American DJ Color Gem User Manual

American DJ

®

User Instructions

CAUTION! Read instructions before installing or plugging unit in.

SPECIFICATIONS: MODEL - Color gem

Weight: 5.5 lbs.
Size: 6""H x 6"W x 9"L
Lamp: ZB-64610 12V 50W
Fuse: 3A
Voltage In: 120V
Working Position: Any Safe position
Duty Cycle: None
Colors: Multi color

Thank you for purchasing the Color gem™ by American DJ®. For your convenience the Color
gem™ has been lamped and is ready to be used, there is no assembly required. Please read the

following instructions before installing or using your new Color gem™.

Operating Instructions:

Unit is ready to be hung or set on flat surface. Unit will react to bass sound of music via the internal microphone.
The Color gem™ features automatic gain control allowing precise sound movement.

HALOGEN LAMP WARNING!

This fixture is fitted with halogen
lamps which are highly suscepti­ble to damage if impr o p e r l y
handled. Never touch lamp with
bare fingers as the oil from your
hands will shorten lamp life. Also,
never move fixture until lamp
has had ample time to cool.
R e m e m b e r, lamps are not cov­ered under warranty conditions.

For best results, we suggest using fog or special effects smoke when using this unit. This will enhance the effect
allowing you to see the beams of light.

Caution! Never open unit when in use. Always disconnect main power before servicing or replacing lamp.
Remember always replace same type lamp and fuses.

Lamp replacement: Remove phillip screws on bottom of unit and open trap door. Disconnect lamp from
socket. Remove and replace lamp. For service contact your American DJ® dealer.

Affordable Quality Lighting Products from American DJ® Los Angeles, CA. 90058