Amana NED7500VM1, NED7500VW1, NGD7500VW1, NGD7500VM1 Owner’s Manual
r®
ELECTRONIC
DRYER
FOR QUESTIONS ABOUT FEATURES,
OPERATION/PERFORMANCE, PARTS, ACCESSORIES,
OR SERVICE, CALL: 1-800-843-0304
OR VISIT OUR WEBSITE AT... WWW.AMANA.COM
IN CANADA, CALL: 1.800.807.6777
OR VISIT OUR WEBSITE AT WWW.AMANACANADA.COM
Quick Start Guide/Dryer Use ............ pg. 5
_BLE OF N?_F_bt_
Page
ASSISTANCE OR SERVICE ........................................................... 2
DRYER SAFETY .............................................................................. 3
QUICK START GUIDE/DRYER USE ............................................. 5
Drying and Cycle Tips .................................................................. 7
Cycles ........................................................................................... 7
Additional Features ...................................................................... 8
Options ......................................................................................... 9
Modifiers ....................................................................................... 9
Changing Cycles, Options, and Modifiers ................................... 9
Control Locked ........................................................................... 10
End of Cycle Signal .................................................................... 10
Drying Rack Options .................................................................. 10
DRYER CARE ............................................................................... 11
Cleaning the Dryer Location ...................................................... 11
Cleaning the Lint Screen ............................................................ 11
Cleaning the Dryer Interior ......................................................... 11
Removing Accumulated Lint ...................................................... 11
Vacation and Moving Care ......................................................... 11
Changing the Drum Light ........................................................... 12
TROUBLESHOOTING .................................................................. 13
Dryer Operation .......................................................................... 13
Dryer Results .............................................................................. 14
WAR RANTY .................................................................................. 15
SECHEUSE
P
ELECTRONIQUE
#!It Tt'_S__ _"" ........ '_ '_"_.......'_"_''_,°T:'_'_.....•...... -,-_,_,,_
AU CANADA, POUR ASSISTANCE, INSTALLATION,
Guide de Ddmarrage Rapide/Utilisation
ASSISTANC EOU SERVICE ......................................................... 16
SI_CURITI_ DE LA SI_CHEUSE .................................................... 17
GUIDE DE DI_MARRAGE RAPIDE/
UTILISATION DE LA SI_CHEUSE ................................................ 19
Conseils pour le sechage et les programmes ........................... 21
Programmes ............................................................................... 21
Caracteristiques supplementaires ............................................. 23
Options ....................................................................................... 23
Modificateurs .............................................................................. 24
Changement des programmes, options et modificateurs ......... 24
Control Locked (commande verrouillee) .................................... 24
Signal de fin de programme ....................................................... 24
Options de grille de sechage ..................................................... 25
ENTRETIEN DE LA SI_CHEUSE .................................................. 26
Nettoyage de I'emplacement de la secheuse ........................... 26
Nettoyage du filtre & charpie ...................................................... 26
Nettoyage de I'interieur de la secheuse ..................................... 26
Retrait de la charpie accumulee ................................................ 26
Precautions & prendre pour les vacances
et avant un demenagement ....................................................... 27
Changement de I'ampoule d'eclairage du tambour .................. 27
DlePANNAGE ................................................................................. 28
Fonctionnement de la secheuse ................................................ 28
Resultats de lasecheuse ........................................................... 29
GARANTIE .................................................................................... 31
OU SERVICE, COMPOSEZ LE :
1-800-807-6777
OU VISITEZ NOTRE SITE INTERNET A..
WWW.AMANACANADA.COM
de la sdcheuse .... pg. 19
Page
W10239303A
ASSISTANCEOR SERVICE
Before calling for assistance or service, please check "Troubleshooting." It may save you the cost of a service call. If you still need help,
follow the instructions below.
When calling, please know the purchase date and the complete model and serial number of your appliance. This information will help us
to better respond to your request.
If you need replacement parts
If you need to order replacement parts, we recommend that you use only factory specified parts. Factory specified parts will fit right and
work right because they are made with the same precision used to build every new AMANA _ appliance.
To locate factory specified parts in your area, call the following customer assistance telephone number or your nearest designated
service center.
