Pace1PRD - IP and Hi-PoE over Extended
Distance via CAT5e
Rev. DSPace1PRD_10272014
Overview
The Pace1PRD is a long range Ethernet receiver. It is powered via a NetWay1D
Single Port Hi-PoE Injector. The receiver passes Hi-PoE (60W) over the cable to
the eBridge200WPM transceiver which in turn passes this power to an enabled
IP camera/device. These plug and play units facilitate cost effective solutions
for IP devices that need to be installed at distances greater than 100m. They also
Pace1PRD
Agency Listings:
• UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
• CE approved.
Input:
• Powered by NetWay1D Hi-Poe (60W) Injector.
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5e or a single twisted pair UTP.
• Throughput is rated to pass 100mbps of data.
CAT5e or Higher:
• Distance: up to 500m @ 100mbps.
LED Indicators:
• Green - PoE ON (by respective RJ45 jack).
• RJ45 jack: Yellow and Green LED IP Link status,
10/100Base-T/active.
Environmental:
• Operating Temperature:
-- 4ºF to 120.2ºF (-- 20ºC to +49ºC).
provide a simple way to replace legacy analog products with new IP devices over
structured cable.
Specifications
Environmental (cont’d):
• Storage Temperature:
-- 22º to 158ºF (-- 30º to +70ºC).
• Relative humidity: 20 to 85%, non-condensing.
• Operating Altitude: -- 1000 to 6,561.679 ft.
(-- 304.8 to 2000m).
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Applications:
• Extend Network link distance in an industrial
environment over 610m.
• Works with Megapixel, HD720, HD1080 and VGA
(SD) cameras with proper head end equipment.
Mechanical:
• Dimensions (W x L x H approx.):
3.5” x 3.5” x 1” (88.89mm x 88.89mm x 25.4mm).
• Product weight (approx.): 0.25 lbs. (0.11 kg).
• Shipping weight (approx.): 0.42 lbs. (0.19 kg).
Agency Approvals
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
European Conformity