American Dryer Corp WDA-530DSi II, ADG-530DSi II User Manual

ADG-530DSi II/WDA-530DSi II

Direct Spark Ignition

Parts Manual

1999 thru 2000

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

Telephone: [phone] / Fax: [phone]

E-mail: [e-mail]

121099WM/tcosta ADC Part No. 450427

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is

properly maintained, it will provide many years of safe, efficient, and trouble-free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.

The following “FOR YOUR SAFETY ” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________

RESELLER’S NAME _______________________________________________________________________________________

Serial Number(s) ________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory,
you can FAX your order to ADC at [phone] or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that
your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.

Quick Reference Diagram

For Detailed Information See the Table of Contents on Next Page.

Table of Contents

Front Panel Assembly ............................................................................................................................. 3

Left Coin Panel Assembly ....................................................................................................................... 4

Right Coin Panel Assembly ..................................................................................................................... 5

2-Piece Microprocessor (Computer) Panel/Coin Chute Assemblies ......................................................... 6

Coin Box/Coin Vault Assemblies (Left and Right) .................................................................................... 7

Main Door “Steel’’ Assembly .............................................................................................................. 8, 9

Main Door Switch Assembly................................................................................................................. 10

Basket (Tumbler)/Support Assemblies ....................................................................................................11

Lint Drawer/Basket Assembly ............................................................................................................... 12

Lint Drawer Switch Box Assembly ........................................................................................................ 13

Microprocessor Temperature Sensor Bracket Assembly ........................................................................ 14

Basket (Tumbler) Bearing Mount Assembly ........................................................................................... 15

Rear Electrical Panel Assembly ....................................................................................................... 16, 17

Drive Motor/Motor Mount Assemblies

For 60 Hz Models ............................................................................................................................ 18

Drive/Idler Belts and Pulleys

For 60 Hz Models ............................................................................................................................ 19

Impellor (Fan)/Idler Bearing Assemblies

For 60 Hz Models ...................................................................................................................... 20, 21

Burner Train Assembly without Shut Off Valve

For Models Mfd. as of February 29, 2000.................................................................................. 22, 23

Burner Train Assembly

For Models Mfd. prior to February 29, 2000.............................................................................. 24, 25

Burner Hi-Limit/Hood Assemblies ......................................................................................................... 26

Sail Switch Assembly ............................................................................................................................ 27

Rear Back Guard Assemblies................................................................................................................ 28

Exhaust Duct Assembly......................................................................................................................... 29

Additional Parts Available ..................................................................................................................... 30

Telephone: [phone]

Fax: [phone]

Front Panel Assembly

3

Illus. No. Part No. Qty. Description

1 881471* 1 Right Hand Textured Front Panel Assembly

2 --------- 1 Top Hinge Block Assembly

3 --------- 1 Bottom Hinge Block Assembly

4 112227 1 Top Arrow Label (Red)
5 150309 24 #10-16 x 1/2” Hex Head TEK Crimptite Screw
6 112226 1 Bottom Arrow Label (Blue)
7 154215 4 5/32” Pop Rivet
8 170330 2 Friction Door Catch

* Specify color when ordering.

(includes illus. nos. 1, 7, and 8)

881472 1 Right Hand Stainless Steel Front Panel Assembly

(includes illus. nos. 1, 7, and 8)

881473* 1 Right Hand Front Panel Assembly

(includes illus. nos. 1, 7, and 8)

(refer to Main Door “Steel” Assembly on page 8 and page 9)

(refer to Main Door “Steel” Assembly on page 8 and page 9)

4

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Left Coin Panel Assembly

Illus. No. Part No. Qty. Description

1 881163 1 25¢ U.S. Hanke Coin Acceptor Assembly with Optic Switch

881450 1 25¢ Canadian Hanke Coin Acceptor with Optic Switch

881451 1 .880 Token Hanke Coin Acceptor with Optic Switch
2 881143 1 Hanke Optic Switch with Connector
3 112564 1 Left Keypad (Blue)
4 881160 1 Coin Panel ONLY

881161 1 Left Coin Panel with Label

(includes illus. nos. 3, 4, 8, and 9)

5 160029 1 Lock (keyed NO530) ONLY with Key

160129 1 NO530 Key ONLY
6 160028 1 Lock Cam ONLY
7 137098 1 Display Board

137104 1 Display Board Ribbon Cable Assembly...Not Illustrated
8 153010 2 #6 Star Washer
9 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw

10 120906 1 1/8” Wire Clip
11 152102 4 M3 Metric Hex Nut

Telephone: [phone]

Fax: [phone]

Right Coin Panel Assembly

5

Illus. No. Part No. Qty. Description

1 881163 1 25¢ U.S. Hanke Coin Acceptor Assembly with Optic Switch

2 881143 1 Hanke Optic Switch with Connector
3 112565 1 Right Keypad (Red)
4 881160 1 Coin Panel ONLY

5 160029 1 Lock (keyed NO530) ONLY with Key

6 160028 1 Lock Cam ONLY
7 137098 1 Display Board

8 153010 2 #6 Star Washer
9 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw

10 120906 1 1/8” Wire Clip

11 152102 4 M3 Metric Hex Nut

881450 1 25¢ Canadian Hanke Coin Acceptor with Optic Switch
881451 1 .880 Token Hanke Coin Acceptor with Optic Switch

881162 1 Right Coin Panel with Label

(includes illus. nos. 3, 4, 8, and 9)

160129 1 NO530 Key ONLY

137104 1 Display Board Ribbon Cable Assembly...Not Illustrated

6

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

2-Piece Microprocessor (Computer) Panel/Coin Chute Assemblies

Illus. No. Part No. Qty. Description

1 137103 1 Phase 5 Microprocessor Controller (Computer)
2 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
3 137104 1 Ribbon Cable Assembly
4 136048 1 1/8-Amp (Slo Blo) Fuse ONLY
5 853071 1 or 2 Optic Switch Harness
6 853171 1 Microprocessor Controller (Computer) Panel

853170 1 Microprocessor Controller (Computer) Panel Mounting Plate

...Not Illustrated

7 881484 1 2-Piece Coin Chute Assembly

Telephone: [phone]

Fax: [phone]

Coin Box/Coin Vault Assemblies (Left and Right)

7

Illus. No. Part No. Qty. Description

1 881174 1 Black Left/Right Coin Box Faceplate Only

2 881474 1 Coin Box Lock kit (includes 2 Locks with Keys “Keyed Alike”)

3* 160136 1 Coin Box Lock Key ONLY

4 881477 1 Black Left Coin Vault ONLY
5 881174 1 Black Left/Right Coin Box Faceplate ONLY

6 881179 1 Black Right Coin Vault ONLY

* Specify key number when ordering.

881476 1 Left Coin Box with Black Faceplate Only (Less Lock)

881167 1 Right Coin Box with Black Faceplate ONLY (Less Lock)

8

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Main Door “Steel’’ Assembly