American DJ COB Cannon Wash DW operation manual

User Instructions

A.D.J. Supply Europe B.V.

Junostraat 2

6468 EW Kerkrade

The Netherlands

www.americandj.eu

9/16

ADJ Products, LLC - www.adj.com COB Cannon Wash DW User Manual Page 2

©2016 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted. Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. All non-ADJ Products, LLC brands and product names are trademarks or registered trademarks of their respective companies.

ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of any information contained within this document, and/or as a result of the improper, unsafe, unsufficient and negligent assembly, installation, rigging, and operation of this product.

ADJ Products, LLC - www.adj.com COB Cannon Wash DW User Manual Page 3

Contents

INTRODUCTION ....................................................................................................................................................................... 4

FEATURES ................................................................................................................................................................................ 4

INSTALLATION ......................................................................................................................................................................... 4

SAFETY PRECAUTIONS ............................................................................................................................................................ 5

DMX SET UP ............................................................................................................................................................................ 5

1 CHANNEL MODE .................................................................................................................................................................. 7

2 CHANNEL MODE .................................................................................................................................................................. 7

3 CHANNEL MODE .................................................................................................................................................................. 7

4 CHANNEL MODE .................................................................................................................................................................. 7

5 CHANNEL MODE .................................................................................................................................................................. 7

6 CHANNEL MODE .................................................................................................................................................................. 8

OPERATING INSTRUCTIONS .................................................................................................................................................... 8

MASTER-SLAVE CONFIGURATION ......................................................................................................................................... 10

CAD DRAWING ...................................................................................................................................................................... 11

ADJ RFC OPERATION ............................................................................................................................................................. 11

PHOTOMETRIC CHART .......................................................................................................................................................... 12

OPTIONAL LENS CHANGE ...................................................................................................................................................... 13

DIMMER CURVE CHART ........................................................................................................................................................ 14

POWER CORD DAISY CHAIN .................................................................................................................................................. 14

FUSE REPLACEMENT ............................................................................................................................................................. 14

TROUBLE SHOOTING ............................................................................................................................................................. 14

CLEANING.............................................................................................................................................................................. 15

SPECIFICATIONS .................................................................................................................................................................... 15

ROHS - A great Contribution to the Conservation of Environment ..................................................................................... 17

WEEE – Waste of Electrical and Electronic Equipment ........................................................................................................ 18

NOTES ................................................................................................................................................................................... 19

ADJ Products, LLC - www.adj.com COB Cannon Wash DW User Manual Page 4

INOZIONE INTRODUCTION

Unpacking:Thank you for purchasing the COB Cannon Wash DW by ADJ Products, LLC. Every COB Cannon Wash DW has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact. In the case damage has been found or parts are missing, please contact our toll free customer support number for further instructions. Do not return this unit to your dealer without first contacting customer support. Introduction: The ADJ COB Cannon Wash DW is a DMX intelligent, high powered LED wash fixture. This wash has five operating modes: Sound Active mode, Auto mode, WW/CW Dimmer mode, Static Color mode, and DMX control mode. This fixture can be used in a stand alone mode or connected in a Master/Slave configuration. To optimize the performance of this product, please read these operating instruc- tions carefully to familiarize yourself with the basic operations of this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future reference. Customer Support: If you encounter any problems, please contact your trusted American Audio shop. We also offer the possibility, to contact us directly: You can contact us via our website www.americandj.eu or via email: support@americandj.eu

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will

void your manufactures war- ranty. In the unlikely event your unit may require service please contact ADJ Products, LLC.

PLEASE recycle the shipping carton when ever possible.

FEATURES

• Five Operating Modes

• Electronic Dimming 0-100%

• 5 Selectable Dimming Curves

• 8 Color Macros

• Built in Microphone

• Opitional 40° & 50° Lenses Included

• DMX-512 protocol

• 3-Pin & 5-Pin DMX Connections

• 6 DMX Modes: 1 Channel Mode, 2 Channel Mode, 3 Channel Mode, 4 Channel Mode, 5 Channel Mode, & 6

Channel Mode.

