Amana NTW4605EW1 Owner’s Manual

Top-Loading Washer

Laveuse à chargement

Use and Care Guide

Para una versión de estas instrucciones en español, visite www.amana.com

Table of Contents

WASHER SAFETY ..................................................................... 2

WHAT’S NEW UNDER THE LID? ............................................. 3

CONTROL PANEL AND FEATURES ........................................ 4

CYCLE GUIDE ........................................................................... 6

USING YOUR WASHER ............................................................ 7

WASHER MAINTENANCE ........................................................ 9

TROUBLESHOOTING ............................................................. 11

WARRANTY ............................................................................. 16

ASSISTANCE OR SERVICE ................................BACK COVER

par le dessus guide

d’utilisation et

d’entretien

Table des matières

SÉCURITÉ DE LA LAVEUSE .................................................. 17

QUOI DE NEUF SOUS LE COUVERCLE? ............................. 18

TABLEAU DE COMMANDE ET

CARACTÉRISTIQUES ............................................................. 19

GUIDE DE PROGRAMMES .................................................... 21

UTILISATION DE LA LAVEUSE .............................................. 22

ENTRETIEN DE LA LAVEUSE ................................................ 25

DÉPANNAGE ........................................................................... 27

GARANTIE ................................................................................ 34

ASSISTANCE OU SERVICE ..............COUVERTURE ARRIÈRE

W10740545A W10740546A-SP

Designed to use only HE High Efciency

detergents. Conçue pour l’utilisation d’un détergent

haute efcacité seulement.

Washer Safety

What’s New Under the Lid?

Your new washer will operate differently than your past agitator-style washer.

Cleaning with Less Water

Traditional agitator-style

washer

The washer automatically adjusts the water level to the load size—no water level selector is needed.

Washer with low-water

wash system

Automatic Load Size Sensing

Once you start the cycle, the washer will ll to the water level. When the washer is done lling, it will start to agitate after it

determines the correct water level for the load. This low-water wash method uses less water and energy

compared to a traditional agitator-style washer.

Choosing the Right Detergent

Use only High Efciency detergents. The package will be marked “HE” or “High Efciency.” Low-water washing creates

excessive sudsing with a regular non-HE detergent. Using regular detergent will likely result in longer cycle times and reduced rinsing performance. It may also result in component failures and noticeable mold or mildew. HE detergents are made to produce the right amount of suds for the best performance. Follow the manufacturer’s instructions to determine the amount of detergent to use and do not go over the Max line. See “Using Laundry Product Dispensers” for more information.

Use only High Efciency (HE) detergent.

Improved Cleaning

Low-water cleaning means concentrated cleaning. Rather than diluting detergent as done in an agitator-style washer, this washer delivers the detergent directly to the soils. This low water wash also allows the clothing to move in a more effective way to remove soils.

For best performance, it is recommended to load items in loose heaps evenly around the washplate.

As the washer dampens and moves the load, the level of the items will settle in the basket. This is normal, and does not indicate that more items should be added.

IMPORTANT:

• You will not see a washer basket full of water as with your past agitator-style washer. It is normal for some of the load to be above the water line.

• After the washer basket lls to the selected water level, the lid must be closed before the wash cycle can start. If lling stops

with the lid open, close lid and press START button.

Normal Sounds You Can Expect

At different stages of the wash cycle, you may hear sounds and noises that are different from those of your previous washer. For example, you may hear a clicking and hum at the beginning of the cycle, as the lid lock goes through a selftest. There will be different kinds of humming sounds as the washplate moves the load and as basket is slowing down to a stop. And sometimes, you may hear nothing at all, as the washer determines the correct water level for your load or allows time for clothes to soak.

Accessories

Enhance your new washer with the following genuine Whirlpool Accessories. For more information on options and ordering, call 1-800-901-2042 or visit us at: www.whirlpool.com/accessories. In Canada, call 1-800-807-6777 or visit us at www.whirlpoolparts.ca.

Fabric Softener Dispenser

This convenient fabric softener dispenser connects to the agitator and saves you from manually adding fabric softener during the rinse cycle.

Control Panel and Features

Not all features and options are available on all models.

SOIL LEVEL

Select the most suitable setting for your load. For heavily soiled and sturdy fabrics, select Heavy Soil Level for more wash time, if needed. For lightly soiled and delicate fabrics, select Light Soil Level for less wash time, if needed. Lighter soil level setting will help reduce tangling and wrinkling.

WASH TEMPERATURE

Wash Temperature senses and maintains uniform water temperatures by regulating incoming hot and cold water.

Select a wash temperature based on the type of fabric and soils being washed. For best results and following the garment label instructions, use the warmest wash water safe for your fabric.

■ On some models and cycles, warm and hot water may

be cooler than your previous washer.

■ Even in a cold and cool water wash, some warm water

may be added to the washer to maintain a minimum temperature.

WASH CYCLE KNOB

Use the Wash Cycle knob to select cycles on your washer. Knob does not advance during the progress of the cycle, see cycle status lights for each stage of the process. See “Cycle Guide” for detailed descriptions of cycles.

START/PAUSE/UNLOCK LID BUTTON

Press to start the selected cycle; press again to pause the cycle and unlock the lid. Press and hold for 3 seconds to cancel a cycle.

NOTE: If the washer is spinning, it may take several minutes to unlock the lid.

Appearance may vary.

CYCLE STATUS LIGHTS INDICATOR

The Cycle Status Lights show the progress of a cycle. At each stage of the process, you may notice sounds or pauses that are different from traditional washers.

SENSING/FILL When the START/Pause button is pressed, the washer will

ll to an initial water level and begin sensing to determine

the load size. If the lid is closed when the washer is done sensing, the lid will lock and the washer will continue

lling to begin operation. The lid will remain locked for the

rest of the cycle unless the cycle is Paused or Cancelled.

If the lid is open when the water stops entering the

washer, the cycle will not begin until the lid has been closed and the START/Pause button is pressed. If the cycle has not been started within 10 minutes of the water

lling the washer, the washer will pump out the water.

NOTE: Avoid opening lid during sensing phase. The

sensing process will start over when the washer is restarted. The Sensing/Fill light may also come on during the Soak and Wash portions of the cycle. This is normal. To restart the washer after the lid has been opened press START.

WASH You will hear the motor and agitator moving the load.

During the rst stage of the sensing/wash cycle, water will partially ll the washer and then begin to move the

load. It is normal to have the sensing light on during this stage. You will hear the agitator rotate, followed by a several second pause. This process will repeat for several minutes, allowing the entire load to become saturated. The lower water level combined with HE detergent at this stage allows for concentrated cleaning. Concentrated cleaning delivers the detergent directly to the soils. It is normal for the load to be above the water line during this stage. At the beginning of the second stage, the washer will add water to the correct level based on the load size. You will hear the agitator move quicker during this stage of the wash cycle. The motor sounds may change at different stages in the wash cycle.

RINSE

You will hear sounds similar to the wash cycle as the washer rinses and moves the load. You may hear

the motor turning on briey (short hum) to move the basket while lling.

FINAL SPIN

The washer spins the load at increasing speeds for proper water removal, based on the selected cycle and spin speed.

CYCLE COMPLETE

Once the cycle is complete, this light will come on. Remove the load promptly for best results.

LID LOCKED

To allow for higher spin speeds, the

lid will lock and the Lid Locked light will turn on. When this light is lit, the lid is locked and cannot be opened. When this light is blinking, the washer is paused. When this light is off, the lid can be opened.

After a cycle is started, water will enter washer. Lid will be unlocked during the Sensing/Fill process. If you need to open the lid to add a garment after this point, you must press START/Pause and wait for the lid to unlock. The lid will only unlock after washer movement has stopped. Depending on where in the cycle you try to pause, it may take several seconds to several minutes for the lid to unlock. Press START/Pause to resume the cycle.

Cycle Guide

For best fabric care, choose the cycle that best ts the load being washed. Recommended settings for best performance are shown in

Bold. Not all cycles and options are available on all models.

Items to wash: Cycle: Wash

Temperature*:

Large items such as sheets, sleeping bags, small comforters, jackets, small washable rugs

Casual and mixed loads, jeans, towels, sturdy fabrics

Cottons, linens, and mixed garment loads

Bright or darkly colored cottons, linens, casual and mixed loads

No-iron fabrics, cottons, perm press, linens, synthetics

Machine-wash silks, lingerie, washable wools

Hand-washed garments or dripping wet items

Swimsuits and items requiring rinsing without detergent

No clothes in washer

*All rinses are cold.

Bulky Items Hot

Deep Water

Wash

Normal Hot

Cold Wash Cold Heavy Cold water with an additional wash action gently lifts stains

Casual Hot

Delicate Hot

Drain/

Spin

Rinse/

Spin

Clean Washer

with affresh

Cold rinse only Heavy Combines a rinse and high speed spin for loads requiring

Soil

Level:

Warm

Cool Lights Cool Darks

Cold

Hot

Warm

Cool Lights Cool Darks

Cold

Warm

Cool Lights Cool Darks

Cold

Warm

Cool Lights Cool Darks

Cold

Warm

Cool Lights

Cool Darks

Cold

N/A Heavy This cycle uses a spin to shorten drying times for heavy

Hot

Warm Cool Lights Cool Darks

Cold

Light Use this cycle to wash large items such as jackets and small

comforters. The washer will ll with enough water to wet

down the load before the wash portion of the cycle begins, and uses a higher water level than other cycles.

Medium Provides additional water and alternating wash action for

heavily soiled mixed loads. Water-level sensing process may take longer for some items than for others because they will absorb more water than other fabric types.

Heavy Use this cycle for normally soiled cottons and mixed fabric

loads.

while caring for fabrics. Settings may be adjusted as desired, but must use only cold water settings.

Medium Use this cycle to wash loads of no-iron fabrics such as sport

shirts, blouses, casual business clothes, permanent press, and blends.

Light Use this cycle to wash lightly soiled garments indicating

“Machine Washable Silks” or “Gentle” cycle on the care label. Place small items in mesh garment bags before washing.

fabrics or special-care items washed by hand. Use this cycle to drain washer after cancelling a cycle or completing a cycle after a power failure.

an additional rinse cycle or to complete a load after power interruption. Also use for loads that require rinsing only.

Light Use this cycle every 30 washes to keep the inside of your

washer fresh and clean. This cycle uses a higher water level. Use with affresh® Washer Cleaner tablet or liquid chlorine bleach to thoroughly clean the inside of your washer. This cycle should not be interrupted. See “Washer Care.”

IMPORTANT: Do not place garments or other items in the washer during the Clean Washer with affresh® cycle. Use this cycle with an empty wash tub.

Cycle Details:

Using Your Washer

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, re, or electrical shock.

1. Sort and prepare your laundry

■ Empty pockets. Loose change, buttons, or any small

object can pass under the agitator and become trapped, causing unexpected sounds.

■ Sort items by recommended cycle, water temperature,

and colorfastness.

■ Separate heavily soiled items from lightly soiled.

■ Separate delicate items from sturdy fabrics.

■ Do not dry garments if stains remain after washing,

because heat can set stains into fabric.

■ Treat stains promptly.

■ Close zippers, fasten hooks, tie strings and sashes, and

remove non-washable trim and ornaments.

■ Mend rips and tears to avoid further damage to items

during washing.

Helpful Tips:

■ When washing water-proof or water-resistant items,

load evenly.

■ Use mesh garment bags to help avoid tangling when

washing delicate or small items.

■ Turn knits inside out to avoid pilling. Separate lint-takers

from lint-givers. Synthetics, knits, and corduroy fabrics will pick up lint from towels, rugs, and chenille fabrics.

NOTE: Always read and follow fabric care label instructions to avoid damage to your garments.

2. Add laundry products

Add a measured of amount of HE detergent or single-dose laundry packet into the basket.

If using Oxi-type boosters, color-safe bleach, or fabric softener crystals, add to the bottom of the washer basket before adding clothes.

IMPORTANT: Use only High Efciency detergents. The package will be marked “HE” or “High Efciency.” Low-

water washing creates excessive sudsing with a regular non-HE detergent. Using regular detergent will likely result in longer cycle times and reduced rinsing performance. It may also result in component failures and noticeable mold or mildew. HE detergents are made to produce the right amount of suds for the best performance.

NOTE: Follow the manufacturer’s instructions to determine the amount of laundry products to use.

3. Load laundry into washer

6. Select SOIL LEVEL

Load garments in loose heaps evenly around basket wall. For best results, do not pack the load tightly. Do not wrap large items such as sheets around the agitator; load them in loose piles around the sides of the basket. Try mixing different sized items to reduce tangling.

IMPORTANT: Do not tightly pack or force items into washer. Items need to move freely for best cleaning and to reduce wrinkling and tangling.

4. Add liquid chlorine bleach

to dispenser

Liquid

Chlorine Bleach

Do not overll, dilute, or use more than 1 cup (250 mL). Do not use color-safe bleach or Oxi products in the same cycle with liquid chlorine bleach.

5. Select cycle

Once you select a cycle, select the soil level by turning the Soil Level knob to the desired setting.

7. Select WASH TEMPERATURE

Once you select a cycle, select the wash temperature by turning the Wash Temperature knob to the desired setting.

Always read and follow fabric care label instructions to avoid damage to your items.

Wash Temp Suggested Fabrics

Hot

Some cold water is added to save energy. This will be cooler than your hot water heater setting.

Warm Some cold water will be added, so this will be cooler than what your previous washer provided.

Cool Lights

Warm water is added to assist in soil removal and to help dissolve detergents. Cool is slightly warmer than cold.

Whites and pastels Durable items Heavy soils

Bright colors Moderate to light soils

Colors that bleed or fade

Light soils

Turn cycle knob to choose your wash cycle. For more information, see “Cycle Guide”.

Cool Darks

Warm water may be added to assist in soil removal and to help dissolve detergents. Cool isnslightly warmer than cold.

Cold This is the temperature from your faucet. If your tap cold water is very cold, warm water may be added to assist in soil removal and help dissolve detergent.

Colors that bleed or fade

Dark soils

Dark colors that bleed or fade

Light soils

Washer Maintenance

8. Press START/Pause to begin

wash cycle

Press the START/Pause/Unlock Lid button to start the wash

cycle. When the cycle has nished, the CYCLE COMPLETE

indicator will light. Promptly remove items after cycle has completed to avoid odor, reduce wrinkling, and rusting of metal hooks, zippers, and snaps.

Adding garment(s)

During the Fill/Sensing phase, open lid and add 1 or 2 missed garments. Then close lid and press START/Pause/Unlock Lid to restart the cycle. If you need to open the lid to add a garment after this point, you must press START/Pause/ Unlock Lid and wait for the lid to unlock. This may take several minutes if the load was spinning at a high speed. You may hear a winding sound as the basket slows down. Then add garment, close lid, and press START/Pause/Unlock Lid again to resume the cycle.

NOTES:

■ Washer will ll with the lid open.

■ If your washer does not have a soak option, then pause

your washer to soak. When you are done soaking then press Start/Pause button to bring washer out of Pause.

IMPORTANT: If lid is left open for more than 10 minutes, the water will pump out automatically.

9. Manually add fabric softener to

dispenser

During the nal rinse, wait until the washer has completed lling, press the START/Pause button to pause the

washer. Lift the lid and add the measured recommended amount of liquid fabric softener. Do not use more than the recommended amount. Close the lid and press the START/ Pause button again to start the washer.

WATER INLET HOSES

Replace inlet hoses after 5 years of use to reduce the risk of

hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear, or leaks are found.

When replacing your inlet hoses, mark the date of replacement on the label with a permanent marker.

NOTE: This washer does not include inlet hoses. See the “Installation Instructions” for more information.

WASHER CARE

Recommendations to Help Keep Your Washer Clean and Performing at its Best

1. Always follow the detergent manufacturer’s instructions

regarding the amount of detergent to use. Never use more than the recommended amount because that may increase the rate at which detergent and soil residue accumulate inside your washer, which in turn may result in undesirable odor.

2. Use warm and hot wash water settings sometimes (not

exclusively cold water washes), because they do a better

job of controlling the rate at which soils and detergent accumulate.

3. Always leave the washer lid open between uses to help dry

out the washer and prevent the buildup of odor-causing residue.

Cleaning Your Top Loading Washer

Read these instructions completely before beginning the routine cleaning processes recommended below. This Washer Maintenance Procedure should be performed, at a minimum, once per month or every 30 wash cycles, whichever occurs sooner, to control the rate at which soils and detergent may otherwise accumulate in your washer.

Cleaning the Inside of the Washer

To keep your washer odor-free, follow the usage instructions provided above, and use this recommended monthly cleaning procedure:

Recommended Cycle for Cleaning the Washer

Refer to the “Cycle Guide” for the optimal cycle for cleaning the inside of the washer. Use this cycle with affresh® Washer Cleaner or liquid chlorine bleach as described below.

Begin procedure

1. affresh® Washer Cleaner Cycle Procedure (Recommended

for Best Performance):

a. Open the washer lid and remove any clothing or items. b. Place an affresh® Washer Cleaner tablet in the bottom of

the washer basket.

c. Do not place an affresh® Washer Cleaner tablet in the

detergent dispenser.

d. Do not add any detergent or other chemical to the washer

when following this procedure.

e. Close the washer lid. f. Select the cycle recommended for cleaning the inside

of the washer.

g. Press the START/Pause button to start the cycle.

NOTE: For best results, do not interrupt cycle. If cycle must

be interrupted, press START/Pause once. After the cycle has stopped, run a RINSE & SPIN cycle to rinse cleaner from washer.

WASHER CARE (cont.)

2. Chlorine Bleach Procedure (Alternative): a. Open the washer lid and remove any clothing or items. b. Add 1 cup (236 mL) of liquid chlorine bleach to the bleach

compartment.

NOTE: Use of more liquid chlorine bleach than is recommended above could cause washer damage over time.

c. Close the washer lid. d. Do not add any detergent or other chemical to the washer

when following this procedure.

e. Select the cycle recommended for cleaning the inside of

the washer.

f. Press the START/Pause button to start the cycle. NOTE: For best results, do not interrupt cycle. If cycle must

be interrupted, press START/Pause once. After the cycle has stopped, run a RINSE & SPIN cycle to rinse cleaner from washer.

Cleaning the Dispensers

After a period of using your washer, you may nd some

residue buildup in the washer’s dispensers. To remove residue from the dispensers, wipe them with a damp cloth and towel dry. Do not attempt to remove the dispensers or trim for cleaning. The dispensers and trim are not removable. If your model has a dispenser drawer, however, remove the drawer and clean it before or after you run the Clean Washer cycle. Use an all-purpose surface cleaner, if needed.

Cleaning the Outside of the Washer

Use a soft, damp cloth or sponge to wipe away any spills. Use only mild soaps or cleaners when cleaning external washer surfaces.

IMPORTANT: To avoid damaging the washer’s nish, do not

use abrasive products.

TRANSPORTING YOUR WASHER

1. Shut off both water faucets. Disconnect and drain water

inlet hoses.

2. If washer will be moved during freezing weather, follow

Winter Storage Care directions before moving.

3. Disconnect drain hose from drain system and drain any

remaining water into a pan or bucket. Disconnect drain hose from back of washer.

4. Unplug power cord.

5. Place inlet hoses and drain hose inside washer basket.

6. Drape power cord over edge and into washer basket.

7. Place packing tray from original shipping materials back

inside washer. If you do not have packing tray, place heavy blankets or towels into basket opening. Close lid and place tape over lid and down front of washer. Keep lid taped until washer is placed in new location. Transport washer in upright position.

REINSTALLING/USING WASHER AGAIN

To reinstall washer after non-use, vacation, winter storage, or moving:

1. Refer to “Installation Instructions” to locate, level, and

connect washer.

2. Before using again, run washer through the following

recommended procedure:

To use washer again:

1. Flush water pipes and hoses. Reconnect water inlet hoses.

Turn on both water faucets.

WARNING

NON-USE AND VACATION CARE

Operate your washer only when you are home. If moving, or not using your washer for a period of time, follow these steps:

1. Unplug or disconnect power to washer.

2. Turn off water supply to washer, to avoid ooding due

to water pressure surge.

WINTER STORAGE CARE

IMPORTANT: To avoid damage, install and store washer

where it will not freeze. Because some water may stay in hoses, freezing can damage washer. If storing or moving during freezing weather, winterize your washer.

To winterize washer:

1. Shut off both water faucets; disconnect and drain water

inlet hoses.

2. Put 1 qt. (1 L) of R.V.-type antifreeze in basket and run

washer on RINSE & SPIN cycle for about 30 seconds to mix antifreeze and remaining water.

3. Unplug washer or disconnect power.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, re, or electrical shock.

2. Plug in washer or reconnect power.

3. Run washer through Clean Washer with affresh® cycle to

clean washer and remove antifreeze, if used. Use half the manufacturer’s recommended amount of detergent for a medium-size load.

Troubleshooting

First try the solutions suggested here or visit our website at www.amana.com -

In Canada www.amanacanada.ca for assistance and to possibly avoid a service call.

If you experience Possible Causes Solution

Vibration or Off-Balance

Check the following for proper installation or see “Using Your Washer” section.

Noises

Clicking or metallic noises

Gurgling or humming Washer may be draining water. It is normal to hear the pump making a continuous humming

Humming Load sensing may be occurring. You may hear the hum of the sensing spins after you have

Water Leaks

Check the following for proper installation:

Washer not performing as expected

Not enough water in washer

Feet may not be in contact with the

oor and locked.

Washer may not be level. Check oor for exing or sagging. If ooring is uneven, a 3/4"

Load could be unbalanced. Load dry items in loose heaps evenly around basket wall.

Objects caught in washer drain system.

Washer not level. Water may splash off basket if washer is not level. Check that

Fill hoses not attached tightly. Tighten ll-hose connection. Fill hose washers. Make sure all four ll hose at washers are properly seated. Drain hose connection. Pull drain hose from washer cabinet and properly secure it to

Check household plumbing for leaks or clogged sink or drain.

Washer not loaded as recommended.

Load not completely covered in water.

Front and rear feet must be in rm contact with oor, and washer must be level to operate properly.

(19 mm) piece of plywood under your washer will reduce sound.

See “Level the Washer” in Installation Instructions.

Adding wet items to washer or adding more water to basket could unbalance washer.

Wash smaller loads to reduce imbalance. Do not tightly pack. Avoid washing single items. Use Bulky Items cycle for oversized, non-absorbent items such

as jackets and small comforters. See “Cycle Guide”. See “Cycle Guide” and “Using Your Washer” in this Use and

Care Guide.

Empty pockets before washing. Loose items such as coins could fall between basket and tub or may block pump. It may be necessary to call for service to remove items.

It is normal to hear metal items on clothing such as metal snaps, buckles, or zippers touch against the basket.

sound with periodic gurgling or surging as nal amounts of water are removed during the Drain/Spin cycles.

started the washer. This is normal.

load is not unbalanced or tightly packed.

drainpipe or laundry tub. Do not place tape over drain opening. Water can back up out of a clogged sink or drainpipe. Check all

household plumbing for leaks (laundry tubs, drain pipe, water pipes, and faucets.)

Improper loading can cause basket to be out of alignment and cause water to splash off tub. See “Using Your Washer” for loading instructions.

This is normal operation for an HE low-water washer. The load will not be completely under water. The washer senses load sizes and adds correct amount of water for optimal cleaning.

IMPORTANT: Do not add more water to washer. Adding water lifts the items off the washplate, resulting in less effective cleaning.

Use Bulky Items or Deep Water Wash cycle for higher water ll.

See “What’s New under the Lid” and “Cycle Guide” to match your load with the best cycle.

Run Clean Washer with affresh® cycle to optimize the water level and wash performance due to soil build-up in washer basket.

+ 25 hidden pages