American Audio Q-MX2 BPM User Manual
Q-MX2 BPM
USER INSTRUCTIONS
Q-MX2 BPM
Featuring:
Fader “Q” Start
Professional products designed for
the working DJ.
Main Features
• Equipped with high quality Crossfader
(Replaceable)
• VCA Fader for Q-Start Control
• Adjustable Crossfader Curve - changes from
a normal curve to a quick curve (for crabbing)
• Multi-Channel Assignable Crossfader
• 2 Headphone Outputs
• Selectable Voltage 115v~230v
• 3 Channel Mixer
• 3 Phono, 3 Line, 3 Auxiliary Inputs
• 3 Microphone Input - (1) XLR/ 1/4" combo
plug, (2) 1/4" Input Jacks
• Fader "Q" Start on all three channels
• On/Off Switch Controls Fader "Q" Start
Function (for use with the American DJ CD
Players with Fader "Q" Start)
• -30dB Rotary Kills for Treble, Bass & Mids
on all three channels
• Separate gain control for each channel
• High output to headphones
• Soft-touch rubber knobs for better control
• Extremely clean signal to noise ratio
• Light Control Signal Output Jack
• Talk Over Button - Reduces channel output
gain by 15dB +/- 2 dB
• Independent Booth Level Output
• Dual Function Stereo LED Level Indicator -
Indicated Master and PFL (Pre Fader Level)
Signal Levels
• Split Cue Monitoring
• Cue Mixing
• Balanced XLR Master Output
• 4 Signal Output Options - Master (RCA and
Balanced XLR), Booth (RCA) and REC (RCA)
• Automatic BPM Counter
• 100% Push Button Kills (Bass, Mid, and
Treble)
©American DJ® AUDIO Los Angeles, CA 90058 USA
Specifications subject to change without notice.
Q-MX2 BPM User Instructions page 2
Index
• Safety Precautions....................................................................................................p.4
• Operating Introduction.............................................................................................p.4
•
Functions (Front Panel).............................................................................................p.5
• Inputs & Outputs (Rear Panel)................................................................................p.8
• Set-Up......................................................................................................................p.10
• Replacing the Crossfader........................................................................................p.13
• Operating Determinations......................................................................................p.13
• Technical Specifications........................................................................................p.14
• Warranty & Service.................................................................................................p.14
Important Precautions
1. Be sure to save the packing carton in case
you may ever have to return the unit for
service.
2. Read all documentation before attempting to
operate your new mixer. Please save all your
documentation for future reference.
3. Do not spill water or other liquids in to or
on to your mixer.
4. Be sure that the local power outlet matches
that of the required voltage for your mixer.
5. Do not attempt to operate this unit if the
power cord has been frayed or broken.
Please route your power cord out of the way
of foot traffi c.
6. Always have the front gain controls set to
their lowest level during initial power-up to
prevent speaker damage.
7. Disconnect from main power before making
any type of connection.
8. Do not remove the top cover under any
conditions. There are no user serviceable
parts inside.
9. Disconnect the unit’s main power when left
unused for long periods of time.
Introduction
Introduction:
Congratulations and thank you for purchasing the
American DJ® Q-MX2BPM™ mixer. This mixer is a
representation of American DJ’s continuing commitment to produce the best and highest quality products
at an affordable price. This mixer includes sever al innovative features that pack a big punch! The Q-MX2
BPM™ comes with a 2 year limited warranty!
Please read and understand this manual completely
before attempting to operate your new mixer. This
booklet contains important information concerning the
proper and safe operation of your new mixer.
Unpacking:
Carefully open and unpack your mixer. Be sure to
save the packaging in case you may ever need to
return your unit to the factory . After unpac king, inspect
the mixer for any type of damage that may have
occurred during shipping or transit. If you notice any
type of damage notify your dealer immediately for
instructions.
Set-Up Precautions:
Please make any connections bef ore you plug the unit
in. Be sure the Power switch is in the OFF position
before connecting other devices to the mix er . All fader
and volume controls should be set to 0 or minimum
position, before the device is s witched on. If the de vice
has been exposed to drastic temperature fluctuation
(e.g. after transportation), do not switch on the mixer
immediately. The arising condensation of water might
damage your device. Leave the device switched off
until it has reached room temperature.
©American DJ Supply® - www.americandj.com - Q-MX2 BPM User Instructions page 3
FRONT PANEL - CONTROLS AND FUNCTIONS
10
9
8
7
6
5
4
11
12
13
14
15
16
17
18
19
20
21
22
3
23
2
1
2
1. FEATHER FADER PLUS™ CROSSFADER - Blends the output signals of any channels assigned to "X"
or "Y." When the fader is in the full "X" position, the output signal of any channels assigned to "X" will be
controlled by the master volume level. The same fundamentals will apply for "Y." Sliding the fader from
one position to another will vary the output signals of the "X" and "Y" channels respectively. When the
crossfader is set in the center position, the output signals of both the "X" and "Y" channels will be even.
2. HEADPHONES JACKS - These jacks are used to connect your headphones to the mixer. Use head phones only rated at 8 ohms to 16 ohms. Most DJ headphones are rated at 16 ohm, these are highly
recommended. Two different headphone jacks are conveniently located on the mixer, one on the face and
one on the front side panel. Always be sure the Cue Level Volume (6) is set to minimum before you
put the headphones on.
3. FADER ASSIGN BUTTONS - These buttons are used to assign a channel to the crossfader. When a
channel is assigned to "X," the left side (X-side) of the crossfader will control that channels output level.
The "Y" assign works in the same fashion. When a channel is assigned to neither "X" nor "Y" the output
volume will only be controlled by the channel's fader level. These button also function as a "TRANS
EFFECT" A Trans Effect is an effect similar to cutting the output signal with your transformer switches.
©American DJ Supply® - www.americandj.com - Q-MX2 BPM User Instructions page 4
Loading...