Call Amana _ toll free: 1-800-843-0304, or visit our website at
www.amana.com/help
Our consultants provide assistance with:
• Features and specifications on our full line of appliances.
• Installation information.
• Use and maintenance procedures.
• Accessory and repair parts sales.
• Specialized customer assistance (Spanish speaking, hearing
impaired, limited vision, etc.).
• Referrals to local dealers, repair parts distributors and service
companies. Amana _ appliances designated service
technicians are trained to fulfill the product warranty and
provide after-warranty service, anywhere in the United States.
• To locate the Amana C_appliances designated service
company in your area, you can also look in your telephone
directory Yellow Pages.
For further assistance
If you need further assistance, you can write to Amana _
appliances with any questions or concerns at:
Amana Services, LLC
A-I-I-N:CAIR<_Center
P.O. Box 2370
Cleveland, TN 37320-2370
Please include a daytime phone number in your correspondence.
Call the Whirlpool Canada LP Customer Interaction Centre toll
free: 1-800-807-6777, or visit our website at
www.amanacanada.com.
Our consultants provide assistance with:
• Features and specifications on our full line of appliances.
• Use and maintenance procedures.
• Accessory and repair parts sales.
• Referrals to local dealers, repair parts distributors, and
service companies. Whirlpool Canada LP designated service
technicians are trained to fulfill the product warranty and
provide after-warranty service, anywhere in Canada.
For further assistance
If you need further assistance, you can write to Whirlpool Canada
LP with any questions or concerns at:
Customer Interaction Centre
Whirlpool Canada LP
1901 Minnesota Court
Mississauga, Ontario L5N 3A7
Please include a daytime phone number inyour correspondence.
2
DRYERSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediatel_
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
WARNING - "Risk of Fire"
- Clothes dryer installation must be performed by a qualified installer,
- Install the clothes dryer according to the manufacturer's instructions and local codes.
- Do not install a clothes dryer with flexible plastic venting materials, if flexible metal
(foil type) duct is installed, it must be of a specific type identified by the appliance
manufacturer as suitable for use with clothes dryers. Flexible venting materials are
known to collapse, be easily crushed, and trap lint. These conditions will obstruct
clothes dryer airflow and increase the risk of fire.
- To reduce the risk of severe injury or death, follow all installation instructions.
- Save these instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the dryer, follow basic precautions,
including the following:
[] Read all instructions before using the dryer.
[] Do not place items exposed to cooking oils in your dryer.
Items contaminated with cooking oils may contribute to
a chemical reaction that could cause a load to catch fire.
[] Do not dry articles that have been previously cleaned in,
washed in, soaked in, or spotted with gasoline, dry=
cleaning solvents, or other flammable or explosive
substances as they give off vapors that could ignite or
explode.
[] Do not allow children to play on or in the dryer. Close
supervision of children is necessary when the dryer is
used near children.
[] Before the dryer is removed from service or discarded,
remove the door to the drying compartment.
[] Do not reach into the dryer if the drum is moving.
[] Do not install or store the dryer where it will be exposed
to the weather.
[] Do not tamper with controls.
SAVE THESE INSTRUCTIONS
[] Do not repair or replace any part of the dryer or attempt
any servicing unless specifically recommended in this
Use and Care Guide or in published user-repair
instructions that you understand and have the skills to
carry out.
[] Do not use fabric softeners or products to eliminate static
unless recommended by the manufacturer of the fabric
softener or product.
[] Do not use heat to dry articles containing foam rubber or
similarly textured rubber=like materials.
[] Clean lint screen before or after each load.
[] Keep area around the inlet opening at the rear of the
dryer, exhaust opening and adjacent surrounding areas,
free from the accumulation of lint, dust, and dirt.
[] The interior of the dryer should be cleaned periodically
by qualified service personnel.
[] See installation instructions for grounding requirements.
IMPORTANT: The gas installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas
Code, ANSI Z223.1/NFPA 54.
The dryer must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National
Electrical Code, ANSI/NFPA 70.
WARNING: For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, or to prevent property damage, personal injury, or death.
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this
or any other appliance.
- WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Clear the room, building, or area of all occupants.
• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
instructions.
• If you cannot reach your gas supplier, call the fire department.
= Installation and service must be performed by a qualified installer, service agency, or
the gas supplier.
WARNING: Gas leaks cannot always be detected by smell.
Gas suppliers recommend that you use a gas detector approved by UL or CSA.
For more information, contact your gas supplier.
If a gas leak is detected, follow the "What to do if you smell gas" instructions.
4
In the State of Massachusetts, the following installation instructions apply:
m Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by
the State of Massachusetts.
m If using a ball valve, it shall be a T-handle type.
m A flexible gas connector, when used, must not exceed 3 feet.
State of California Proposition 65 Warnings:
WARNING: This product contains a chemical known to the State of California to cause cancer.
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
QUICK STARTGUIDE/DRYER USE
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils}.
items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.
For a summary of how to use your washer following installation, see the QUICK START GUIDE on the next page.
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to foflow these instructions can result in death,
explosion, or fire.
Explosion Hazard
QUICKSTARTGUIDE
NOTE:The panel andfeatures shown may be different from that of your model.
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS
before operating this appliance. The following is a guide to using your dryer. Please refer to specific sections of this
manual for more detailed information.
'I_'__ i__ ..... _ %y_::_ _y_'_
Select the correct cycle and dryness level or temperature for your
load. If an Automatic Cycle is running, the display shows the
estimated cycle time, which is determined by your dryer
automatically sensing the dryness level of your load. If a Timed
Cycle is running, the display shows the exact number of minutes
remaining in the cycle.
Cool Down tumbles the load without heat during the last few
minutes of all cycles. Cool Down makes the loads easier to
handle and reduces wrinkling. The length of the Cool Down
depends on the load size and dryness level.
Drying tips
• Follow care label directions when they are available.
• If desired, add a fabric softener sheet. Follow package
instructions.
• To reduce wrinkling, remove the load from the dryer as soon
as tumbling stops. This is especially important for permanent
press, knits, and synthetic fabrics.
• Avoid drying heavy work clothes together with lighter fabrics.
This could cause overdrying of lighter fabrics and lead to
increased shrinkage or wrinkling.
Cycle tips
• Drymost loads using the preset cycle settings.
• Refer to the Automatic or Timed Cycles Preset Settings chart
(in the "Cycles" section) for a guide to drying various loads.
Drying temperature and Dryness Level are preset when
you choose an Automatic Cycle. You can select a
different dryness level, depending on your load, by
pressing Dryness Level and choosing More Dry, Normal,
or Less Dry.
NOTE: You cannot use the Timed Cycle Adjust and you
cannot modify temperature with the Automatic cycles.
If you wish to adjust the cycle length of a Timed Cycle,
press More Time or Less Time. Adjust the temperature of
a Timed Cycle by pressing TEMPERATURE until the
desired temperature is selected.
NOTE: You cannot use the Dryness Level with Timed
Cycles.
Select the drying cycle that matches the type of load you are
drying. See Automatic Dry chart or Timed Preset Cycle Settings
chart.
Power TIMED CYCLES
0 NePmal=
Timed Dry Heavy Duty.
Quick Dry
Denim
Delicate
Air Fluff
TIMEDCYCE
0
Touch Up
Automatic Cycles
Automatic Cycles allow you to match the cycle to the load you
are drying. See the following Automatic Dry Preset Cycle Settings
chart. Each cycle dries certain fabrics at the recommended
temperature. A sensor detects the moisture in the load and
automatically adjusts the drying time for optimal drying.
Heavy Duty
Use this cycle to get high heat for heavyweight mixed loads,
cotton towels, or bedspreads.
Denim
Use this cycle to get medium high heat for drying denims.
Normal
Use this cycle to get medium heat for drying sturdy fabrics such
as work clothes and sheets.
Casual
Use this
as sport
blends.
Delicate
Use this cycle to get extra-low heat to gently dry items such as
lingerie, blouses, or washable knit fabrics.
Automatic Dry Preset Cycle Settings
Automatic Cycles Temperature Time*
Load Type (Minutes)
HEAVY DUTY High 45
Heavyweight mixed loads,
cotton towels, bedspreads
DENIM Medium High 55
Denim jeans, jackets
NORMAL Medium 40
Corduroys, work clothes,
sheets
CASUAL Low 35
Permanent press,
synthetics
DELICATE Extra Low 30
Lingerie, blouses, washable
knit fabrics
*Estimated Time with Dryness Level (Normal) setting. Time will
vary depending on load type and load size.
