Altronix NETWAYXTG Installation Guide

Repeater Modules

Models Include:

NetWayXT

- IEEE 802.3af (15W) Compliant Repeater Module

NetWayXTX

- IEEE 802.3af (15W) and IEEE 802.3at (30W) Compliant Repeater Module

NetWayXTG (UL evaluation pending)

- 1Gb IEEE 802.3af (15W) and IEEE 802.3at (30W) Compliant Repeater Module

Installation Guide

I.T.E. 43KC

Rev. 042409

More than just power.

TM

Altronix NetWayXT, NetWayXTX and NetWayXTG repeater modules interface with NetWay midspans/

Overview:

endspans to extend data (video) for an additional 100m. A maximum range of 600m for NetWayXT and even
longer for NetWayXTX and NetWayXTG is possible using multiple repeaters, based on camera/device port
power requirement.

Agency Listings:

• UL 60950-1 Information Technology Equipment
(except NetWayXTG).

• CE European Conformity.

Additional Features:

• Repeater module extends range 100m each.

• Port status LEDs.

Additional Features (cont’d):

• Compact insulated housing.

• Plug-and-play installation.

• Auto detection and protection of legacy
non-PoE cameras.

• No external power required.

Installation Instructions:

Features:

NetWayXT/NetWayXTX/NetWayXTG is not intended to be connected to outside plant leads.

1. Mount NetWayXT/NetWayXTX/NetWayXTG in desired location utilizing the mounting hole (Fig. 1a, pg. 2,
Fig. 2a, pg. 3).
Use a proper fastener and/or wall anchor when securing NetWayXT/NetWayXTX/NetWayXTG to the wall.

2. Connect structured cable from port marked [OUT] on NetWay1, NetWay8, NetWay8M, NetWay16,
or NetWay16M to port marked [IN] on the NetWayXT/NetWayXTX/NetWayXTG (Fig. 1b, pg. 2,
Fig. 2b, pg. 3).

3. Connect structured cable from port marked [OUT] on NetWayXT/NetWayXTX/NetWayXTG to the PoE
camera/ device or next NetWayXT/NetWayXTX repeater (Fig. 1b, pg. 2, Fig. 2b, pg. 3, Figs. 3-4, pg. 3 ).

4. Port status LEDs will illuminate on NetWayXT indicating the port is operational
(Fig. 1b, pg. 2, refer to Port LED definitions on pgs. 2-3).

Port LED Definitions for NetWayXT Repeater:

Status Green LED Yellow LED

OFF Indicates it is connected as 10Base-T or no link. Indicates no link

ON Indicates it is connected as 100Base-TX. Indicates a link

Blinking Indicates activity –

NetWayXT

Fig. 1

Fig. 1a Fig. 1b

Made in U.S.A.

PoE
LED

Structured Cable from

Midspan or Endspan

(10/100)

NetwayXT

Repeater

I.T.E. 43KC

Structured

www.altronix.com

Power

OUT

- 2 - NetWayXT / NetWayXTX / NetWayXTG

IN

Cable to

PoE Camera/

Device or

next NetWayXT

Port Status

LEDs