American DJ BPP-20 User Manual

American DJ

User

Instructions

Thank you for purchasing this American DJ® product. For your convenience this product has been tested and is ready to be used, there is no assembly required. Please read the following instructions before installing or using your new unit.

Product Description:

The BPP-20™ is a 4 channel, 10A per channel power pack with a total capacity of 20 amps. Each channel features two 120V, 3-prong A/C sockets on the rear of the unit, individual fuse for each channel, and green LED lights indicating channels in use. The BPP-20™has two 8 pin din connectors linkable to the TP-1201™ or the FSR-8/System. Designed to mount on truss, stands, or racks. For use with inductive loads.

FRONT VIEW

REAR VIEW

4 5

BPP-20

4 CHANNEL POWER PACK

GENERAL FUNCTIONS (FRONT) :

1. POWER OUTPUT: 4 channel, 3-prong edison output sockets. 8 total OUTput sockets.

2. FUSE: 4 x 10A fuses.

GENERAL FUNCTIONS (REAR) :

3. POWER INPUT: 120AC power input.

4. SIGNAL INPUT: 8 pin din socket, connect to TP-1201™, FSR-800™.

5. SIGNAL OUTPUT: 8 pin din socket, connect to another BPP-20™.

6. GREEN L.E.D.: Indicates which channels are in use.

7. RED L.E.D. + POWER SWITCH: Turn power switch on, Red L.E.D. will be on when connected to power.

For service, contact your American DJ® Dealer.

Caution! Always disconnect the BPP-20™ from

main power before servicing unit, there may be high voltage inside console. Remember to always replace with same fuses.