NOTE: Most loads may be dried using Normal dryness level,
which is shown in bold letters on your control panel. Normal is
the energy preferred dryness level and will use the least energy.
Use Timed Cycles to select a specific amount of drying time and
a drying temperature. Press TEMPERATURE until the desired
temperature glows. (Temperatures are not selectable with Air
Fluff.) When a Timed Cycle is selected, the Estimated Time
Remaining display shows the actual time remaining in your cycle.
You can change the actual time in the cycle by pressing More
Time or Less Time. See "Changing Cycles, Options, and
Modifiers."
NOTE: During a Timed Cycle, you can change the settings for
Time, Temperature, Wrinkle Prevent, and End of Cycle Signal.
Press STOP twice to stop the dryer and clear the settings. Select
another cycle or option.
Timed Dry
Use this cycle to complete drying if items are still damp after an
Automatic Cycle. Timed Dry is also useful for drying heavyweight
and bulky items, such as bedspreads and work clothes.
Lightweight garments, such as exercise wear, can be dried using
Timed Dry on a low temperature setting.
cycle to get low heat for drying no-iron fabrics, such
shirts, casual business clothes, and permanent press
Timed Cycles
Quick Dry
Use this cycle for drying small loads or loads that need a short
drying time.
Touch Up
Use this cycle to help smooth out wrinkles from items, such as
clothes packed in a suitcase or items wrinkled from being left in
the dryer too long.
Air Fluff
Rotate the dial to Air Fluff to use this cycle for items that require
drying without heat such as rubber, plastic, and heat-sensitive
fabrics. This table shows examples of items that can be dried
using Air Fluff. The temperature setting is not adjustable with
this cycle.
Type of Load Time*
(Minutes)
Foam rubber - pillows, padded bras, stuffed toys 20 - 30
Plastic - Shower curtains, tablecloths 20 - 30
Rubber-backed rugs 40 - 50
Olefin, polypropylene, sheer nylon 10 - 20
*Reset cycle to complete drying, if needed.
When using Air Fluff
• Check that coverings are securely stitched.
• Shake and fluff pillows by hand periodically during the cycle.
• Dry item completely. Foam rubber pillows are slow to dry.
Timed Preset Cycle Settings
Timed Cycles Default Default Time
Load Type Temperature (Minutes)
TIMED DRY High 40
Heavyweight, bulky items,
bedspreads, work clothes
QUICK DRY High 23
Small loads
TOUCH UP Medium High 20
Helps to smooth out
wrinkles
AIR FLUFF Air Dry 36
Dry without heat (no heat)
*Use the Air Fluff cycle for items that require drying without heat
such as rubber, plastic, and heat-sensitive fabrics.
MODIFIERS
Adjust
t-°l©
0 0 °L,o..,,..O
Timed Cycle
TheTimed Cycle light glows green during a Timed Cycle.
Wet
The Wet light glows green at the beginning of Automatic Cycle if
a wet item is detected or in a timed cycle after 5 minutes.
• In an Automatic Cycle, if a wet item is not detected after
5 minutes, the dryer will run for a preset minimum run time
(based on the selected cycle and dryness level setting) and
then go into Cool Down. The Cool Down and Wrinkle Prevent
indicators will glow green, if selected.
• In aTimed Cycle, the Wet light will glow green after 5 minutes
and remain on until the dryer enters Cool Down.
Damp
The Damp light glows green in an Automatic Cycle when the
laundry is approximately 80% dry. This is useful when you want
to remove lightweight items in a mixed load to avoid overdrying
or remove partially dry items that may need ironing. To be alerted
when the load is about 80% dry, you may use the damp dry
signal option. See Damp Dry Signal in "Options."
Cool Down
The Cool Down light glows green during the cool down part of
the cycle. Laundry cools for ease in handling.
Clothes Dry
The Clothes Dry light glows green when the drying cycle is
finished. This indicator stays on during Wrinkle Prevent.
Wrinkle Prevent
The Wrinkle Prevent light glows green when this option is
selected. This indicator stays on with Clothes Dry.
Sensing/Revising Est. Time
The Sensing/Revising Est. Time light glows green when moisture
sensing strips in the dryer drum are measuring the amount of
moisture in the clothes. The estimated time display may adjust
to show a more accurate drying time.
Indicator lights
Other indicator lights show Cycle, Options, Modifiers, End of
Cycle, and Control Lock settings selected. The display shows
the estimated or actual time remaining.
Youcancustomizeyourcyclesbyselectingoptions.Notall
Optionsareavailablewithallcycles.Currentselectionswillglow
green.Ifanoptionisunavailablewithaselectedcycle,thelight
willnotilluminatewhenpressedandanerrorsoundwillbeheard.
Wrinkle Prevent
Wrinkle Prevent helps smooth out wrinkles that form when you
cannot unload the dryer promptly at the end of a cycle. During
this option, the dryer stops tumbling and then tumbles again for
a brief period.
• Press WRINKLE PREVENT to get up to 2 hours of heat-free,
periodic tumbling at the end of a cycle.
• Stop Wrinkle Prevent at any time by pressing WRINKLE
PREVENT or opening the dryer door.
• For the Casual cycle, Wrinkle Prevent is preset to ON.
The other cycles will retain the Wrinkle Prevent setting.
For example, if you select Wrinkle Prevent in the Normal
cycle, Wrinkle Prevent will be on the next time you select the
Normal cycle.
NOTE: If you do not select Wrinkle Prevent, the dryer stops
after cool down.
Damp Dry Signal
Select the Damp Dry Signal to alert you that your clothes are
approximately 80% dry. This is useful when you want to remove
lightweight items in a mixed load to avoid overdrying or remove
partially dry items that may need ironing.
NOTE: The Damp Dry Signal is available only with the Automatic
Cycles.
Button Sounds
You can change the volume of the sound of the beeps. Press
BU-i-i-ON SOUNDS until the desired volume (Loud, Soft, or Off)
glows. The Power and Cancel buttons will still beep softly when
the Button Sounds volume is set to Off.
Drum Light
Press DRUM LIGHT to turn on the light inside the dryer drum.
During a cycle, if Drum Light is selected, the drum light turns on
and will remain on until Drum Light is pressed again, the door is
open and closed, or the door is left open for 5 minutes.
When the dryer is not running, the drum light will turn on when
Drum Light is pressed or the dryer door is opened, and it will
remain on until the dryer door has been open for 5 minutes, the
dryer door is closed or Drum Light is pressed again.
Press DRUM LIGHT at any time to turn the drum light ON or OFF.
Use Modifiers to select time, temperatures, and dryness levels for
the Timed Cycles. Not all Modifiers are available with all options
and cycles. Available modifier settings will glow amber. Current
selections will glow green. If a modifier is unavailable with a
selected cycle, the light will not illuminate.
Time
Press MORE TIME or LESS TIME until the desired drying time is
displayed. The time cannot be changed with Automatic Cycles.
Temperature
Press TEMPERATURE until the desired temperature setting
glows. Temperature modifiers cannot be used with the Automatic
Cycles or the Air Fluff cycle.
Dryness Level
Press DRYNESS LEVEL until the desired Dryness Level is
selected. Dryness Level cannot be adjusted with Timed Cycles.
_'_Y_ <sJ _ _ '_ ............_ _,x _,,_..........
You can change Automatic Cycles, Timed Cycles, Modifiers, and
Options anytime before pressing Start.
• Three short tones sound if an unavailable combination is
selected. The last selection will not be accepted.
Changing Cycles after pressing Start
1. Press STOP twice. This ends the current cycle.
2. Select the desired cycle and options.
3. Press and hold START. The dryer starts at the beginning of
the new cycle.
NOTE: If you do not press START within 5 minutes of selecting
the cycle, the dryer automatically shuts off.
Changing Modifiers and Options after pressing Start
You can change a Modifier or Option anytime before the selected
Modifier or Option begins.
1. Press STOP once.
2. Select the new Modifier and/or Option.
3. Press and hold START to continue the cycle.
NOTE: If you happen to press Stop twice, the program clears and
your dryer shuts down. Restart the selection process.
