ALTUSEN KA9250 User Manual

User Manual

KA9250

Read this guide thoroughly and follow the installation and operation
procedures carefully in order to prevent any damage to the units and/or
any devices that connect to them.

This package contains:

M 1 KA9250 KVM Extender Module
M 1 Power Adapter
M 1 User Manual
M 1 Quick Start Guide

If anything is damaged or missing, contact your dealer.

®

© Copyright 2003 ATEN
Manual Part No. PAPE - 1226-1AX
Printed in Taiwan 01/2003

All brand names and trademarks are the registered property of their respective owners.

2003-01-17

International Co., Ltd.

Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy,
and if not installed and used in accordance with the instruction
manual, may cause interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:

M Reorient or relocate the receiving antenna;
M Increase the separation between the equipment and receiver;
M Connect the equipment into an outlet on a circuit different from

that which the receiver is connected;

M Consult the dealer or an experienced radio/television technician

for help.

2003-01-17

Overview

The KA9250 KVM Extender Module allows the KH0116 and KL0116 16
Port High Density KVM Switches to be operated from a remote console
up to 150m away.

The KA9250 module connects to the KH0116 or KL0116’s RJ-45
Remote Console port via industry standard Category 5 cable for a neat
and reliable installation. When a Local and Remote Console are
present, both can access the Switch.

The KA9250 features a custom ASIC to ensure the utmost in reliability
and compatibility, that can also sense the distance to the KH0116 or
KL0116 and automatically adjust the gain to compensate.

Setup is quick and easy - simply plug the remote console components
(keyboard, monitor and mouse) into the KA9250’s Console ports; run
the Cat. 5 cable to the KH0116 or KL0116’s RJ-45 Remote Console
port; plug in the power adapter; and you are ready to go.

Features

Built-in ASIC for Greater Reliability and Compatibility

M

Category 5 Cable to Connect the Remote Unit to the KH0116 or

M

KL0116 - Up To 150m Away
Push Button Selection of the Active Console

M

High Resolution Video - Up To 1280 x 1024

M

Supports VGA, SVGA, and Multisync Monitors

M

Local Monitor Supports DDC; DDC2; DDC2B

M

Automatic Gain Control - Automatically Adjusts Signal Strength to

M

Compensate for Distance

- 1 -

2003-01-17