 8 105500 1 Sail Switch Actuator Rod 9 319202 1 Sail Switch Damper Flat 10 154002 1 1/8” Push On Fastener 11 853105 1 Burner Box ONLY
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 20
18
Drive Motor Mount Assembly
For 60 Hz Models ONL Y
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 21
Drive Motor Mount Assembly
For 60 Hz Models ONL Y
Illus. No. Part No. Qty. Description
1 100718 1 3/16” x 3/16” x 2-1/4” Key 2 101133 1 2-1/4” OD x 5/8” ID Sheave 3 100171 1 4L-440 V-Belt 4 101207 1 3.0 OD x 5/8” ID Pulley 5 100156 1 5L-330 V-Belt 6 181022 1 3/4 hp 100/200v 1ø 50/60 Hz Motor 7 152004 4 5/16-18 Hex Nut 8 153002 4 5/16” Lock Washer 9 153001 4 5/16” Flat Washer 10 853087 1 Motor Mount Slide Assembly ONLY 11 152005 1 3/8-16 Hex Nut 12 150601 1 3/8-16 x 2” Hex Head Tap Bolt 13 853042 1 Motor Base Assembly ONLY 14 152004 4 5/16-18 Hex Nut 15 153002 4 5/16” Lock Washer 16 153001 4 5/16” Flat Washer 17 153001 4 5/16” Flat Washer 18 153002 4 5/16” Lock Washer 19 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
881841 1 100/200v 1ø 60 Hz Drive Motor Mount Assembly Complete...Not
Illustrated
(includes illus. nos. 1, 2, 4, and 6 through 16)
881840 1 200v 3ø 60 Hz Drive Motor Mount Assembly Complete...Not Illustrated
(includes illus. nos. 1, 2, 4, and 6 through 16)
19
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 22
20
Fan (Impellor)/Idler Bearing Assemblies
For 60 Hz Models ONL Y
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 23
Fan (Impellor)/Idler Bearing Assemblies
For 60 Hz Models ONL Y
Illus. No. Part No. Qty. Description
1 100701 1 3 /16” x 3/16” x 1” K ey 2 101206 1 2.8 OD x 5/8” ID Pulley 3 152002 4 1/4-20 Hex Nut 4 153007 4 1/4” Lock Washer 5 154324 4 #10-32 x 1/4” Cone Point Setscrew 6 881361 2 5/8” Flange Bearing 7 881225 1 (Fan) Impellor Bearing Mount ONL Y 8 10 1 12 9 1 9” Pulley 9 154301 2 5/16-18 x 1” Allen (cone point) Setscrew 10 100705 1 3/16” x 3/16” x 1-3/8” Key 11 301850 1 Idler Shaft 12 150529 3 1/4-20 x 2-1/4” Carriage Bolt 13 --------- 4 Flanges (part of Part No. 100214 bearing) 14 880214 2 5/8” Flange Bearing 15 150617 2 3/8-16 x 1” Hex Head Machine Bolt 16 153005 2 3/8” Lock Washer 17 153004 2 3/8” Flat Washer 18 152020 1 5/16-18 Square Nut 19 152004 1 5/16-18 Hex Nut 20 150509 1 5/16-18 x 3” Hex Head Machine Bolt 21 882776 1 Steel Idler Assembly Complete
(includes illus. nos. 10 through 23) 22 153007 3 1/4” Lock Washer 23 152002 3 1/4-20 Hex Nut 24 881226 1 Fan Mount ONLY
(includes illus. no. 33) 25 153004 4 3/8” Flat Washer 26 153005 4 3/8” Lock Washer 27 150508 4 3/8-16 x 3/4” Hex Head Machine Bolt 28 153050 3 or 4 1/2” x 1-1/16” Flat Washer 29 100604 1 12.5 Fan (impellor) 30 100723 1 1/8” x 1/8” x 1-3/8” Key 31 152006 2 1/2-20 Left-Hand Jam Nut 32 353111 1 Fan Shaft 33 117604 3 Noise Suppression Tape (sold by the foot) 34 116011 1 3-1/2” x 4” Felt Bearing Seal
21
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 24
22
Drive and Idler Belts/Pulleys
For 60 Hz Models ONL Y
Illus. No. Part No. Qty. Description
1 --------- 1 Basket (tumbler) Support
(refer to Basket [Tumbler] and Support Assemblies on page 11)
2 10 1100 1 18” Pulley Basket (tumbler)
154301 2 5/16-18 x 1” Allen (cone point) Setscrew 3 100713 1 1/4” x 1/4” x 7/8” Key 4 100106 1 5L-690 V-Belt 5 101206 1 2.8 OD x 5/8” ID Pulley 6 10 1 1 2 9 1 9” x 2-1/2” Compound Pulley 7 --------- 1 Idler/Shaft Assembly
(refer to Fan [Impellor]/Idler Bearing Assemblies on page 20 and page
21)
8 100171 1 4L-440 V-Belt 9 154301 2 5/16-18 x 1” Allen (cone point) Setscrew 10 101133 1 2-1/4” OD x 5/8” ID Pulley 1 1 100156 1 5L-330 V-Belt 12 101207 1 3.0 OD x 5/8” ID Pulley 13 --------- 1 Motor Mount Assembly
(refer to Drive Motor Mount Assembly on page 18 and page 19)
14 100718 1 3/16” x 3/16” x 2-1/4” Key
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 25
Exhaust Duct Assembly
23
Illus. No. Part No. Qty. Description
1 143536 1 6” x 45º Elbow 2 143536 2 6” x 45º Elbow
117505 6 Duct Tape (sold by the foot)...Not Illustrated 881373 1 6” x 45º Elbow with 6” Damper...Not Illustrated
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 26
24
Rear Electrical Panel Assembly
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 27
Rear Electrical Panel Assembly
Illus. No. Part No. Qty. Description
1 881792 1 Hot Surface Ignition (HSI) 24 VAC Transformer Kit (for 100 VAC Only)
881673 1 Hot Surface Ignition (HSI) 24 VAC Transformer Kit (for 200 VAC Only) 2 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw 3 152014 2 1/4-20 Free Spin Wash Nut 4 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw 5 136008 1 or 2 Fuse Block 6 136049 1 3/4-amp (Slo-Blo) Fuse - 100 VAC ONLY
136057 2 1/2-amp (Slo-Blo) Fuse - 200 VAC ONLY 7 150301 1 or 2 #8-18 x 7/16” Phillips Pan Head TEK Screw 8 132445 1 1 ø 200 Volt Motor Contactor - 24 VAC
132447 1 1ø 200 Volt and 3ø 200 Volt Motor Contactor - 24 VAC 9 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw 10 112025 1 Caution/Fuse Label 11 353161 1 Connector Bracket 12 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw 13 122642 1 9-Pin Connector 14 122643 8 M-N-L (Mate-N-Lok) Pin 15 122645 1 6-Pin Connector 16 122643 6 M-N-L (Mate-N-Lok) Pin 17 122649 1 4-Pin Connector 18 122643 4 M-N-L (Mate-N-Lok) Pin 19 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw 20 353153 1 Rear Electrical Box Cover 21 112046 1 Ground Label 22 112014 1 High V oltage Label 23 112039 1 “BLACK/WHITE/GREEN/GROUND” Label 24* 150008 2 #6-32 x 1-1/4” Phillips Round Head Machine Screw 25* 120701 1 4-Position T erminal Block 26* 881222 1 Power Distribution Block Mounting Bracket 27* 151000 2 #6-32 Pal Nut 28* 153528 2 #8-32 x 1/2” Clinch Stud 29* 121300 2 Bushing 30* 152001 2 #8-32 Hex Nut 31 121010 1 L-70 Ground Lug 32 153007 1 1/4” Lock Washer 33 152002 1 1/4-20 Hex Nut 34 824828 1 R.C. Network
25
* For top basket (tumbler) ONLY.
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 28
26
Rear Guard Assemblies
Illus. No. Part No. Qty. Description
1 353147 2 Upper and Lower Back Guard 2 150301 14 #8-18 x 7/16” Phillips Pan Head TEK Screw 3 114001 1 “CAUTION - EXHAUSTED” Label 4 112086 1 “INSTALLATION INSTRUCTION” Label 5 103500 4 Leveling Leg
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 29
Additional Parts Available
Part No. Description
117505 Aluminum Duct Tape (sold by the foot) 120903 Closed End Connector (crimp-on wire nut) 121026 Tab Receptacle Combination 121499 4” Wire Tie 121500 8” Wire Tie 122804 Manometer (used to measure gas pressure) 170730 Main Door Glass/Gasket Adhesive (10.3 oz. cartridge) 401010 #847 Adhesive (5 oz. tube) for Adhering Felt to Basket (tumbler) Assembly 404506 Beige Brush-In-Cap Bottle Touch-Up Paint 404507 Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint 410001 1/2” Allen Wrench (used to remove gas valve brass tailpiece) 881299 Loctite Kit (includes two [2] 0.02 oz. tubes of #290 wicking loctite)
27
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 30
ADC 450191 3 - 08/22/05 -0
Loading...