American DJ Avenger II Instruction Manual

American DJ

User Instructions

SPECIFICATIONS: MODEL - Avenger II™

Weight: 18 lbs. Size: 14"H x 14"W x 16"L Lamp: 2x ZB-64514 - 120V 300W Fuse: 7A Supply Voltage: 120V Working Position: Any Safe position Duty Cycle: maximum 10 min. on/off Colors: 10 Multiple Colored Lenses

Optional: ZB-ADJ300 120V 300W 150 hr. Long Life lamp

also available.

Affordable Quality Lighting Products from American DJ® Los Angeles, CA. 90058

™

WITH 10 LENSES!

CAUTION! Read instructions before installing or operating unit.

HALOGEN LAMP WARNING! This fixture is fitted with halogen

lamps which are highly susceptible to damage if impro p e r l y handled. Never touch lamp with bare fingers as the oil from your hands will shorten lamp life. Also, never move fixture until lamp has had ample time to cool. R e m e m b e r, lamps are not covered under warranty conditions.

Product Discription:

Great effect for mobile DJ's and small clubs, the Avenger II™ produces 20 beams of multi-color light that rotate back and forth to the beat of the music via the internal mic. Fan cooled, extremely reliable. Includes hanging bracket and lamps.

Operating Instructions:

Unit is ready to be hung or set on flat surface. Unit will react to bass sound of music via its internal microphone. Adjust the sensitivity knob on rear of unit for desired effect. Be sure not to obstruct cooling vents. Keep in a well ventilated area. For best results, use fog in order to see the beams of light.

Optional 300W ADJ-300, 150 hr. Long Life lamp also available.

Caution! Never open unit when in use. Always disconnect main power before serving or replacing lamp. Remember always replace same lamp and fuses.

Lamp replacement: Unscrew lamp replacement door. Remove and replace lamp.