Altronix NETWAYSP8WPN Specsheet

NetWaySP8WPN

®

SPECTRUM

8-port PoE+ Outdoor Hardened Switch

Description

Altronix NetWaySP8WPN PoE+ Outdoor Hardened Switch provides two (2) 1Gb SFP (Fiber)

ports and eight (8) PoE+ (30W) or two (2) Hi-PoE (60W) ports (external 48-55V UL Listed

ITE power supply required), passing data for PoE/PoE+/Hi-PoE compliant devices. Cameras/

edge devices may be located up to 100m from the unit. Embedded LINQ Technology allows

you to monitor, control, and report power and diagnostics from anywhere.

Key Features

NetWaySP8WPN

- Two (2) Gigabit SFP ports.

- 115W total power:

- Eight (8) PoE/PoE+ (up to 30W) ports
or two (2) Hi-PoE (60W) ports.

- Two (2) 10/100/1000 Mbps ports.

- Six (6) 10/100 Mbps ports.

- IEEE 802.3at (30W), IEEE 802.3af (15W) compliant,
or Hi-PoE (60W).

- PoE activity LED indicators.

- UL Listed in the U.S. and Canada.

- CE Approved.

Typical Application

PoE/PoE+

Carefully

observe

polarity

+

48V-56VDC

Input:

--

PoE7

PoE8

or Hi-PoE Device

PORT 7

PoE5

PoE6

PORT 8

PORT 5

PORT 6 (1G)

30W

60W

or Hi-PoE Device

PORT 4PORT 6

30W

60W

PoE/PoE+

PORT 3

PORT 4 (1G)

- Lifetime Warranty / Made in the U.S.A.

Similar products:

- NetWaySP8WPX - 8-port PoE+ Outdoor Hardened Switch
in NEMA 4/4X, IP66-11 enclosure which accommodates
stand-by batteries.

- NetWaySP8WP - 8-port PoE+ Outdoor Hardened Switch
in NEMA 4/4X, IP66-11 enclosure.

- NetWaySP8X - 8-port PoE+ Indoor Hardened Switch.

- NetWaySP8PL - 8-port PoE+ Hardened Switch on Backplane.

- NetWaySP8B - 8-port PoE+ Switch board only.

PWR

NetwaySP8B

PORT 1

PoE1

PoE3

PoE2

PoE4

IP PoE/PoE+

PORT 2

Device

PORTS 4, 6 = 10/100/1000

SFP Port

PORTS 1, 2, 3, 5,7, 8 = 10/100

Link

Link

Spd

Spd

PORT1

PORT3

PORT2

PORT4

SFP1

ALOS

Factory Reset

Composite

Cable

48-55V UL Listed
ITE Power Supply

Carefully observe polarity

Fiber Switch

Rev. NetWaySP8WPN - 04022018

Altronix Corp.

Brooklyn, NY US

www.altronix.com

Factory Reset

Link

Link

Spd

Spd

PORT5

PORT7

PORT6

PORT8

SFP Port

SFP2

ALOS

Fiber to the

next Netway Spectrum

Hardened PoE Switch

NetWaySP8WPN

®

SPECTRUM

8-Port PoE+ Hardened Switch

Specifications

Input

Voltage 48-55V UL Listed ITE power supply
(up to 120W).

Power Output

Maximum Power Eight (8) PoE+ (30W) ports
or two (2) Hi-PoE (60W) ports.

IEEE 802.3at (30W) and
IEEE 802.3af (15W) compliant.

115W total power.
Integral surge protection.

Fiber Ports: Two (2) Gigabit SFP ports.

Ethernet Ports: Six (6) 10/100 Mbps and

two (2) 10/100/1000 Mbps ports.
Connectivity: RJ45, auto-crossover.
Wire type: 4-pair CAT5

or better structured cable.
Distance: up to 100m.
Speed: 10/100/1000 Mbps,

half/full duplex, auto negotiation.

Indicators (LED)

Individual PoE On LEDs for each port.
Individual IP Link status, 10/100Base-T/active LEDs for each port.
ALOS LED indicates fiber connection for SFP port.
Heartbeat LED indicates proper operation of the unit.

LINQ Technology:

Remote network management allows for camera/device reset
and monitoring.

Provides local and/or remote access to critical information via LAN/WAN.
Email and Windows Dashboard Alert notifications report

real-time diagnostics.
Event log tracks history.

Agency Listings

UL/cUL UL60950-1
(Information Technology Equipment).

UL60950-22
(Information Technology Equipment
to be installed Outdoors).

CE European Conformity.

Physical and Environmental

Enclosure Dimensions (H x W x D approx.):

13.31” x 11.31” x 5.59” (338.1mm x 287.3mm x 142mm).
NEMA 4/4X, IP66-11 Rated enclosure for outdoor use.

Product Weight / Shipping (approx.)
Product Weight: 9.5 lbs. (4.3 kg).
Shipping Weight: 10.9 lbs. (4.9 kg).
Temperature
Operating (115W): -40ºC to 75ºC (-40ºF to 167ºF)
Storage: -40ºC to 85ºC (-40ºF to 185ºF)
Relative Humidity: 85% +/-5%.
Operating Altitude: -304.8 to 2,000m.

Accessories

NetWaySP4 and NetWaySP4P Series Fiber Optic Transceivers

Provide four (4) 1Gb SFP ports and four (4) power outputs to be transmitted over composite
fiber (powered) cable (fiber + copper combined) to NetWay Spectrum PoE+ hardened switches.

NetWaySP1A - Ethernet over Fiber Media Converter/Repeater

For Applications requiring an additional SFP (Fiber) Port

NetWaySP1A PoE powered media converter/repeater converts 10/100/1000 Mbps to Fiber (1000Base-X/SX/LX).

P1MM and P1SM10 - SFP Modules

Altronix P1MM and P1SM10 are hot-pluggable SFP fiber transceiver modules and are readily usable with all Altronix
Spectrum fiber optic equipment for 1G transmission rates. The P1MM is to be used with Multi-Mode Fiber for distances up
to 550m. The P1SM10 is to be used with Single-Mode Fiber for distances up to 10Km.

PMK1 Pole Mount Kit (order separately)

PMK1 pole mount kit is designed to simplify installation of outdoor units. It accommodates 2”- 8”(diameter) poles.

phone: [phone] | fax: [phone] | email: [e-mail] | www.altronix.com

Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA