American DJ Vertigo User Instructions

American DJ

®

VERTIGO™

CAUTION!

Read instructions before installing or

plugging unit in.

SPECIFICATIONS: MODEL - Vertigo™

User Instructions

HALOGEN LAMP WARNING!

Weight: 19 lbs.
Size:
Lamp: 2 x ZB-64514 120V 300W
Fuse:
Supply Voltage:
Working Position:
Duty Cycle: 10 Minutes
Colors: Multiple Colored

14” x 12” x 12”W

10A

120V

Any Safe position

This fixture is fitted with halogen
lamps which are highly susceptible
to damage if improperly handled.
Never touch lamp with bare fin
gers as the oil from your hands will
shorten lamp life. Also, never move
fixture until lamp has had ample
time to cool. Remember, lamps
are not covered under warranty
conditions.

-

OPERATING INSTRUCTIONS:

Unit is ready to be hung or set on flat surface. Unit will react to bass sound of music via the internal
microphone. Be sure not to obstruct cooling vents and keep in a well ventilated area. Fog will give
the best results, fog or special effects smoke must be used in order to see the beams of light.

CAUTION: Front part of fixture will get extremely hot if operated for long periods. Please use a 5 min
on/5 min off duty cycle for best results. Let cool before handling unit.Caution! Never open unit when
in use. Always disconnect main power before serving or replacing lamp. Remember always replace
same lamp and fuses.

Lamp replacement: Remove top cover of unit. Remove and replace lamps with the same wattage
and voltage. For service contact American DJ. Toll Free: [phone]
Fax: [phone]
To purchase parts online visit http://parts.americandj.com

Affordable Quality Lighting Products from American DJ® Los Angeles, CA. 90058