Altronix PD8CB Installation Instructions

PD8CB - Power Distribution Module

N

C O M M O N P O W E R O U T P U T S

P

F U S E D P O W E R O U T P U T S

D1

INPU T

R1

LED

SW1

ON OFF

F 1 F 2 F 3 F4 F 5 F 6 F 7 F 8

1 2 3 4 5 6 7 8

N

P

S

Main Fuse

D1

INPU T

R1

LED

SW1

ON OFF

N

P

S

Main Fuse

Overview:

The PD8CB power distribution module converts a single AC or DC output into eight (8) PTC protected outputs.

Specifications:

Input:

• 28VAC or 28VDC up to 14 amp.

Output:

• Eight (8) PTC protected outputs (PTC’s are rated @ 2.5 amp).

• Surge suppression.

Visual Indicators:

• Power output LED indicator.

Additional Features:

• Power ON / OFF switch.

Board Dimensions (approximate):

5.25"L x 3.25"W x 1"H

Installation Instructions:

1. Mount PD8CB in desired location/enclosure.

2. Connect the desired power supply output to terminals marked [INPUT] (Fig. 1A).

3. If using DC v

4. Measure output v
All terminals with common suffix P 1P, 2P...” are same polarity.

5. Set power switch [SW1] to the OFF position.

6. Connect each device to terminal pairs 1 to 8 marked [1P-1N thru 8P - 8N].

7. Set power switch [SW1] to the ON position.

oltage, left terminal is NEG. (-) and right terminal is POS. (+) (Fig. 1A).

oltage before connecting devices. This helps avoid potential damage.

Fig. 1

Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.

140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: [phone]
website: www.altronix.com, e-mail: [e-mail], Lifetime Warranty, Made in U.S.A.
IIPD8CB - Rev. 111704 J18J

Fig. 1A

Neg. (--- )

Pos. (+ )

MEMBER