A800 ROBOT VACUUM CLEANER
Owner’s Guide
Meet our amarey A800 Robot
Thank you for purchasing our amarey Robot Vacuum Cleaner. And welcome to amarey Robotic Family.
If you have any problems, please don’t hesitate to contact our amarey Customer Service Center by email . You can also subscribe on website (https://www.iamarey.com) to get the latest information for new amarey Robot Vacuum Cleaner.
Life can be so easy with amarey.
Table of Contents
Important Safety Instructions·················· 02 About amarey A800 Robot ····················· 03 Using amarey A800 Robot ····················· 07 Regular amarey A800 Care···················· 13 Troubleshooting·······································15 Specifications··········································17 amarey Customer Care ························· 17
Important Safety Instructions
Read all instructions before operating Robot. Save these instructions for future reference.
•If you have special objects that could potentially be damaged by the bumping, remove these objects from the floor.
•Do not let kids sit or stand on Robot. Children and pets should be supervised when Robot is operating.
•Do not make Robot for outdoor use.
•Do not clean wet messes with your Robot.
•Do not use Robot to pick up spills of water bleach, paint, other chemicals.
•Do not expose Robot to freezing temperatures .
•Do not use Robot to pick up flammable or combustible materials such as gasoline, printer, etc.
•Ensure that Robot cannot get caught on clothing, socks, pull cords for blinds or curtains, power cords, etc.
•If the power cord is damaged, do not use any other power supply cord. For replacement cords, please contact amarey Customer Service Team.
•Only charge one of the following amarey batteries: maximum 14.4V, 2600mAh Lithium-ion battery. Other type of batteries may burst causing injury. Always contact amarey Customer Service Team for the correct replacement of battery.
•Always remove the battery from Robot and accessories before long-term storage or transportation.
•The battery must be removed before Robot is disposed. Remove Robot's two Battery Door's screws, and then remove the battery by disconnecting the quick connector.
•Contact your local waste management authority for battery recycling and disposal regulations in your area.
•
WARNING Chemical Exposure: If the battery pack is leaking, do not allow the liquid to come in contact with skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. Place the battery (the used battery pack included when the robot will be disposed) in a sealed plastic bag and dispose of safely according to local environmental regulation.
•
WARNING Fire or Explosion Hazard: Do not crush or dismantle battery packs. Do not heat or place the battery pack near any heat source or direct sunlight. Do not incinerate or short-circuit the battery pack. Do not subject batteries to mechanical shock.
Battery and Charging / Information
Lithium-ion Battery
Important: Lithium-ion batteries and products that contain Lithium-ion are subject to stringent transportation regulations. If you need to ship this product (with the battery included for service, travel or any other reason, you MUST comply with the following shipping instructions:
•Remove the Lithium-ion battery from the product.
•Place a piece of tape over the battery's metal charging contacts.
•Reinstall the battery (with the tape on it) in the product and secure the battery door.
•Package the product in its original packaging or in your own packaging that prevents any movement during transportation.
•Ship via ground transportation only (no air shipping).
Battery Storage
• If storing Robot off the Charging Dock, remove the battery first. Then store Robot and the battery in a cool, dry place.
02
About amarey A800 Robot
1.1 Robot
Dock Button
To send A800 Robot back to the Charging
Dock, press on Robot or press on the
Remote Control.
|
LED Light |
|
|
Power On / Power Off / Cleaning |
|
|
Press and hold on to Power On or Power Off |
|
|
Press to start or stop Cleaning |
|
LED COLOR |
WHAT IT MEAN |
|
Blinking pink |
Charging |
|
Solid blue |
Standby / Cleaning / Fully charged |
|
Solid pink |
Low power and returning to Charging Dock |
|
Off |
Robot is off or conserve power, the light automatically turns off when |
|
Robot is not docked to the Charging Dock and has been inactive for 1 |
||
|
||
|
minute |
|
Flashing / Solid red + Beeping |
Robot has an error. Refer to the “Troubleshooting>Error Tone” section |
|
|
in this guide for solutions |
03
Bin Release Button |
|
|
Anti-collision Sensors |
Anti-drop Sensors |
|
|
Charging Contact Points |
|
Swivel Wheel |
|
Side Brushes |
|
Battery Door |
Wheels |
|
Main Power Switch (On/Off) |
Brush Guard |
ON OFF |
|
|
|
Dust Bin |
Rolling Brush |
|
04 |
Loading...