Amana ADB1500ADB2, ADB1500ADS1, ADB1500ADS3, ADB1500ADW2, ADB1700ADS1 Owner’s Manual

THANKYOUforpurchasingthishigh-qualityproduct.Registeryourdishwasheratwww.amana.com.InCanada,visitourwebsite
atwww.amanacanada.ca.

For future reference please make a note of your product model and serial numbers. These can be located near the door on the right-hand

or left-hand side of the dishwasher interior.

Model Number Serial Number

Table of Contents

DISHWASHER SAFETY ............................................................. 1

WHAT'S NEW IN YOUR DISHWASHER ................................... 3

QUICK STEPS ............................................................................ 4

DISHWASHER USE .................................................................... 5

CYCLE AND OPTION DESCRIPTIONS .................................... 7

FILTRATION SYSTEM ............................................................... 9

DISHWASHER CARE ............................................................... 10

TROUBLESHOOTING .............................................................. 11

WARRANTY .............................................................................. 13

DislhwasllBe_ Sa{ety

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately
follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

W10708664A

iMPORTANT SAFETY iNSTRUCTiONS

WARNING: When using the dishwasher, follow basic precautions, including the following:

[] Read all instructions before using the dishwasher. [] Do not tamper with controls.
[] Use the dishwasher only for its intended function.
[] Use only detergents or rinse agents recommended for use in

a dishwasher, and keep them out of the reach of children.

[] When loading items to be washed:

1) Locate sharp items so that they are not likely to damage
the door seal; and

2) Load sharp knives with the handles up to reduce the risk
of cut-type injuries.

[] Do not wash plastic items unless they are marked

"dishwasher safe" or the equivalent. For plastic items not so

marked, check the manufacturer's recommendations.

[] Do not touch the heating element during or immediately after

use.

[] Do not operate the dishwasher unless all enclosure panels

are properly in place.

[] Do not abuse, sit on, or stand on the door, lid, or dish racks

of the dishwasher.

[] To reduce the risk of injury, do not allow children to play in

or on the dishwasher.

[] Under certain conditions, hydrogen gas may be produced in

a hot water system that has not been used for two weeks or
more. HYDROGEN GAS IS EXPLOSIVE. If the hot water

system has not been used for such a period, before using
the dishwasher turn on all hot water faucets and let the

water flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is flammable,

do not smoke or use an open flame during this time.

[] Remove the door or lid to the washing compartment

when removing an old dishwasher from service or
discarding it.

SAVE THESE iNSTRUCTiONS

GROUNDING iNSTRUCTiONS

For a grounded, cord-connected dishwasher:

The dishwasher must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the risk of
electric shock by providing a path of least resistance for
electric current. The dishwasher is equipped with a cord
having an equipment-grounding conductor and a grounding

plug. The plug must be plugged into an appropriate outlet

that is installed and grounded in accordance with all local
codes and ordinances.

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

Check with a qualified electrician or service representative

if you are in doubt whether the dishwasher is properly

grounded. Do not modify the plug provided with the
dishwasher; if it will not fit the outlet, have a proper outlet

installed by a qualified electrician.

[]

For a permanently connected dishwasher:

The dishwasher must be connected to a grounded metal,

permanent wiring system, or an equipment-grounding

conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on

the dishwasher.

SAVE THESE iNSTRUCTiONS

Tip Over Hazard
Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.

State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

WlBat s N@w ill sYo lr OislBwaslB@

Congratulations on purchasing your water and energy efficient dishwasher! This dishwasher cleans by spraying the
dishes with water and pauses to allow the detergent to soak into and release the soils on the dishes. The cycles are

longer due to the soak and pauses for exceptional cleaning. Several models contain an optical water sensor. The
optical water sensor is used to determine the optimum water and energy consumption for great cleaning

performance. Efficient dishwashers run longer to save water and energy, just as driving a car slower saves on gas.
The first cycle using the sensor will run longer to calibrate the optical sensor.

Using rinse aid will optimize your drying and wash
performance. This dishwasher is specifically designed to be

used with rinse aid for improved drying performance and
controlling buildup of hard water deposits. Energy efficient

dishwashers use less water and energy, so they depend on the
water "sheeting" action of rinse aid for total optimal

performance.

Detergent (Dispenser varies by model)

The United States and Canada have passed a restriction

limiting the amount of phosphorus (phosphates) in the ..... _,

household dishwasher detergents to no more than 0.5%, \
where previous detergents contained 8.7%. Major
manufacturers have reformulated their dishwasher detergent

for this change in detergents as another step in eco-conscious
awareness. With these recent changes, it is recommended to \

use tablets and packs for convenience and improved
performance.

Your dishwasher has the latest technology in dishwasher
filtration. This triple filtration system minimizes sound and

optimizes water and energy conservation while providing
optimal cleaning performance. Maintenance of your filters

regularly will sustain peak cleaning performance. We suggest
you clean both your upper and lower filter and rinse under

running water at least once a month.

\

Quidk Steps

Prepare and load _
dishwasher.

Spin the spray
arms. They

should turn
freely.

Add detergent and rinse aid. (Dispenser varies by
model.)

Start dishwasher.
For models with controls

on top of the door, select

wash cycle, option and

press START/R ESUME
before closing the door.

Push door firmly closed.

The door latches

automatically. For
models with front

controls, select the wash
cycle, options and press

START/RESUME or
press START/R ESUM E

to repeat the same cycle

and options as in the
previous wash cycle.

_i_ Unload and clean

_J the filter.

See "Recommended

Time Interval to Clean
Your Filter," in the

"Filtration System"

section for the

recommended cleaning

schedule.

@

DRAIN

CANCEL

HOLD 3 SEC

Locating tab

Select a cycle and option (cycles and options vary

by model).

SoiISense HEAVY NORMAL LIGHT 1 HOUR DELAY

@ @ @ @ @ @

SELECTCYCLE

SANI RINSE HI TEMP LIGHT DRY HEATED DRY

-- HOLD 3 SEC
TO LOCK

HOLD 3 SEC

Dishwasher Use

STEP1 •

Prepare and Load the Dishwasher

IMPORTANT: Remove leftover food, bones, toothpicks and other •

hard items from the dishes. Remove labels from containers before •
washing.

8-Place Setting loading pattern •

Items should be loaded with soiled surfaces facing down and
inward to the spray as shown. This will improve cleaning and

drying results.
Avoid overlapping items like bowls or plates that may trap food.

Place plastics, small plates and glasses in the upper rack.
Wash only plastic items marked "dishwasher safe."

To avoid thumping/clattering noises during operation: Load
dishes so they do not touch one another. Make sure lightweight

load items are secured in the racks.
Use slots in the covers (if provided) and suggested loading

pattens to keep your silverware separated for optimum wash.

}8{:/-

_, CC.4_(/41

....... _/i ,_.,;ji,

Upper rack

10-Place Setting Loading pattern

Upper rack

12-Place Setting Loading pattern

Lower rack When loading silverware, always place sharp

items pointing down. Mix other items
pointing up and some pointing down.

STEP 2

Add Detergent (Dispenser varies by model)

NOTE: If you do not plan to run a wash cycle soon, run a rinse
cycle. Do not use detergent.

• Use automatic dishwasher detergent only. Add powder, liquid

Lower rack

or tablet detergent just before starting a cycle.

A

Upper rack

Lower rack

Make sure nothing keeps spray arm(s) from
spinning freely. It is important for the water
spray to reach all soiled surfaces.

) ._

Make sure that when the dishwasher door is closed no items
are blocking the detergent dispenser.

B

B

A.Cover latch B. Main Wash section C. Pre-Wash section

Fresh automatic dishwasher detergent results in better
cleaning. Store tightly closed detergent container in a cool, dry
place.

For optimum performance, tablet detergent is recommended.
The amount of detergent to use depends on:

How much soil remains on the items - Heavily soiled loads
require more detergent.

The hardness of the water - If you use too little in hard water,
dishes won't be clean. Ifyou use too much in soft water,

glassware will etch.

Soft to Medium Water (0-6 grains per U.S. gallon)
[typical water softener water and some city water]

Medium to Hard Water (7-12 grains per U.S. gallon)
[well water and some city water]

Dependingonyourwaterhardness,filltheMainWashsection
ofthedispenserasshown.FillthePre-Washsectiontothe

levelshown,ifneeded.

NOTE: Fill amounts shown
are for standard powdered
detergent. Follow instructions

on the package when using
other dishwasher detergent.

Add Rinse Aid (Dispenser varies by model)

• Your dishwasher is designed to use rinse aid for good drying

performance. Without rinse aid your dishes and dishwasher
interior will have excessive moisture. The heat dry option will
not perform as well without rinse aid.

• Rinse aid keeps water from forming droplets that can dry as

spots or streaks. They also improve drying by allowing water to

drain off of the dishes after the final rinse.

• Rinse aid helps to reduce excess moisture on the dish racks

and interior of your dishwasher.

Check the rinse aid indicator.
(varies by model) Add rinse aid

when indicator drops to "Refill"

level.

HardWater
SoftWater

MainWash Prs-Wash

Full

Add

HardWater

SoftWater

0 Full

@

(_ Add

STEP 3

Select a Cycle (cycles vary by model)

Press the Select Cycles button until the light below the desired
cycle is on.

NOTE: Heavier cycles and options affect cycle length. Some
cycles and options will take up to 31/2hours to complete.

SoilSense HEAVY NORMAL LIGHT 1 HOUR DELAY

@ @ @ @ @ @

SELECT CYCLE

Select Options (options vary by model)
You can customize your cycles by pressing the options desired.

Repeatedly press the button until the desired combination of

options is selected.

SANI RINSE HiTEMP LIGHT DRY HEATED DRY

@ @ @ @ @

DRAIN

HOLD 3 SEC

TO LOCK

Lock

To add rinse aid, turn the
dispenser cap to "Open" and

lift off. Pour rinse aid into the
opening until the indicator

level is at "Full." Replace the

Refill/_

dispenser cap and turn to
"Lock." Make sure cap is fully

locked

1/4turn to lock

On some models, add rinse
aid by opening the rinse
dispenser lid by gently

pushing in the center of the lid
with your thumb and pulling

up on the edge. Pour rinse aid
into the opening until the

dispenser is full. Then, close
the dispenser by pushing

down gently on the lid.

NOTE: For most water conditions, the factory setting will give good
results. Ifyou have hard water or notice rings or spots, try a higher

setting. Turn the arrow adjuster inside the dispenser by either using
your fingers or inserting a flat-blade screwdriver into the center of
the arrow and turning.

STEP4

Start or Resume a Cycle

• Run hot water at the sink nearest your dishwasher until the
water is hot. Turn off water.

• Push door firmly closed. The door latches
automatically. Select the wash cycle and options Start
desired OR press START/RESUME to repeat the Resume
same cycle and options as in the previous wash D

cycle. For top controls, select cycle and options
first, and then close the door. : r'_

V

• You can add an item anytime before the main "_oooo,,o,:
wash starts. Open the door slowly and add the

item. Close the door firmly. Press START/
RESUME.

The Clean/Complete indicator glows when the cycle is finished.
If you select the Sani Rinse option, the Sanitized indicator

glows when the cycle is finished.

_ _J ,,

Cyde al_'sd ©ptiels ©es6Hl[ptio,lss

SoiISense HEAVY NORMAL LIGHT 1 HOUR DELAY

@ @ @ @ @ @

SELECT CYCLE

This information covers several different models. Your dishwasher may not have all of the cycles and options described. Estimated cycle
times may increase or decrease depending on water temperature, soil conditions, dish load size, and options selected. You can customize
your cycle by selecting an option.

See option selections. If you change your mind, press the option
again to turn off the option, or select a different option. You can

change an option anytime before the selected option begins. At
each stage of the wash cycle, you may hear noises that you are

CYCLES SOIL LEVEL ESTIMATED WATER

The most advanced and versatile cycle. This cycle senses load size,

SoilSense

@,

soil amount, and toughness of soil, to adjust the cycle for optimal
cleaning using only the amount of water and energy needed. Use for all

soil levels.

SANI RINSE HI TEMP LIGHT DRY HEATED DRY

@

DRAIN

_ @ @ @

TO LOCK

CANCEL

HOLD 3 SEC

not used to hearing inyour previous dishwasher. Each cycle will
provide a series of pauses and water sprays throughout the wash

cycle. This is normal and will provide optimal cleaning
performance.

WASH TIME USAGE

DISPLAYED* GALLONS

H:MM W/O (LITERS)

OPTIONS

All soil levels 2:30 3.38 to 7.4

(12.8 to 28.0)

Use for hard-to-clean, heavily soiled pots, pans, casseroles, and

HEAVY

tableware.

@

NORMAL

i HOUR and energy. For improved drying, select the Heated Dry option.

LIGHT

@

SOAK& eliminates the need to presoak dishes saving personal time and effort.

