Altronix NETWAY4ELWPX, NETWAYSP3LWPX, NETWAYSP4LWPX, NETWAYSP8LWPX Specsheet

NetWaySPLWPX Series

®

SPECTRUM

Hardened PoE+ Switches with Optimized
Lithium Iron Phosphate Battery Charger

Description

Altronix Hardened Ethernet over Fiber PoE+ Switches with Optimized Lithium Iron Phosphate Battery
Charger provide one (1) or two (2) 1Gb SFP (Fiber) ports, three (3), four (4) or eight (8) PoE (up to
15W) or two (2) PoE+ (up to 30W) ports passing data for PoE/PoE+ compliant devices. Outputs are
also configurable for a single Hi-PoE (60W) port. These units are designed to support a single 12V
LiFePO4 (Lithium Iron Phosphate) battery for high storage and charge/discharge cycle life reliability.

Key Features

- One (1) or two (2) Gigabit SFP ports.

- Built-in charger for 12V LiFePO4 (Lithium Iron Phosphate) battery.

NetWaySP4LWPX

- 75W total power.

- IEEE 802.3af (15W), IEEE 802.3at (30W) and IEEE802.3bt
(Type 3 “4PPoE” 60W) compliant.

- Automatic switch over to stand-by battery when AC fails.

- NEMA4/4X, IP66 Rated enclosure for outdoor use.

- Lifetime Warranty / Made in the U.S.A.

- PoE activity LED indicators.

NetWaySPLWPX Series Hardened PoE+ Switch Configuration Reference Chart

Altronix Model Number SFP Ports PoE and PoE+ Ports (up to 30W) Hi-PoE Ports (up to 60W)
NetWaySP3LWPX
NetWaySP4LWPX
NetWay4ELWPX
NetWaySP8LWPX

1 3 1
2 4 Up to 2*
1 4 1
2 8 Up to 2*

*Note: Units provide a total of 75W power. Thus, at any time, only one designated port can provide full 60W output.

Typical Application

IP PoE/PoE+

Device

PoE/PoE+

or Hi-PoE Device

PoE/PoE+

or Hi-PoE Device

PWR

+

–

Input:

48V-56VDC

From Power Supply

(factory installed)

NetwaySP4B

PORT 1

PoE1

PORT 2

PoE2

PORT 3

PoE3

PORT 4

PoE4

IP PoE/PoE+

Device

10/100/1000

60W

PORT 2PORT 3

30W

60W

30W

Altronix Corp.

Brooklyn, NY US

www.altronix.com

60W

Operation

30W

Factory Reset

1000

100

PORT1

PORT2

1000

100

PORT3

PORT4

SFP2

ALOS

SFP Port

Hardened PoE Switch

SFP2

ALOS

SFP Port

Fiber to the next

Netway Spectrum

Fiber to Switch

Rev. NetWaySPLWPX - 06172019

NetWaySPLWPX Series

®

SPECTRUM

Hardened PoE+ Switches with Optimized
Lithium Iron Phosphate Battery Charger

Specifications

Input

Voltage 115VAC, 60Hz, 2.5A or
230VAC, 50/60Hz, 1.3A.

Fusing 5A/250V.

Power Output

See Configuration Chart for output ports.
Integral surge protection.

Fiber Ports: One (1) or two (2) Gigabit SFP ports.

Back-up Battery (not included)

Type LiFePO4 (Lithium Iron Phosphate).
Failover Upon AC loss, instantaneous.

LINQ Technology:

Remote network management allows for camera/device reset and monitoring.
Provides local and/or remote access to critical information via LAN/WAN.
Email and Windows Dashboard Alert notifications report

real-time diagnostics.
Event log tracks history.

Ethernet Ports: 10/100/1000 Mbps ports.
Connectivity: RJ45, auto-crossover.
Wire type: 4-pair CAT5

or better structured cable.
Distance: up to 100m.
Speed: 10/100/1000 Mbps,

half/full duplex, auto negotiation.

Indicators (LED)

Individual PoE On LEDs for each port.
Individual IP Link status, 10/100Base-T/active LEDs for each port.
ALOS LED indicates fiber connection for SFP port.
Heartbeat LED indicates proper operation of the unit.

Accessories

PMK2 - Pole Mount Kit

(order separately)

PMK2 pole mount kit is designed to simplify
installation of outdoor units.
It accommodates 2”- 8”(diameter) poles.

NetWaySP1A ­ Ethernet over Fiber Media
Converter/Repeater

For Applications requiring an
additional SFP (Fiber) Port

NetWaySP1A PoE powered media converter/repeater converts
10/100/1000 Mbps to Fiber (1000Base-X/SX/LX).

P1MM and P1SM10 ­ SFP Modules

P1MM and P1SM10 are hot-pluggable SFP
fiber transceiver modules and are readily
usable with all Altronix Spectrum fiber optic
equipment for 1G transmission rates.
The P1MM is to be used with Multi-Mode Fiber for distances up to 550m.
The P1SM10 is to be used with Single-Mode Fiber for distances up to 10km.

Physical and Environmental

Enclosure Dimensions (H x W x D approx.):

17.53” x 15.3” x 6.67” (445.3mm x 388.6mm x 169.4mm).
NEMA 4/4X, IP66-11 Rated enclosure for outdoor use.
Accommodates one (1) LiFePO4 (Lithium Iron Phosphate) battery.

Product Weight / Shipping (approx.)
Product Weight: 15 lb. (6.8 kg).
Shipping Weight: 17.5 lb. (7.9 kg).
Temperature
Operating: 60W: -40ºC to 75ºC (-40ºF to 167ºF).

75W: -40ºC to 70ºC (-40ºF to 158ºF).

Storage: -40ºC to 85ºC (-40ºF to 185ºF).
Relative Humidity: 85% +/-5%.
BTU/Hr. (approx.): 61 BTU/Hr.
Operating Altitude: -304.8 to 2,000m.

P1AB2K ­ SFP Single-Mode
Transceiver Kit

P1A2K and P1B2K are hot-pluggable bi­ directional single strand SFP fiber transceiver
modules and are readily usable with all
Altronix NetWay Spectrum fiber optic equipment for 1G transmission rates at
distances up to 2km.

P1GCE ­ SFP Copper Transceiver

P1GCE is a hot-pluggable SFP transceiver
module and is readily usable with all Altronix
NetWay Spectrum equipment for 1G
transmission rates. The P1GCE is to be used
with CAT5e or better copper ethernet for
distances up to 100m.

BTL125 BTL125 -

12VDC/4.5AH LiFePO

Usable with all Altronix Spectrum fiber optic
equipment with Optimized Lithium Iron
Phosphate Battery Charger.

Battery.

4

phone: [phone] | fax: [phone] | email: [e-mail] | www.altronix.com

Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA