American Audio q-d6 User Manual

Rev. 2/05

™

Q-D6

Professional Preamp Mixer

American Audio

Los Angeles Ca. 90058

www.americanaudio.us

4295 Charter Street

Q-D6™ Unpacking

MAIN FEATURES....................................................................................................................................2

ELECTRICAL PRECAUTIONS................................................................................................................3

SAFETY PRECAUTIONS........................................................................................................................4

INTRODUCTION....................................................................................................................................5

SET-UP PRECAUTIONS.........................................................................................................................5

UNPACKING.........................................................................................................................................6

QUICK START.........................................................................................................................................6

FUNCTIONS AND CONTROLS

TOP PANEL.................................................................................................................................7

FRONT AND REAR PANEL.......................................................................................................10

CLEANING......................................................................................................................14

CROSSFADER REPLACEMENT.........

..................................................................................................14

WARRANTY.........................................................................................................................................15

SPECIFICATIONS.....................................................................................................................16

Q-D6™ Main Features

• Feather Crossfader

• 2 Phono/1 Aux, 3 Line Inputs

• Fader “Q” Start

• Q-Start Compatible (for use with compatible American Audio CD Players )

• -26dB Rotary Kills for Treble, Bass and Mids on both channels

• High output to headphones

• Extremely clean signal to noise ratio

• Talk Over Switch

• Master LED Level Indicator Indicates Master Signal Levels

• Cue Mixing

• Separate gain control for each channel

• Hot Swap Crossfader

• Separate Mic EQ Section

©American Audio® - www.americanaudio.us - Q-D6™ Instruction Manual Page 2

Q-D6™ Electrical Safety Precautions

ELECTRICAL PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOC K

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CA UT IO N: T O RE DUC E TH E RI S K OF ELE CT RIC SHOCK, D O NOT REMOVE THE CO VER (OR BACK). T H E R E A RE NO US E R S E RV I CE A BL E PA RT S INS ID E R EF ER SERVI CE TO YO UR AUTHO RI ZED AMERICAN A UDIO® SERVICE TECHNICIAN.

The exclam ation point within an equilate ral triangle is intended to alert the user to the presence of important operatin g and maintenance (servicing) instru ctions in the litera ture accompanying the applia nce.

IMPORTANT SAFETY INSTRUCTIONS

READ INSTRUCTIONS — All the safety and operating

instructions should be read before the product is operated.

RETAIN INSTRUCTIONS — The safety and operatin

instructions should be retained for future reference.

HEED WARNING

in the operating instructions should be adhered to.

FOLLOW INSTRUCTIONS — All operating and use

instructions should be followed.

CLEANING

a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids since they may corrode the cabinet

ATTACH MENTS — Do no t use atta chmen ts not

recommended by the product manufacturer as they may cause hazards.

WATER AND MOISTURE

near bowl, kitchen sink, or laundry tub; in or near a swimming pool; and the like.

ACCESSORIES

unstable cart, stand, tripod, bracket, or table. Th product may adult, and serious damage to the product. Use only wit h a cart , s tan d, tr ipo d, br ack et, o r t abl e recommended by the manufacturer, or sold the product. Any mounting of the product shoul follow the manufacturer’s instructions, and should use manufacturer

CART

moved uneven surfaces may cause the product and car combination to overturn

VENTILATION

provided for ventilation and to ensure reliabl operation of the product and to protect it from overheating, and these openings m ust not be blocked or covered. The openings should never be blocked by placing the product on or other placed rack unless proper ventilation manufacturer’s instructions have been adhered

POWER SOURCES

only from the type of power source indicated on marking label. If you are not sure of the type of power supply dealer or local power company.

LOCATIO

stable location.

NONUSE PERIOD

should be unplugged from the used for a long period of time.

S — All warnings on the product and

— The product should be cleaned only with

water — for example, near a bathtub, wash

a mounting accessory recommended by the

— A product and cart combination should be

with care. Quick stops, excessive force, and

— Slots and openings in the cabinet are

similar surface. This product should not be

in a built-in installation such as a bookcase or

N – The appliance should be installed in a

— Do not use this product

a wet basement;

— Do not place this product on an

fall, causing serious injury to a child or

with

a bed, sofa, rug,

is provided or the

— This product should be operated

to your home, consult your product

S – The power cord of the appliance

outlet when left un-

the

GROUNDING OR POLARIZATION

• If this product is equipped with a polarized alternating

to.

current line plug the other), is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

• If this p roduct is e quipped wit h a three-w ire grounding type plug, pin,

it will only fit into a grounding type power outlet.

This

is a safety feature. If you are unable to insert the plug replace your obsolete safety purpose of the grounding type plug.

POWER-CORD PROTECTION

should be routed so that they are not likely walked on or pinched by against them, paying particular attention plugs, convenience receptacles, and the point where they exit from the product

OUTDOOR ANTENNA GROUNDING

antenna or cable system is connected to the product be sure the antenna or cable system as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides informatio with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, co nn ecti on to g roun ding el ectr odes, a nd requirements for the grounding electrode. See Figure A.

LIGHTNING

during and unused for long periods of time, unplug it from the

wall outlet and disconnect the antenna or cable system. This due to lightning and power-line surges.

POWER LINES

not be located or other electric light or power circuits, or where it

fall into such power lines or circuits. When

can installing an outside antenna system, extreme car should be taken lines or circuits as contact with them might be

OVERLO ADING — Do not overload wal l outl ets,

extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

(a plug having one blade wider than

it will fit into the outlet only one way. This

still fail to fit, contact your electrician to

a plug having a third (grounding)

into the outlet, contact your electrician to

— For added protection for this product

a lightning storm, or when it is left unattended

outlet. Do not defeat the

- Power-supply cords

items placed upon or

will prevent damage to the product

— An outside antenna system should

in the vicinity of overhead power lines

to keep from touching such power

to be

to cords at

— If an outside

is grounded so

fatal.

ELECTRI SERVICE EQUIPMENT

Fig.

OBJECT AND LIQUID ENTRY

any kind

into this product through openings as they may touch dangerous voltage points or short-out parts that could result Never spill liquid of any kind on the product.

SERVICING

DAMAGE REQUIRING SERVICE

• When the power-supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into

• If the product has been exposed to rain or water.

• If the product does not operate normally by following

• If the product has been dropped or damaged in any

• When the product exhibits

REPLACEMENT PARTS

SAFETY CHECK - Upon completion of any service or

WALL OR CEILING MOUNTING

HEAT

GROUND CLAM

— Do not attempt to service this product yourself as opening or removing covers may expose you

to dangerous voltage or other hazards. Refer all

servicing to qualified service personnel

from the wall outlet and refer servicing to qualifie service personnel under the following conditions:

the product

the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result damage and will often require extensive work by qualified technician normal operation.

way.

performance — this indicates a need for service.

are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

repairs perform safety checks is in proper operating condition.

not be mounted to a wall or ceiling.

sources such as radiators, heat registers, stoves, or other products (including heat

to this product, ask the service technician to

— The product should be situated away from heat

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

- Never push objects of

in a fire or electric shock.

to restore the product to its

-- W hen replacement parts

to determine that the product

amplifiers) that produce

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNI (NEC SECTION 810-20)

GROUNDING CONDUCTOR (NEC SECTION 810-21)

- Unplug this product

a distinct change in

— The product should

©American Audio® - www.americanaudio.us - Q-D6™ Instruction Manual Page 3

NEC — NATIONAL ELECTRICAL CODE

Q-D6™ Safety Precautions

1. For adult use only - Keep out of the reach of children.

2. Water and Moisture - The player should not be used near water - for example, near a bath tub, kitchen sink, laundry tub, in a wet ment or near a swimming pool, etc.

base-

Do not spill water or other liquids in to or on to your mixer.

3. Ventilation - The Mixer should be situ so that its location or position does not inter fere with its proper ventilation. For

ated

example, the Mixer should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventila tion openings.

4. Heat - The Mixer should be situated away from heat sources such as radiators, heat reg

isters, stoves, or other appliances (including amplifiers) that produce heat.

5. Power Sources - The Mixer should be con nected to a power supply (

wall outlet) only of

the type described in the operating instructions or as marked on the Mixer.

8. Never plug this mixer in to a dimmer pack.

9. Do not let insecticides, benzene, or thinner come in contact with the surface of the

unit.

10. This unit is intended for indoor use only, use of this product outdoors voids all warranties.

11. Always mount this unit in safe and stable matter.

12. Disconnect from main power before making any type of connection.

13. Cleaning - The mixer should be cleaned only as recommended by the manufacturer. Use a soft cloth to wipe down the outside of the

For stubborn stains moisten a soft cloth

unit. with glass cleaner or other mild detergent to

away any stains. Use a soft cloth to wipe

wipe

residual cleaner. Never use volatile clean-

any ers such as benzene

unit, these cleaners will damage the units

your

, solvent, or thinner to clean

surface.

14. Handle the power supply cord carefully. Do not damage or deform; it may cause electric shock or malfunction when used. Hold plug attachment when removing from wall outlet. Do not pull on the cord.

6. Servicing -The user should not attempt to service the Mixer beyond that described in the operating instructions. There are no user ser viceable parts

inside. All other servicing should

be referred to qualified service personnel. The Player should be serviced by qualified service personnel when: A. The power-supply cord or the plug has been damaged. B. Objects have fallen, or liquid has been spilled into the Mixer. C. The Mixer has been exposed to rain or water. D. The Mixer does not appear to operate normally or exhibits a marked change in performance.

