
UV Canon™ Introduction
Thank you for purchasing the UV Canon™ by Ameri-
The UV Canon™ is ready to be plugged in right out of the
Canon™ has been designed to function as a ultra-violet light projector.
The reflector focuses a tight ultra-violet beam of light on wall or other
surface. This unit was designed to fit the needs of theatrical groups
and other arenas that require strong ultra-violet lighting focused on a
specific location, rather than using other types of ultra-violet lighting
that washes an entire area.
provides a toll free customer
support line, to provide set up help and to answer any question should
you encounter problems during your set up or initial operation. You
Service Hours are Monday through Friday 9:00 a.m. to 5:00
carton appears to be damaged, carefully inspect your unit for damage
and be sure all accessories necessary to operate the unit have arrived
contact our toll free customer support number for further instructions.
customer support at the number listed below.
To prevent or reduce the risk of electrical shock or fire, do
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact your nearest American DJ
PLEASE do not discard the shipping carton in the trash. Please
recycle when ever possible.
- www.americandj.com - UV Canon™ Instruction Manual Page 2

- www.americandj.com - UV Canon™ Instruction Manual Page 4
- www.americandj.com - UV Canon™ Instruction Manual Page 3
UV Canon™ Features
The UV Canon™ carries a one year (365 days) limited warranty.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) num-
the shipping carton. If the unit is under warranty, you must provide a
copy of your proof of purchase invoice. You may obtain a R.A. num-
er support number. All packages returned to the service department
voltage in your area matches the required voltage for your American
UV Canon™ before attempting operation.
This fixture is designed to operate as a stand
alone unit. It has been tested and the lamp has been installed at the
factory there is no assembly necessary. The UV Canon™ is ready to
ging the unit in the lamp will immediately begin to glow.
thoroughly before attempting to operate this unit. These instructions
contain important safety information regarding the use and mainte-
Due to fog residue, smoke, and dust cleaning the
cleaning will ensure longevity, and crisp beam output.
2. Use a soft brush to clean out the air vents
3. Clean the external optics with glass cleaner and a soft cloth every
4. Clean the internal optics with glass cleaner and a soft cloth every
5. Always be sure to dry all parts completely before plugging the unit
other liquids into or on to your unit. To prevent re or shock hazard,
do not expose this product to rain or moisture.
This unit is designed for interior use only. Do not use this unit out
doors. Use of product outdoors will void the warranty.
electrical cord. This prong is used to reduce the risk of electrical
shock and re in the rare case of an internal short.
UV Canon™ General Instructions
UV Canon™ Warranty Registration
UV Canon™ Precautions
UV Canon™ Operation
UV Canon™ Cleaning

UV Canon™ Lamp and Fuse Replacement
- www.americandj.com - UV Canon™ Instruction Manual Page 6
- www.americandj.com - UV Canon™ Instruction Manual Page 5
ONE YEAR LIMITED WARRANTY
hereby warrants, to the original purchaser, American DJ
free of manufacturing defects in material and workmanship for a period of one year (365
days) from the date of purchase. This warranty shall be valid only if the product is pur-
chased within the United States of America, including possessions and territories. It is the
owner’s responsibility to establish the date and place of purchase by acceptable evidence,
at the time service is sought.
charges must be pre-paid. If the requested repairs or service (including parts replacement)
are within the terms of this warranty, American DJ
will pay return shipping charges only
to a designated point within the United States. If the entire instrument is sent, it must be
shipped in its original package. No accessories should be shipped with the product. If any
accessories are shipped with the product, American DJ
shall have no liability whatsoever
for loss of or damage to any such accessories, nor for the safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is
modi ed in any manner which American DJ
concludes, after inspection, affects the reli-
ability of the product; if the product has been repaired or serviced by anyone other than
factory unless prior written authorization was issued to purchaser by
or periodic check-up. During the period speci ed above, American DJ
tive parts at its expense, and will absorb all expenses for warranty service and repair labor
by reason of defects in material or workmanship. The sole responsibility of American DJ
under this warranty shall be limited to the repair of the product, or replacement thereof,
including parts, at the sole discretion of American DJ
ranty were manufactured after January 1, 1990, and bear identifying marks to that effect.
reserves the right to make changes in design and/or improvements upon
its products without any obligation to include these changes in any products theretofore
sory supplied with products described above. Except to the extent prohibited by applicable
law, all implied warranties made by American DJ
in connection with this product, includ-
ing warranties of merchantability or tness, are limited in duration to the warranty period
set forth above. And no warranties, whether expressed or implied, including warranties of
merchantability or tness, shall apply to this product after said period has expired. The
consumer’s and or Dealer’s sole remedy shall be such repair or replacement as is expressly
provided above; and under no circumstances shall American DJ
be liable for any loss or
damage, direct or consequential, arising out of the use of, or inability to use, this product.
G. This warranty is the only written warranty applicable to American DJ
supersedes all prior warranties and written descriptions of warranty terms and conditions
Always replace with the exact same type lamp and fuse,
cian. Replace with anything other than the specified part can damage
your unit and will void your manufactures warranty.
one has already been replaced, STOP using the unit. Contact cus-
tomer support for further instructions, you may have to return the unit
for servicing. Continuing to use the unit may cause serious damage.
The fuse is located on the rear of the unit next
to the power cord. Occasionally this fuse may blow when the unit
same type. Insert the new fuse into it’s holder and return the holder to
Caution! Never open the unit when in use.
Always disconnect the main power and allow the fixture ample time
to cool before attempting to replace the lamp. Lamp replacement has
a single thumb screws. Again, please remember to always replace
with the exact same type lamp.
tion grill to the unit chassis. Remove these screws with a #2 Phillips
screwdriver to access the lamp socket.
Once the screws have been removed, remove the grill to expose
The UV Canon has a built-in safety hook on the rear of the unit
securely fastened to the unit when mounting or suspending the unit
from the yoke. Always use this hook in combination with a safety
cable for safe and secure mounting.
UV Canon™ Warranty
UV Canon™ Safety Hook

- www.americandj.com - UV Canon™ Instruction Manual Page 7
A Division of the American DJ® Group of Companies
4295 Charter Street Los Angeles, CA 90058 USA
Tel: 323-582-2650 / Fax: 323-582-2610
Web: www.americandj.com / E-mail: info@americandj.com
6 Amp GMA (3 Amp GMA 220v)
* Voltage is preset at the factory and is not user selectable.
Speci cations and improvements in the design
of this unit and this manual are subject to change without any
UV Canon™ Specifications