• ADJ RFC compatiable (Not Included)

• Power Cord Daisy Chain (See page 14)

INSTALLATION

The unit should be mounted using a mounting clamp (not provided), affixing it to the mounting bracket that is provided with the unit. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure and is able to support a weight of

10 times the unit’s weight. Also, always use a safety cable that can hold 12 times the weight of the unit when

installing the fixture. The equipment must be installed by a professional, and it must be installed in a place where it is out of the reach

of people’s grasp.

ADJ Products, LLC - www.adj.com COB Cannon Wash DW User Manual Page 5

SAFETY PRECAUTIONS

• To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove or

break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between

this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product outdoors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 15 for cleaning details.

• Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when: A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance. C. The appliance has been exposed to rain or water. D. The appliance does not appear to operate normally or exhibits a marked change in performance.

DMX SET UP

The ADJ COB Cannon Wash DW contains a automatic voltage switch, which will auto sense the voltage when it is plugged into the power source. With this switch there is no need to worry about the correct power voltage, this unit can be plugged in anywhere.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro- tocol used as a form of communication between intelligent fixtures and controllers. A DMX controller sends DMX data instructions from the controller to the fixture. DMX data is sent as serial data that trav- els from fixture to fixture via the DATA “IN” and DATA “OUT” XLR ter- minals located on all DMX fixtures (most controllers only have a DATA “OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of different manufactures to be linked together and operate from a single controller, as long as all fixtures and the controller are DMX compli- ant. To ensure proper DMX data transmission, when using several DMX fixtures try to use the shortest cable path possible. The order in which fixtures are connected in a DMX line does not influence the DMX addressing. For example; a fixture assigned a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, at the end, or anywhere in the middle. When a fixture is assigned a DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit, no matter where it is located in the DMX chain.

ADJ Products, LLC - www.adj.com COB Cannon Wash DW User Manual Page 6

DMX SET UP (continued)

Data Cable (DMX Cable) Requirements (For DMX Operation): The COB Cannon Wash DW can be controlled via DMX-512 protocol. The COB Cannon Wash DW has 6 DMX modes, please see pages 9-10 for the different modes. The DMX address is set on the back panel of the COB Cannon Wash DW. Your unit and your DMX controller require a standard 3-pin or 5-pin XLR connector for data input and data output (Figure 1). We recommend Accu-Cable DMX cables. If you are making your own cables, be sure to use standard 110-120 Ohm shielded cable (This cable may be purchased at almost all pro lighting stores). Your cables should be made with a male and female XLR connector on either end of the cable. Also remember that DMX cable must be daisy chained and cannot be split.

Notice: Be sure to follow figures two and three when making your own cables. Do not use the ground lug on the XLR connector. Do not con- nect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR’s outer casing. Grounding the shield could cause a short circuit and erratic behavior.

Figure 2

XLR Pin Configuration Pin1 = Ground

Pin2 = Data Compliment (negative)

Pin3 = Data True (positive)

Figure 3 Special Note: Line Termination. When longer runs of cable are used, you may need to use a terminator on the last unit to avoid erratic behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is connected between pins 2 and 3 of a male XLR connector (DATA + and DATA -). This unit is inserted in the female XLR connector of the last unit in your daisy chain to terminate the line. Using a cable terminator (ADJ part number Z-DMX/T) will decrease the possibilities of erratic behavior.

Termination reduces signal errors and avoids signal transmission problems and interference. It is always advisable to connect a DMX terminal, (Resistance 120 Ohm 1/4 W) between PIN 2 (DMX-) and PIN 3 (DMX +) of the last fixture.

Figure 4

5-Pin XLR DMX Connectors. Some manufactures use 5-pin DMX- 512 data cables for DATA transmission in place of 3-pin. 5-pin DMX fixtures may be implemented in a 3-pin DMX line. When inserting stan- dard 5-pin data cables in to a 3-pin line a cable adaptor must be used, these adaptors are readily available at most electric stores. The chart below details a proper cable conversion.

3-Pin XLR to 5-Pin XLR Conversion

Conductor

3-pin XLR Female (Out)

5-pin XLR Male (In)

Ground/Shield

Pin 1

Data compliment (- signal)

Pin 2

Data True (+ signal)

Pin 3

Not used Do Not Use

Figure 1

+ 14 hidden pages