PREWASH For optimal cleaning results during the Soak & Prewash cycle add

SANI RINSE

This cycle with only the Heated Dry option selected, and without other 2:21
options selected, is recommended to completely wash and dry a full

load of normally soiled dishes. The energy usage label is based on this

cycle and option combination.

For fast results, 1 Hour Wash will clean dishes using slightly more water Light 1:00

Use for lightly soiled items. It saves energy. Light 2:21 2.72 (10.29)

This cycle quietly soaks dishes with an extended prewash which All soil levels 7:26 7.4 (28.0)

prewash detergent. Use this cycle for loads with heavy amounts of
dried on or hard to clean baked-on food.

OPTIONS CAN BE WHAT IT DOES ADDEDTIME ADDED

SELECTED TO CYCLE WATER

WITH GALLONS

SoilSense Raises the main wash 0:05 to 1:06 0 to 3.9

Heavy temperature to 135°F (0 to 14.6)

Normal (57°C) and the final

@

Sanitizes dishes and glassware in accordance
with NSF International NSF/ANSI Standard 184

for Residential Dishwashers. Certified residential

dishwashers are not intended for licensed food
establishments. Only sanitizing cycles have been

designed to meet the requirements of the NSF/
ANSI 184 performance standard for soil removal

and sanitization efficacy. There is no intention,

TO LOCK

either directly or indirectly, that all cycles on a
NSF/ANS1184 certified dishwasher meet the

NSF/ANSI 184 performance standard for soil
removal and sanitization efficacy.

The Sani indicator indicates at the end of the cycle

whether the Sani Rinse option was successfully
completed. If indicator does not activate, it is
probably due to cycle being interrupted.

Heavy 3:23 7.4 (28.0)

All soil levels 2.4 to 7.4

(9.09 to 28)

7.87 (29.8)

(LITERS)

rinse temperature to
156°F (69°C)

HI TEMP

@

HEATED DRY

LIGHT DRY

@

DELAY

@

Control Lock

SANI RINSE

OPTIONS CAN BE

SELECTED

WITH

WHAT IT DOES ADDED TIME

TO CYCLE

ADDED

WATER

GALLONS

(LITERS)

Raises water temperature to improve cleaning for
loads containing tough, baked-on food.

SoilSense

Heavy

Normal
Soak &

Raises the main wash

temperature to 135°F

(57°C)

0:05to 0:13

0 -3.9

(0- 14.6)

Prewash

Dries dishes with heat. This option, with the use of
rinse aid, will provide the best drying results.
Plastic items are less likely to deform when loaded
in the top rack. Use Heated Dry for optimum
drying performance or turn the Heated Dry option
off for air dry.

SoilSense

Heavy

Normal

1 Hour

Soak &

Prewash

Uses a heating
element to speed
drying times. Heated

Dry option defaults to
On when any cycle is
selected except for 1

0:08 to 0:46

Hour Wash and Eco.

Turns the heating element on at the end of the

wash portion of the cycle. Its shorter heating time
uses significantly less energy compared to using

Available

with any

cycle

0:11

Heated Dry.
Runs dishwasher at a later time. Select a wash

cycle and options. Each time you press the delay
button it will display the next available delay time.

Available

with any

cycle

Delays start of a cycle up to 24 hours.

Press DELAY. Press START/RESUME. Close door

firmly.

NOTE: The dishwasher remembers the last Delay

you selected. To reset the delay time to something

other than what is displayed, continue to press the
Delay button until the desired delay time is

reached.
NOTE: Anytime the door is opened (such as, to

add a dish); START/RESUME must be pressed
again to resume delay countdown.

Avoids unintended use of dishwasher between cycles, or cycle and option changes during a cycle.

To turn on Control Lock, press and hold SANI RINSE for 3 seconds. Control Lock light will stay on for a short time,

indicating that it is activated. When the Lock indicator is lit all buttons are disabled. If you press any button while your
dishwasher is locked, the light flashes 3 times. The dishwasher door can still be opened/closed while the controls are

locked.

To turn off Control Lock, press and hold SANI RINSE for 3 seconds. Control Lock light turns off.

HOLD 3 SEC

TO LOCK

*Maximum Water added with any combination of options is 4.8 gallons (18.2L).

Control Purpose Comments

Press to start or resume

a wash cycle.

If the door is opened during a cycle or the power is interrupted, the Start/Resume
button LED flashes. Cycle will not resume until door is closed and START/
RESUME is pressed.

DRAIN

CANCEL

HOLD 3 SEC

Press to cancel wash

cycle.

Tofollow progress of your
dishwasher cycle.

NOTE: Indicators shown

are not available on all

models.

Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let
dishwasher drain completely.

The Clean or Complete indicators will glow when a cycle isfinished. (Depending
on your model.)

If you select the Sani Rinse option, when the cycle is finished, the "Sanitized"
indicator glows. Ifyour dishwasher did not properly sanitize your dishes, the light
flashes at the end of the cycle. This can happen if the cycle is interrupted, or
water could not be heated to required temperature. The light goes off when you
open and close the door or press CANCEL.

Fi tratio,lrs System

Your dishwasher has the latest technology in dishwasher filtration. This triple filtration system minimizes sound and optimizes water and
energy conservation while providing superior cleaning performance. Throughout the life of your dishwasher, the filter will require

maintenance to sustain peak cleaning performance.

The triple filter system consists of 2 parts, an upper filter

assembly and a lower filter.

• The upper filter assembly keeps oversized items and
foreign objects, along with very fine food particles, out of

the pump.

• The lower filter keeps food from being recirculated onto

your dishware.

The filters may need to be cleaned when:

• Visible objects or soils are on the Upper Filter Assembly.

• There is degradation in cleaning performance (that is,
soils still present on dishes).

• Dishes feel gritty to the touch.

It is very easy to remove and maintain the filters. The chart
below shows the recommended cleaning frequency.

Lower Filter

Number of Loads If you only scrape before loading* If you scrape and rinse before loading

Per Week

8-12 Every two months Every four months
4-7 Every four months Once per year

I

1-3 Twice per year Once per year

If you wash before loading

Once per year

Once per year

Once per year

*Manufacturer's recommendation: This practice will conserve the water and energy that you would have used to prepare your dishes. This

will also save you time and effort.

Very Hard Water

Ifyou have hard water (above 15 grains), clean your filter at least

once per month. Building up of white residue on your dishwasher

Rinse filter under running water until most soils are removed. Ifyou
have hard-to-remove soils or calcium deposits from hard water, a

soft brush may be required.

indicates hard water. For tips on removing spots and stains, see
"Troubleshooting" section.

Filter Removal Instructions

1. Turn the Upper Filter
Assembly 1¼turn

counterclockwise and lift
out.

2. Separate the upper filter
assembly by gently pulling
apart.

3. Clean the filters as shown.

g tab

To remove Upper Filter Assembly

Cleaning Instructions

IMPORTANT: Do not use wire brush, scouring pad, etc. as they

may damage the filters.

Filter Reinstallation Instructions

1. Noting the previous
illustrations, place the

Lower Filter under the
Locating Tabs in the

bottom of the dishwasher
so the round opening for

the Upper Filter Assembly
lines up with the round
opening in the bottom of

the tub.

2. Insert the Upper Filter
Assembly into the circular

Locating tab

opening in the Lower Filter.

To replace Upper Filter Assembly

Dishwasher Care

CLEANING THE DISHWASHER

Cleaning the Exterior

Clean the exterior of the dishwasher with a soft, damp cloth and
mild detergent. If your dishwasher has a stainless steel exterior, a
stainless steel cleaner is recommended - Stainless Steel Cleaner
and Polish Part Number 31464.

3.

Slowly rotate the filter clockwise until it drops into place.
Continue to rotate until the filter is locked into place. If the
filter is not fully seated (still turns freely), continue to turn
the filter clockwise until it drops and locks into place.

NOTE: The Upper Filter Assembly arrow does not have to
align with the arrow in the Lower Filter as long as the filter is

locked.

IMPORTANT: To avoid damage to dishwasher, do not operate your
dishwasher without the filters properly installed. Be sure the Lower

Filter is securely in place and the Upper Filter Assembly is locked
into place. If the Upper Filter Assembly turns freely, it is not locked

into place.

Drain Air Gap

If you have a drain air gap,
check and clean it if the

dishwasher isn't draining 4_"
well.

Cleaning the Interior

Clean the interior of the dishwasher, with a paste of powdered
dishwasher detergent and water or use liquid dishwasher detergent

on a damp sponge to clean the cooled-down interior.
A white vinegar rinse may remove white spots and film. Vinegar is

an acid, and using it too often could damage your dishwasher.

Put 2 cups (500 mL) white vinegar in a glass or dishwasher-safe

measuring cup on the bottom rack. Run the dishwasher through a
complete washing cycle using an air-dry or an energy-saving dry

option. Do not use detergent. Vinegar will mix with the wash water.

Dishwasher Maintenance Procedure
Removal of Hard Water / Filming: Recommended use of a

monthly maintenance product such as affresh ®tDishwasher
Cleaner Part Number W10282479.

• Load your dishwasher (preferably with dishes affected by
filming/hard water).

• Place tablet in main wash compartment of detergent dispenser.

• Select cycle/option best for heavily soiled dishes and start

dishwasher.

NOTE: Recommended to use a premeasured detergent tablet or
pack for regular daily use.

To Reduce Risk of Property Damage During Vacation or
Extended Time Without Use

• When you will not be using the dishwasher during the summer
months, turn off the water and power supply to the dishwasher.

• Make sure the water supply lines are protected against freezing
conditions. Ice formations in the supply lines can increase
water pressure and cause damage to your dishwasher or
home. Damage from freezing is not covered by the warranty.

• When storing your dishwasher in the winter, avoid water
damage by having your dishwasher winterized by authorized
service personnel.

1-@affresh is a registered trademark of Whirlpool, U.S.A.

10

Firsttrythesolutionssuggestedhere.Ifyouneedfurtherassistanceormorerecommentationsthatmayhelpyouavoidaservicecallrefertothe
warrantypageinthismanualandscanthecodewithyourmobiledeviceorvisithttp://amana.custhelp.com.
InCanada,visithttp://www.amanacanada.ca.

Contactusbymailwithanyquestionsorconcernsattheaddresslistedbelow:
IntheU.S,A,

CustomereXperienceCenter
553BensonRoad

BentonHarbor,MI49022-2692

In Canada

Customer eXperience Centre
200 - 6750 Century Ave.

Mississauga ON L5N 0B7

Pleaseindicateadaytimephonenumberinyourcorrespondence.

Dishwasher is not operating properly

• Dishwasher does not run or stops during a cycle
Is the door closed tightly and latched?

Is the right cycle selected?
Is there power to the dishwasher? Has a household fuse blown, or

has a circuit breaker tripped? Replace the fuse or reset the circuit
breaker. If the problem continues, call an electrician.

Has the motor stopped due to an overload? The motor
automatically resets itself within afew minutes. If it does not

restart, call for service.
Is the water shutoff valve (if installed) turned on?

It is normal for certain cycles to repeatedly pause for several
seconds during the main wash.

• The Clean light is flashing
Call for service.

• Dishwasher will not fill
Is the overfill protection float able to move up

and down freely? Press down to release.

• Dishwasher seems to run too long
The dishwasher can run up to 31/2hours

depending on soil level, water temperature, cycles and options.
Is the water supplied to the dishwasher hot enough? The

dishwasher runs longer while heating water.
Is the dishwasher cycle time within the cycle times? See cycle

sections wash times. A delay automatically occurs in some wash
and rinse cycles until the water reaches the proper temperature.

This dishwasher is equipped with an optical sensor wash that
detects water temperature, soil and detergent amount. Wash

cycles are adjusted based on what is sensed.
IMPORTANT: The very first wash cycle after installation inyour

home will be adjusted to include an additional 2 rinses. This cycle
must not be interrupted for proper sensor adjustment. If this

adjustment cycle is canceled or stopped before the Clean light
comes on at the end of the cycle, the next wash cycle will repeat

this sensor adjustment.

• Water remains in the dishwasher
Is the cycle complete?

• Detergent remains in the covered section of the dispenser
Is the cycle complete?
Is the detergent lump-free? Replace detergent if necessary.

Is the dispenser door blocked by dishes or cookware when the
dishwasher door is closed?

• White residue on the front of the access panel
Was too much detergent used?
Is the brand of detergent making excess foam? Try a different

brand to reduce foaming and eliminate buildup.

• Odor in the dishwasher
Are dishes washed only every 2 or 3 days? Run a rinse cycle once

or twice a day until you have a full load.
Does the dishwasher have a new plastic smell? Run a vinegar rinse

as described in "Dishwasher Care."

Condensation on the kitchen counter (built-in models)

Is the dishwasher aligned with the countertop? Moisture from the
vent in the dishwasher console can form on the counter. Refer to

the Installation Instructions for more information.

Dishes do not dry completely

• Dishes do not dry completely
Did you use a rinse aid? Your dishwasher is designed to use rinse

aid for good drying performance. Without rinse aid your dishes and
dishwasher interior will have excessive moisture. The heat dry

option will not perform as well without rinse aid.

• Dishes are not dry
Did you load your dishwasher to allow proper water drainage? Do

not overload. Use a liquid rinse aid to speed drying.
Are the plastics wet? Plastics often need towel drying.

Is the rinse aid dispenser empty?
Did you use an air-dry or energy-saving dry option? Use a heated

drying option for dryer dishes.

• Excess moisture on racks and dishwasher interior
Check the rinse aid indicator to see that there is rinse aid in the

dispenser.

Spots and stains on dishes

Spotting and filming on dishes

Is your water hard, or is there a high mineral content in your water?
Conditioning the final rinse water with a liquid rinse aid helps

eliminate spotting and filming. Keep the rinse aid dispenser filled.
Always use a high-temp option. If your water hardness is 13 grains

or above, it is strongly recommended that you install a home water
softener. If you do not wish to drink softened water, have the

softener installed onto your hot water supply.
Is the water temperature too low? For best dishwashing results,

water should be 120°F (49°C) as it enters the dishwasher.
Did you use the correct amount of effective detergent? Use

recommended dishwasher detergents only. Do not use less than 1
tbs (15 g) per load. Detergent must be fresh to be effective. Heavy

soil and/or hard water generally require extra detergent.
Is the home water pressure high enough for proper dishwasher

filling? Home water pressure should be 20 to 120 psi (138 to 828
kPa) for proper dishwasher fill. If you have questions about your

water pressure, call a licensed, qualified plumber.
NOTE: To remove spots and film from glassware, remove all

silverware and metal items and see the "Dishwasher Maintenance
Procedure" in the "Dishwasher Care" section.

11

• Silica film or etching (silica film is a milky, rainbow-colored

deposit; etching is a cloudy film)

Sometimes there is a water/chemical reaction with certain types of
glassware. This is usually caused by some combination of soft or

softened water, alkaline washing solutions, insufficient rinsing,
overloading the dishwasher, and the heat of drying. It might not be

possible to avoid the problem, except by hand washing.
To slow this process use a minimum amount of detergent but not

less than 1 tbs (15 g) per load. Use a liquid rinse aid and underload
the dishwasher to allow thorough rinsing. Silica film and etching

are permanent and cannot be removed. Do not use heated drying.

• White spots on cookware with nonstick finish
Has the dishwasher detergent removed cookware seasoning?

Reseason cookware after washing it inthe dishwasher.

• Brown stains on dishes and dishwasher interior
Does your water have high iron content? Rewash dishes using 1-3

tsp (5-15 mL) of citric acid crystals added to the covered section of
the detergent dispenser. Do not use detergent. Follow with a

Normal wash cycle with detergent. If treatment is needed more
often than every other month, the installation of an iron removal

unit is suggested.

Black or gray marks on dishes

Are aluminum items rubbing dishes during washing? Disposable
aluminum items can break down in the dishwasher and cause

marking. Hand wash these items. Remove aluminum markings by
using a mild abrasive cleaner.

Orange stains on plastic dishes or dishwasher interior

Are large amounts of tomato-based foods on dishes placed in the
dishwasher? It may be necessary to use a stain removal product to

remove stains from your dishwasher. Stains will not affect
dishwasher performance.

Noises

Grinding, grating, crunching or buzzing sounds

A hard object has entered the wash module (on some models).
When the object is ground up, the sound should stop. If the noise
persists after a complete cycle, call for service.

Dishes are not completely clean

• Food soil left on the dishes
Is the dishwasher loaded correctly?

Did you choose the cycle that describes the most difficult soil in
your dishwasher? If you have some items with heavier soils, use a

heavier cycle.
Is the water temperature too low? For best dishwashing results,

water should be 120°F (49°C) as it enters the dishwasher.
Did you use the correct amount of fresh detergent? Use

recommended dishwasher detergents only. Do not use less than 1
tbs (15 g) per load. Detergent must be fresh to be effective. Heavy

soil and/or hard water generally require extra detergent.
Is detergent caked in dispenser? Use fresh detergent only. Do not

allow detergent to sit for several hours in a wet dispenser. Clean
dispenser when caked detergent is present.

Is the pump or spray arm clogged by labels from bottles and cans?
Is the home water pressure high enough for proper dishwasher

filling? Home water pressure should be 20 to 120 psi (138 to 828
kPa) for proper dishwasher fill. If you have questions about your

water pressure, call a licensed, qualified plumber.
Are high suds slowing the wash arm? Do not use soap or laundry

detergents. Use recommended dishwasher detergents only.

Dishes are damaged during a cycle

Chipping of dishes

Did you load the dishwasher properly? Load the dishes and
glasses so they are stable and do not strike together from washing

action. Minimize chipping by moving the rack in and out slowly.
NOTE: Antiques, feather-edged crystal, and similar types of china

and glassware might be too delicate for automatic dishwashing.
Wash by hand.

12

ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS REQUIRED

AMANA ®

MAJOR APPLIANCE

LIMITED WARRANTY

TO OBTAIN WARRANTY SERVICE.
Please have the following information available when you call the

Customer eXperience Center:

• Name, address and telephone number

• Model number and serial number

• A clear, detailed description of the problem

• Proof of purchase including dealer or retailer name and address

IF YOU NEED SERVICE:

1. Before contacting us to arrange service, please determine whether your product requires repair. Some

questions can be addressed without service. Please take a few minutes to review the Troubleshooting or
Problem Solver section of the Use and Care Guide, scan the QR code on the right to access additional
resources, or visit http://amana.custhelp.com.

2. All warranty service is provided exclusively by our authorized Amana Service Providers. In the U.S. and Canada,
direct all requests for warranty service to:

Amana Customer eXperience Center

In the U.S.A., call 1-800-843-0304. In Canada, call 1-800-807-6777.

If outside the 50 United States or Canada, contact your authorized Amana dealer to determine whether another warranty applies.

http://amana.custhelp.com

For one year from the date of purchase, when this major

appliance is installed, operated and maintained according to

instructions attached to or furnished with the product,

Amana brand of Whirlpool Corporation or Whirlpool Canada

LP (hereafter "Amana") will pay for Factory Specified

Replacement Parts and repair labor to correct defects in
materials or workmanship that existed when this major
appliance was purchased, or at its sole discretion replace
the product. In the event of product replacement, your

appliance will be warranted for the remaining term of the
original unit's warranty period.

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS

LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS

PROVIDED HEREIN. Service must be provided by a Amana
designated service company. This limited warranty is valid
only in the United States or Canada and applies only when
the major appliance is used in the country in which it was

purchased. This limited warranty is effective from the date of
original consumer purchase. Proof of original purchase date

is required to obtain service under this limited warranty.

1. Commercial, non-residential, multiple-family use, or use inconsistent with
published user, operator or installation instructions.

2. In-home instruction on how to use your product.

3. Service to correct improper product maintenance or installation, installation not
in accordance with electrical or plumbing codes or correction of household

electrical or plumbing (i.e. house wiring, fuses or water inlet hoses).

4. Consumable parts (i.e. light bulbs, batteries, air or water filters, preservation
solutions, etc.).

5. Conversion of products from natural gas or L.P. gas.

6. Damage from accident, misuse, abuse, fire, floods, acts of God or use with
products not approved by Amana.

7. Repairs to parts or systems to correct product damage or defects caused by
unauthorized service, alteration or modification of the appliance.

8. Cosmetic damage including scratches, dents, chips, and other damage to the
appliance finishes unless such damage results from defects in materials and
workmanship and is reported to Amana within 30 days.

9. Discoloration, rust or oxidation of surfaces resulting from caustic or corrosive
environments including but not limited to high salt concentrations, high moisture

or humidity or exposure to chemicals.

10. Food or medicine loss due to product failure.

11. Pick-up or delivery. This product is intended for in-home repair.

12. Travel or transportation expenses for service in remote locations where an
authorized Amana servicer is not available.

13. Removal or reinstallation of inaccessible appliances or built-in fixtures (i.e. trim,

decorative panels, flooring, cabinetry, islands, countertops, drywall, etc.) that

interfere with servicing, removal or replacement of the product.

14. Service or parts for appliances with original model/serial numbers removed,

altered or not easily determined.

The cost of repair or replacement under these excluded circumstances shall

be borne by the customer.

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow

limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty gives you
specific legal rights, and you also may have other rights that vary from state to state or province to province.

DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY

Amana makes no representations about the quality, durability, or need for service or repair of this major appliance other than the representations
contained in this warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with this major appliance,

you should ask Amana or your retailer about buying an extended warranty.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. AMANA
SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation

of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and
you also may have other rights that vary from state to state or province to province.

13

2/14