2-Port USB Charging Wall Plate
Quick Start Guide
Product Highlights
AUWCS02FR AUWCS02FS
Wall plate screws
Indication light
USB charging ports
Installation Step 1
Indication light
USB charging ports
Turn off power to the outlet by
shutting off the switch / breaker
and remove the wall plate.
Wall plate screws
aluratek.com
model AUWCS02FR / AUWCS02FS
qsg Q10418 / qsg Q10419 Copyright © 2016 Aluratek, Inc. All Rights Reserved.
Installation Step 2 Installation Step 3 Technical Support
If you need further assistance, please contact the Aluratek support department for
troubleshooting prior to returning this device.
E-mail: support@aluratek.com
AUWCS02FR:
Insert prongs around receptable and snap into place.
Make sure the USB ports are on the bottom.
AUWCS02FR:
Tighten the wall plate.
Flip the switch / breaker back on.
Web: www.aluratek.com/helpdesk
Local (Irvine, CA): 714-586-8730
AUWCS02FS:
Insert prongs around receptable and snap into place.
Make sure the USB ports are on the top.
AUWCS02FS:
Tighten the wall plate.
Flip the switch / breaker back on.
Congratulations! You have completed the installation
and you are now able to charge your devices through
the USB ports!
Toll free: 1-866-580-1978
Radio and TV Interference Statement Warranty
WARNING!!! This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by whatever measures may be
required to correct the interference.
Aluratek warrants this product against defect in material or workmanship for 1 YEAR
from the date of purchase.
This warranty becomes invalid if the factory-supplied serial number or "warranty void" sticker has
been removed or altered on the product.
This warranty does not cover:
A) Cosmetic damage or damage due to acts of God
B) Accident, misuse, abuse, negligence or modification of any part of the product.
C) Damage due to improper operation or maintenance, connection to improper equipment,
or attempted repair by anyone other than Aluratek.
D) Products sold AS IS or WITH FAULTS.
IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT
FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING SOFTWARE, OR
IT'S DOCUMENTATION.
Aluratek makes no warranty or representation, expressed, implied, or statutory, with respect to it's
products, contents or use of this documentation and all accompanying software, and specifically
disclaims it's quality, performance, merchantability, or fitness for any particular purpose. Aluratek
reserves the right to revise or update it's product, software or documentation without obligation to
notify any individual or entity.
Loading...