Altronix NETWAYSP1BTWPX Specsheet
NetWaySP1BTWPX
®
SPECTRUM
802.3bt Media Converter/Injector with Integral Power
Description
Altronix NetWaySP1BTWPX Outdoor 802.3bt media converter/injector provides a single
802.3bt (4PPoE) port up to 90W and accommodates Fiber (1000Base-X/SX/LX) or
structured cable to transmit data. Units can be deployed with structured cable, conventional single/multimode fiber or composite cable (fiber + copper combined). Cameras/
edge devices may be located up to 100m from the unit. NEMA 4/4X IP66-11 enclosure
accommodates stand-by batteries
Key Features
- Single PoE port provides up to 90W for high PoE
illuminators, lighting, PTZ cameras, etc.
- Gigabit SFP port.
- 10/100/1000 Mbps data port.
- IEEE 802.3bt (90W), IEEE 802.3at (30W)
and IEEE 802.3af (15W) compliant.
- Built-in battery charger.
- Lifetime Warranty / Made in the U.S.A.
- NEMA 4/4X, IP66-11 Rated enclosure for outdoor use.
Specifications
Input
115VAC, 60Hz, 2.5A or 230VAC, 50/60Hz, 1.3A.
Input Fuse 5A/250V.
Fiber Port
One (1) 1Gb SFP port.
PoE Port
Single port rated up to 90W max.
IEEE 802.3af, 802.3at and 802.3bt compliant
Data Port
Connectivity: RJ45, auto-crossover.
Wire type: 4-pair CAT5e.
Distance: up to 100m.
Speed: 10/100/1000 Mbps.
Back-up Battery (batteries not included)
Type Sealed lead acid or gel type.
Failover Upon AC loss, instantaneous.
Indicators (LED)
Yellow/Green RJ45 LEDs: Yellow: 10/100
Green: 10/100/1000
Green PoE LED: PoE present.
Green SFP (Fiber) LED: SFP connection.
NetWaySP1BTWPX
Similar products:
- NetWaySP1BTWP - Outdoor 802.3bt media
converter/injector with integral power in NEMA 4/4X
IP66-11 enclosure.
- NetWaySP1BTWPN - Outdoor 802.3bt media
converter/injector in compact NEMA 4/4 IP66-11 enclosure
(powered via NetWaySP4P with composite cable application)
- NetWaySP1BT - 802.3bt Media converter/injector only
Features
Auto detection and protection of legacy non-PoE cameras/devices.
Lifetime Warranty. Made in U.S.A.
Agency Listings
CE European Conformity.
Physical and Environmental
Enclosure Dimensions (H x W x D approx.):
17.53” x 15.3” x 6.67” (445.3mm x 388.6mm x 169.4mm).
NEMA 4/4X, IP66-11 Rated enclosure for outdoor use.
Product Weight / Shipping (approx.)
Product Weight: 15 lb. (6.8 kg).
Shipping Weight: 17.5 lb. (7.9kg).
Temperature
Operating: 60W: -40ºC to 75ºC (-40ºF to 167ºF).
80W: -40ºC to 70ºC (-40ºF to 158ºF).
90W: -40ºC to 60ºC (-40ºF to 140ºF).
Storage: -40ºC to 85ºC (-40ºF to 185ºF).
Relative Humidity: 85% +/-5%
BTU/Hr. (approx.): 61 BTU/Hr.
Operating Altitude: -304.8 to 2,000m.
Rev. NetWaySP1BTWPX - 03022020
230VAC 115VAC
5A 250VA
--- DC ++ BAT –
To Stand-by
Batteries
230VAC 115VAC
LGN
Fiber to the Switch
or Netway Spectrum
Hardened PoE Switch
Ethernet / Data
802.3bt (90W) compliant IP device
NetWaySP1BT
802.3bt Converter/Injector
Input: 48–56VDC
Output: IEEE 802.3bt (90W)
48-56VDC
-- Input +
802.3bt
Output
Data
Port
Fiber
Signal
PoE
Signal SFP
Ground
Ground
Input Voltage
Selection Switch
NetWaySP1BTWPX
®
SPECTRUM
802.3bt Media Converter/Injector with Integral Power
Typical Application
Accessories
PMK2 - Pole Mount Kit
(order separately)
PMK2 pole mount kit is designed to simplify installation of outdoor units. It accommodates 2”- 8”(diameter) poles.
P1MM and P1SM10 - SFP Modules
Altronix P1MM and P1SM10 are hot-pluggable SFP fiber transceiver modules and are readily usable with all Altronix
Spectrum fiber optic equipment for 1G transmission rates. The P1MM is to be used with Multi-Mode Fiber for distances up
to 550m. The P1SM10 is to be used with Single-Mode Fiber for distances up to 10Km.
P1AB2K - SFP Single-Mode Transceiver Kit
P1A2K and P1B2K are hot-pluggable bi-directional single strand SFP fiber transceiver modules and are readily usable
with all Altronix NetWay Spectrum fiber optic equipment for 1G transmission rates at distances up to 2km.
P1GCE - SFP Copper Transceiver
P1GCE is a hot-pluggable SFP transceiver module and is readily usable with all Altronix NetWay Spectrum equipment for
1G transmission rates. The P1GCE is to be used with CAT5e or better copper ethernet for distances up to 100m.
phone: +1 718.567.8181 | fax: +1 718.567.9056 | email: info@altronix.com | www.altronix.com
Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA
Loading...