Altronix NETWAYSP4WPN Specsheet

NetWaySP4WPN

®

SPECTRUM

y

4-port PoE+ Hardened Switch

Description

Altronix NetWaySP4WPN Outdoor PoE+ Hardened Switch provides two (2) 1Gb SFP (Fiber)

ports and four (4) PoE+ (30W) or two (2) Hi-PoE (60W) ports, passing data for PoE/PoE+/

Hi-PoE compliant devices. Cameras/edge devices may be located up to 100m from the unit.

Embedded LINQ Technology allows you to monitor, control, and report power and diagnos-

tics from anywhere.

Key Features

NetWaySP4WPN

- Two (2) Gigabit SFP ports.

- 120W total power:

- Four (4) PoE/PoE+ (up to 30W) ports
or two (2) Hi-PoE (60W) ports.

- Four (4) 10/100/1000 Mbps ports.

- IEEE 802.3at (30W), IEEE 802.3af (15W) compliant,
or Hi-PoE (60W).

- PoE activity LED indicators.

- UL Listed in the U.S. and Canada.

- CE Approved.

Typical Application

Carefully

observe

polarity

+

48V-56VDC

Input:

--

Altronix Corp.

Brooklyn, NY US

www.altronix.com

PoE/PoE+

or Hi-PoE Device

PORT 4

PoE3

PoE4

PORT 3

30W

60W

PoE/PoE+

or Hi-PoE Device

PORT 2PORT 3

30W

60W

- Lifetime Warranty / Made in the U.S.A.

Similar products:

- NetWaySP4WPX - Outdoor 4-port PoE+ Hardened Switch
in NEMA 4/4X, IP66-11 enclosure which accommodates
stand-by batteries.

- NetWaySP4WP - Outdoor 4-port PoE+ Hardened Switch
in NEMA 4/4X, IP66-11 enclosure.

- NetWaySP4X - Indoor 4-port PoE+ Hardened Switch.

- NetWaySP4PL - 4-port PoE+ Hardened Switch on Backplane.

- NetWaySP4B - 4-Port PoE+ Switch board only.

PWR

PORT 2

PORT 1

NetwaySP4B

PoE1

PoE2

IP PoE/PoE+

Device

10/100/1000

next Netway Spectrum

Hardened PoE Switch

Factory Reset

Fiber to the

SFP Port

Factory Reset

1000

100

SFP Port

PORT1

PORT2

SFP2

ALOS

Composite

Cable

1000

100

PORT3

PORT4

SFP2

ALOS

48-55V UL Listed
ITE Power Supply

Carefully observe polarit

Fiber Switch

Rev. NetWaySP4WPN - 04022018

NetWaySP4WPN

®

SPECTRUM

4-port PoE+ Hardened Switch

Specifications

Input

Voltage 48-55V UL Listed ITE power supply
(up to 120W).

Power Output

Maximum Power Four (4) PoE+ (30W) ports
or two (2) Hi-PoE (60W) ports.

IEEE 802.3at (30W) and
IEEE 802.3af (15W) compliant.

120W total power.
Integral surge protection.

Fiber Ports: Two (2) Gigabit SFP ports.

Ethernet Ports: Four (4) 10/100/1000 Mbps ports.

Connectivity: RJ45, auto-crossover.
Wire type: 4-pair CAT5

or better structured cable.
Distance: up to 100m.
Speed: 10/100/1000 Mbps,

half/full duplex, auto negotiation.

Indicators (LED)

Individual PoE On LEDs for each port.
Individual IP Link status, 10/100Base-T/active LEDs for each port.
ALOS LED indicates fiber connection for SFP port.
Heartbeat LED indicates proper operation of the unit.

LINQ Technology:

Remote network management allows for camera/device reset
and monitoring.
Provides local and/or remote access to critical information via LAN/WAN.
Email and Windows Dashboard Alert notifications report

real-time diagnostics.
Event log tracks history.

Agency Listings

UL/cUL UL60950-1
(Information Technology Equipment).

UL60950-22
(Information Technology Equipment
to be installed Outdoors).

CE European Conformity.

Physical and Environmental

Enclosure Dimensions (H x W x D approx.):

13.31” x 11.31” x 5.59” (338.1mm x 287.3mm x 142mm).
NEMA 4/4X, IP66-11 Rated enclosure for outdoor use.

Product Weight / Shipping (approx.)
Product Weight: 9.5 lbs. (4.3 kg).
Shipping Weight: 10.9 lbs. (4.9 kg).
Temperature
Operating (120W): -40ºC to 75ºC (-40ºF to 167ºF)
Storage: -40ºC to 85ºC (-40ºF to 185ºF)
Relative Humidity: 85% +/-5%.
Operating Altitude: -304.8 to 2,000m.

Accessories

NetWaySP1A - Ethernet over Fiber Media Converter/Repeater

For Applications requiring an additional SFP (Fiber) Port

NetWaySP1A PoE powered media converter/repeater converts 10/100/1000 Mbps to Fiber (1000Base-X/SX/LX).

P1MM and P1SM10 - SFP Modules

Altronix P1MM and P1SM10 are hot-pluggable SFP fiber transceiver modules and are readily usable with all Altronix
Spectrum fiber optic equipment for 1G transmission rates. The P1MM is to be used with Multi-Mode Fiber for distances up
to 550m. The P1SM10 is to be used with Single-Mode Fiber for distances up to 10Km.

PMK1 Pole Mount Kit (order separately)

PMK1 pole mount kit is designed to simplify installation of outdoor units. It accommodates 2”- 8”(diameter) poles.

phone: [phone] | fax: [phone] | email: [e-mail] | www.altronix.com

Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA