American DJ Chameleon User Manual

American DJ

®

MADE IN THE

Chameleon™

U.S.A.

HALOGEN LAMP WARNING!

This fixture is fitted with halogen lamps
which are highly susceptible to damage if
improperly handled. Never touch lamp
with bare fingers as the oil from your
hands will shorten lamp life. Also, never
move fixture until lamp has had ample
time to cool. Remember, lamps are not
covered under warranty conditions.

C a u t i o n ! Always disconnect from main

power before replacing lamps or servicing unit.
Remember to always replace with same lamps
and fuses.

User Instructions

Thank you for purchasing this
American DJ® product. For your
convenience this lighting effect has
been lamped and is ready to be used,
t h e re is no assembly re q u i re d .
Please read the following
i n s t ructions before installing or
using your new unit.

Model: Chameleon

SPECIFICATIONS:

™

Lamp: ZB-EFP 12V 100W
Power: 110V/60Hz
Optics: High Quality Glass Lens
Ventilation: Conventional
Working Position: Any
Weight: 15 lbs.
Size: 10.25” x 11” x 5.75”

American DJ

Operating Instructions:

Unit is ready to be hung or set on the floor. After
plugging in unit, the light will react to the music via
its sound active internal microphone. For best
results use with fog. The Chameleon™ is a sound
active moon flower that spins to the beat of the
music. Featuring 9 dichroic colors plus white, and
an effects switch which gives either a constant
color changing effect or a sound active mode. In
the sound active mode, the color wheel changes,
creating solid or split beams. This button is
located at the back of the unit near the power
cord. The Chameleon™ is made in the USA, and
has a 1 Year Limited Warranty.

To replace lamp; use easy-access door on the
front of the unit. Pull off door, replace bulb and
reassemble. Do not forget to unplug unit before
replacing bulb!

For service, contact your American DJ® dealer.

LOS ANGELES, CA. 90058

®