18000 mAh Portable Battery Charger
Quick Start Guide
aluratek.com
qsg Q10345 Copyright © 2014 Aluratek, Inc. All Rights Reserved.
APB06F
Product Highlights
Power level indicators
On - Off button
LED flash light
Charge APB06F with the
included Micro USB cable
Charge up to two devices
at the same time*
*Original charging cable required
Tech Support & Warranty InformationOperation Radio and TV Interference Statement
LED flashlight
To turn the LED flashlight on or off, simply press the button once to
power on the powerbank and press the twice to turn On / Off the LED
flashlight.
Checking the Capacity
Press the “Power” button once to check the capacity per below LED status.
If you need further assistance, please contact the Aluratek support
department for troubleshooting prior to returning this device.
E-mail: support@aluratek.com
Web: www.aluratek.com/support
Charging the battery pack
The battery is not fully charged and it is highly recommended that you
charge APB06F before you begin using it.
Note: Using APB06F “out of the box” will not harm the device. You will
experience reduced battery life as the unit will not be fully charged.
1
2
USB OUTPUT
1
5V / 2.0A
2
5V / 1.0A
To charge the device, connect the larger end of the USB cable provided
to your PC or a USB power adapter (not provided) and the Micro USB
end to APB06F. The Red LED will be on while charging. In addition, one
of the 4 Blue LED will be flashing depends on capacity. Once it is fully
charged, the 4 Blue LED will stay on and the Red LED will turn off.
<25% capacity 25 - 50% capacity 50 - 75% capacity >75% capacity
Charging your digital device
Use the original cable that came with your device or a cable with suitable
connector. Connect the USB tip to one of the USB Output ports on the
battery pack. Charging will start automatically once the cable is connected.
A Green LED will be on when your device is been charged.
Local (Irvine, CA): 714-586-8730
Toll free: 1-866-580-1978
Aluratek warrants this product against defect in material or workmanship
for 1 Year from the date of purchase.
For more information, please visit: http://aluratek.com/warranty-return-policy
You can register your product online at: http://aluratek.com/product-registration
WARNING!!! This equipment has been tested and found to comply with the
limits of a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by whatever measures may be
required to correct the interference.
Loading...