American DJ DJ 150 User Manual
American DJ
4295 Charter Street
www.americandj.com
Introduction:
The American DJ
®
Projector 150™ is a truly unique
of effects when used with optional attachments. The unit ships with
four useful projection slides to project different patterns on a wall
or at surface. Customized patterns may be made at home using
your computer, printer, and transparencies. The optional 35mm slide
attachment allow you to project a standard 35mm slide. The optional
oil wheel allows you to use the projector as a liquid oil lamp.
Customer Support:
American DJ
®
provides a toll free customer sup-
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments
or suggestions.
®
Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m.
Voice:
(800) 322-6337
(323) 582-2610
support@americandj.com
To prevent or reduce the risk of electrical shock or re, do
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact your nearest American DJ dealer.
PLEASE do not discard the shipping carton in the trash. Please
recycle when ever possible.
©
American DJ Supply
®
- www.americandj.com - Projector 150™ Instruction Manual Page 2
Projector 150™ Introduction
Rev 5/02
Unpacking:
Every Projector 150™ has been thoroughly tested and
shipping carton for damage that may have occurred during shipping. If
the carton appears to be damaged, carefully inspect your units for any
damage and be sure all accessories necessary to operate the system
further instructions. Please do not return the system to your dealer
without rst contacting customer support.
Projector 150™ Unpacking
Projector 150™ Precautions
©
American DJ Supply
®
- www.americandj.com - Projector 150™ Instruction Manual Page 3
Reset Breaker:
To reset the breaker, push the breaker button in until you hear it pop
back in to place. If the breaker continues to pop, stop using the unit
and contact customer support the unit may require service.
To reduce the risk of electrical shock or re, do not expose this unit
age for your unit
ed or broken. Do not attempt to remove or break off the ground
of electrical shock and re in case of an internal short
serviceable parts inside
Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall
This unit is intended for indoor use only, use of this product out-
doors voids all warranties
Always mount this unit in safe and stable matter
on, pinched by items placed upon or against them.
the manufacturer. See page 7 for cleaning details
such as radiators, heat registers, stoves, or other appliances (in-
cluding amplifiers) that produce heat.
The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
C. The unit has been exposed to rain or water.
marked change in performance.
The Projector 150™ carries a one year (365 days) limited warranty.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) num-
vide a copy of your proof of purchase invoice. You may obtain a R.A.
Halogen Lamp Warning:
This fixture is fitted
with halogen lamps which are highly susceptible
to damage if improperly handled. Never touch the
fixture until the lamps have had ample time to cool.
conditions.
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
©
American DJ Supply
®
- www.americandj.com - Projector 150 ™ Instruction Manual Page 3
Projector 150™ General Instructions
Projector 150™ Features
Projector 150™ Warranty Registration
Projector 150™ Halogen Lamp Precautions
Loading...