7. Never disassemble or modify your unit in any way, doing so will void your manufactures warranty.

15. To avoid electric shock, do not open the top cover when the unit is plugged in. If prob lems occur with the unit, call American Au

dio®

customer support.

16. Do not place metal objects or spill any liq

uids inside or on the mixer. Electric shock or malfunction may occur.

17. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience recep

tacles, and the point where they exit from the mixer. Route your power cord out of the way of foot traffic.

18. Always have the front gain controls set to their lowest level during initial power-up to pre

vent speaker damage.

Q-D6™ Introduction

Introduction:

Congratulations and thank you for purchasing the American Audio® Q-D6™ mixer. This mixer is a representation of American Audio’s continuing commitment to produce the best and highest quality audio products possible at an affordable price. The Q-D6™ comes with a 2 year limited warranty! Please read and understand this manual completely before attempting to operate your new mixer. This booklet contains important information concerning the proper and safe operation of your new mixer.

Customer Support: American Audio® provides a toll free customer support line, to provide set up help and to answer any question should you encounter problems during your initial set up or operation. You may also visit us on the web at www.americanaudio.us for any comments or suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:30 p.m. Paciﬁc Standard Time. Voice: (800) 322-6337 Fax: (323) 582-2610 E-mail: support@americanaudio.us To purchase parts online visit http://parts.americandj.com

Caution! There are no user serviceable parts inside this mixer. Do not attempt any repairs yourself, doing so will void your manufactures warranty. In the unlikely event your mixer may require service, please contact American Audio® customer support.

Do not discard the packing carton in the trash. Please recycle when ever possible.

Q-D6™ Set-Up Precautions

Please be sure to make any connections before plugging the mixer in to an electrical outlet. All fader and volume controls should be set to zero or minimum position, before the mixer is switched on. If the mixer has been exposed to drastic temperature ﬂuctuation (e.g. after transportation), do not switch on the mixer immediately. The arising condensation of water might damage your device. Leave the device switched off until it has reached room temperature.

Operating Determinations:

• When installing this mixer, please make sure that the device is not exposed or will not be exposed to extreme heat, moisture or dust!

• Do not operate the mixer in extremely hot (more than 30°/100°F) or extremely cold (less than 5°C/40°F) surroundings.

• Keep the unit out of direct sunlight and away from heaters.

• Operate the mixer only after becoming familiar with its functions. Do not permit operation by persons not qualiﬁed for operating the mixer. Most damages are the result of unprofessional operation!

• Do not attempt to operate this mixer if the power cord has been frayed or damaged.

• Disconnect from main power before making any type of connection.

• Do not attempt to operate this mixer, if it becomes damaged in any way.

• Never operate this mixer when it’s covers are removed.

• To reduce the risk of electrical shock or ﬁre, do not expose this mixer to rain or moisture.

• This mixer is intended for indoor use only, use of this product outdoors voids all warranties.

• During long periods of non-use, disconnect the mixer’s main power.

Q-D6™ Unpacking

Every Q-D6™ has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your mixer for any damage and be sure all equipment necessary to operate the mixer has arrived intact. In case damage has been found or parts are missing, please contact our toll free customer support number for further instructions, please do not return the mixer to your dealer.

Q-D6™ Quick start instructions

American Audio would like to thank for your purchase of this great product. For those of you that are to impatient to read the entire user manual we have compiled these quick start instructions. We hope that you will at least read through these instructions to familiarize yourself with the basic understanding of the unit. The Q-D6 is part of American Audio’s continuing evolution in audio technology. This unit has been built and designed with the typical DJ in mind, by DJ’s. We have attempted to provide you with the most reliable product on the market by using only components made from quality products.

MASTER LEVEL - Use this level control to set your volume output. Try never to send an output of more than +4dB to your system. Signal at levels higher than this will start to distort and may cause damage to your system and speakers. Remember that a distorted signal from you mixer will only be multiplied throughout your system.

CHANNEL GAIN LEVEL - The channel trim levels are not to be used as volume controls, never use the channel gain to set the output volume. These controls are used to aid in distortion control. Use these control to preset your signal level before the crossfader. With your channel faders in the maximum position, use the channel trim level to set an average output level of about +4dB on you master level meter.

HEADPHONES - To avoid sever hearing damage, always be sure the headphone level is set to minimum before plugging them in. Never put the headphone on without making sure the headphone level is turned down.

MIC - The mic connector uses a 1/4” jack unbalanced connector. The DJ mic has an independent volume control. When feedback occurs when using the mic, try lowering the “low” level this may reduce the feedback. Always leave the mic level to it’s minimum level when not in use.

Q-START FEATURE - This function works in conjunction with a compatible American Audio or American DJ “Q”Start CD player. When used with a compatible CD player, you can use the crossfader to start and stop the CD Player with the slide of the fader. The ON/OFF “Q ”START switch activates this FADER “Q ”START feature.

+ 11 hidden pages

American Audio q-d6 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual