American DJ®
LOS ANGELES, CA. 90058
Model:
Warp!™
SPECIFICATIONS:
Lamp: ZB-ELC 24V 250W
Power: 110V/60Hz
Fuse: 5A
Optics: High Quality Glass Lenses
Ventilation: Fan Cooled
Working Position: Any
Weight: 21 lbs.
Size: 11” x 12.25” x 5.75”
Duty Cycle: 10 min. on 10 min. off
HALOGEN LAMP WARNING!
This fixture is fitted with halogen lamps
which are highly susceptible to damage if
improperly handled. Never touch lamp
with bare fingers as the oil from your
hands will shorten lamp life. Also, never
move fixture until lamp has had ample
time to cool. Remember, lamps are not
covered under warranty conditions.
Thank you for purchasing this
American DJ® product. For your
convenience this lighting effect has
been lamped and is ready to be used,
there is no assembly required.
Please read the following
instructions before installing or
using your new unit.
Operating Instructions:
Unit is ready to be hung or set on the ground.
After plugging in unit, the lights will react to the
music via the sound active internal microphone.
Adjust the sound activation knob on the back of
the unit for desired music sensitivity.
A Super moonflower effect, The Warp! is sound
active with multi-colored dichroic colors and 7 hot
gobo patterns. Fan cooled. Hanging bracket for
easy installation. A great effect for mobile DJ’s,
roller rinks, and night clubs.
To replace lamp; unscrew knob on lamp
replacement hatch on the top casing of the
fixture. Replace bulbs; reassemble.
For service, contact your American DJ™ dealer.
Caution! Always disconnect from main
power before replacing lamps or servicing unit.
Remember to always replace with same lamps
and fuses.
American DJ
®
UUsseerr
Instructions
Warp!
™