Changing the Preset Dryness Level Settings
If all of your loads on all Automatic Dry cycles are consistently not
as dry as you would like, you may change the preset Dryness
Level settings to increase the dryness. This change will affect all
of your Automatic Dry cycles.
Your Dryness Level settings can be adjusted to adapt to different
installations, environmental conditions or personal preference.
There are 3 drying settings: 1 (factory preset dryness level),
2 (slightly dryer clothes, approximately 15% more drying time),
and 3 (much dryer clothes, approximately 30% more drying
time).
1. The Dryness Level settings cannot be changed while the
dryer is running.
2. Press and hold the DRYNESS LEVEL button for 5 seconds.
The dryer will beep, and "CF" will be displayed for 1 second
followed by the current drying setting.
3. To select a new drying setting, press the DRYNESS LEVEL
button again until the desired drying setting is shown.
NOTE: While you are cycling through the settings, the current
setting will not flash, but the other settings will flash.
4. PressSTARTtosavethedryingsetting.
Thedryingsettingyouselectedwillbecomeyournewpreset
dryingsettingforallAutomaticDrycycles.
Thisfeatureallowsyoutolockyoursettingstoavoidunintended
useofthedryer.YoucanalsousetheControlLockedfeatureto
avoidunintendedcycleoroptionchangesduringdryeroperation.
To enable the Control Locked feature:
Press and hold CYCLE SIGNAL for 3 seconds. The LocWUnlock
Controls indicator light glows, and a single beep tone is heard.
To unlock, press and hold CYCLE SIGNAL for 3 seconds.
The indicator light turns off.
01)%,,,,,,SgnGl
End of Cycle Signal
The End of Cycle Signal produces an audible sound when the
drying cycle is finished. Promptly removing clothes at the end
of the cycle reduces wrinkling.
2. Place drying rack over the bottom of the dryer door opening.
Rest the back wire on the dryer back ledge. Push down on
the frame front to secure over lint screen.
B
A. Drying rack front edge
B. Dryer back panel
3.
Place wet items on top of the drying rack. Allow space
around items for air to circulate. The drying rack does not
move, but the drum will rotate. Make sure items do not hang
over the edges or between drying rack grille.
°O
L ,o2,si 24
UNLOCK CONTROL8
Press CYCLE SIGNAL to adjust the sound level or turn off the
signal.
NOTE: When Wrinkle Prevent is selected and the End of Cycle
Signal is on, a tone sounds every 5 minutes until the clothes are
removed, or Wrinkle Prevent ends.
The drying rack is useful for drying items you would not
necessarily want to tumble dry or that you would normally line dry
(for example, sweaters).
If your model does not have a drying rack, you may be able to
purchase one for your model. To find out whether your model
allows drying rack usage and for information on ordering, please
refer to the front page of the manual or contact the dealer from
whom you purchased your dryer.
The drying rack is recommended for use with the Air Fluff cycle or
with Timed Dry cycles. The drying rack cannot be used with
Automatic Cycles.
To use the heated drying rack:
Do not remove the lint screen.
1. Open dryer door.
4. Close the door.
5. Rotate the dial to the Air Fluff cycle or press Timed Dry.
Select a drying time by pressing MORE TIME or LESS TIME.
Press TEMPERATURE until the desired temperature glows.
Items containing foam, rubber, or plastic must be dried on a
clothesline or by using the Air Fluff cycle. Refer to the
following table.
6. When Air Fluff is selected, the Estimated Time Remaining
display shows the default time. You can change the actual
time in the cycle by pressing More Time or Less Time.
7. Start the dryer.
NOTE: Check the lint screen and remove any lint accumulated
from items dried on the drying rack after the cycle is finished.
Drying Rack Cycle Temp. Time*
Wool Sweaters Timed Dry Low 60
Block to shape and lay flat
on the drying rack
Stuffed toys or pillows Timed Dry Low 60
Cotton or polyester fiber
filled
Stuffed toys or pillows Air Fluff Air Only 90
Foam rubber filled (no heat)
Sneakers or canvas Air Fluff Air Only 90
shoes (no heat)
10
A. Front edge
*Reset cycle to complete drying if needed.
NOTE: You must remove drying rack for normal tumbling. To
A
remove the drying rack, lift it straight up and out of the dryer.
Loading...