Altronix NETWAYSP3B Specsheet

NetWaySP3B

®

SPECTRUM

3-port PoE+ Switch Board

Description

Altronix NetWaySP3B PoE+ Switch provides a 1Gb SFP port, two (2) 60W ports and

a single 30W port. Cameras/edge devices may be located up to 100m from the unit.

Embedded LINQ Technology allows you to monitor, control, and report power and

diagnostics from anywhere.

Key Features

- One (1) Gigabit SFP port.

- 120W total power:

- Two (2) 60W ports (PoE/PoE+ / Hi-PoE)

- One (1) 30W port (PoE/PoE+).

Similar products:

- NetWaySP3WPX - Outdoor 3-port PoE+ Hardened Switch
in NEMA 4/4X, IP66-11 enclosure which accommodates
stand-by batteries.

NetWaySP3B

- 10/100/1000 Mbps each port.

- IEEE 802.3at (30W), IEEE 802.3af (15W) compliant,
or Hi-PoE (60W).

- PoE activity LED indicators.

- UL Listed in the U.S. and Canada.

- CE Approved.

- Lifetime Warranty / Made in the U.S.A.

Typical Application

PoE/PoE+

or Hi-PoE Device

PORT1

Spd: 10/100/1000

PoE: 30W/60W

PoE_SPR

Factory Reset

PoE_Data

Link

Spd

Carefully
observe
polarity

3.3V PWR

PoE/PoE+

or Hi-PoE Device

PoE: 30W/60W

PoE_Data

PoE_SPR

Link

Brooklyn, NY US

www.altronix.com

Altronix Cor

- NetWaySP3WP - Outdoor 3-port PoE+ Hardened Switch
in NEMA 4/4X, IP66-11 enclosure.

- NetWaySP3WPN - Outdoor 3-port PoE+ Hardened Switch
only in NEMA 4/4X, IP66-11 enclosure.

- NetWaySP3X - Indoor 3-port PoE+ Hardened Switch.

- NetWaySP3PL - 3-port PoE+ Hardened Switch on Backplane.

PORT2

Spd: 10/100/1000

Spd

NetwaySP3B

48-55V UL Listed
ITE Power Supply

Spd

+

--

48V-56VDC

Input:

PoE

Link

Spd: 10/100/1000

PoE: 30W

SFP

PORT3 (Uplink)

ALOS

Carefully observe polarity

Composite

Cable

IP PoE/PoE+

Device or

Fiber Switch

NetWaySP1A

Rev. NetWaySP3B - 04022018

NetWaySP3B

®

SPECTRUM

3-port PoE+ Switch Board

Specifications

Input

Voltage 48-55V UL Listed ITE power supply
(up to 120W).

Power Output

Maximum Power 120W total power:
Two (2) 60W ports (PoE/PoE+ / Hi-PoE).
One (1) 30W port (PoE/PoE+).
10/100/1000 Mbps each port.
IEEE 802.3at (30W), IEEE 802.3af (15W)

compliant, or Hi-PoE (60W).
Integral surge protection.

Fiber Ports: One (1) Gigabit SFP port.

Ethernet Ports: Three (3) 10/100/1000 Mbps ports.

Connectivity: RJ45, auto-crossover.
Wire type: 4-pair CAT5

or better structured cable.
Distance: up to 100m.
Speed: 10/100/1000 Mbps,

half/full duplex, auto negotiation.

Indicators (LED)

Individual PoE On LEDs for each port.
Individual IP Link status, 10/100Base-T/active LEDs for each port.
ALOS LED indicates fiber connection for SFP port.
Heartbeat LED indicates proper operation of the unit.

LINQ Technology:

Remote network management allows for camera/device reset
and monitoring.

Provides local and/or remote access to critical information via LAN/WAN.
Email and Windows Dashboard Alert notifications report real-time diagnostics.
Event log tracks history.

Agency Listings

UL/cUL UL60950-1
(Information Technology Equipment).

UL60950-22
(Information Technology Equipment
to be installed Outdoors).

CE European Conformity.

Physical and Environmental

Board Dimensions (L x W x H approx.):

5.625” x 4.5” x 0.625” (158.8mm x 142.9mm x 15.9mm).

Product Weight / Shipping (approx.)
Product Weight: 0.25 lb. (0.11 kg).
Shipping Weight: 0.75 lb. (0.34kg).
Temperature
Operating: 60W: -40ºC to 75ºC (-40ºF to 167ºF).

75W: -40ºC to 70ºC (-40ºF to 158ºF).
100W: -40ºC to 55ºC (-40ºF to 131ºF).
120W: -40ºC to 45ºC (-40ºF to 113ºF).

Storage: -40ºC to 85ºC (-40ºF to 185ºF).
Relative Humidity: 85% +/-5%.
Operating Altitude: -304.8 to 2,000m.

Accessories

PoE201 - 120W Power Supply/Charger

PoE201 provides 120W for NetWay Spectrum switches with 1Gb SFP ports.
It also features a built-in charger for sealed lead acid or gel type batteries.

NetWaySP1A - Ethernet over Fiber Media Converter/Repeater

For Applications requiring an additional SFP (Fiber) Port

NetWaySP1A PoE powered media converter/repeater converts 10/100/1000 Mbps to Fiber (1000Base-X/SX/LX).

P1MM and P1SM10 - SFP Modules

Altronix P1MM and P1SM10 are hot-pluggable SFP fiber transceiver modules and are readily usable with all Altronix
Spectrum fiber optic equipment for 1G transmission rates. The P1MM is to be used with Multi-Mode Fiber for distances up
to 550m. The P1SM10 is to be used with Single-Mode Fiber for distances up to 10Km.

phone: [phone] | fax: [phone] | email: [e-mail] | www.altronix.com

Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA