Altronix NETWAY4EWP Specsheet

®
SPECTRUM
NetWay4EWP
4-port PoE+ Hardened Switch
Description
Altronix NetWay4EWP Outdoor PoE+ Hardened Switch provides a 1Gb SFP port
and four (4) PoE+ (30W) ports or up to two (2) Hi-PoE (60W) ports. Cameras/edge
devices may be located up to 100m from the unit. Embedded LINQ Technology
Key Features
NetWay4EWP
- Four (4) PoE/PoE+ (up to 30W) ports or two (2) Hi-PoE (60W) ports.
- IEEE 802.3af (15W) and IEEE 802.3at (30W) compliant.
- 120W total power.
- One (1) Gigabit SFP port.
- NEMA4/4X, IP66 Rated enclosure for outdoor use.
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails.
- PoE activity LED indicators.
- UL Listed in the U.S. and Canada.
Typical Applications
- CE Approved.
- Lifetime Warranty / Made in the U.S.A.
Similar products:
- NetWay4EWPX - Outdoor 4-port PoE+ Hardened Switch in NEMA 4/4X, IP66-11 enclosure which accommodates stand-by batteries.
- NetWay4EWPN - Outdoor 4-port Hardened Switch only in NEMA 4/4X, IP66-11 enclosure.
- NetWay4EX - Indoor 4-port PoE+ Hardened Switch.
- NetWay4EPL - 4-port PoE+ Hardened Switch on Backplane.
- NetWay4EB - 4-port PoE+ Switch board only.
OR
Fiber (1Gb)Fiber (1Gb)
CAT5e
(100m)
PoE/PoE+ (up to 30W) PoE/PoE+ (up to 30W)
IP Camera IP Camera
CAT5e
(100m)
PTZPTZ
IP Camera
CAT5e
(100m)
Hi-PoE (up to 60W)
IP Camera
Rev. NetWay4EWP-04022018
®
SPECTRUM
NetWay4EWP
4-port PoE+ Hardened Switch
Specifications
Input
Voltage 115VAC, 60Hz, 2.5A or 230VAC, 50/60Hz, 1.3A.
Fusing 5A/250V.
Power Output
Maximum Power Four (4) PoE+ (30W) ports or two (2) Hi-PoE (60W) ports.
IEEE 802.3af (15W) and IEEE 802.3at (30W) compliant.
120W total power. Integral surge protection.
Fiber Port: One (1) Gigabit SFP port.
Back-up Battery (not included)
Type Sealed lead acid or gel type. Failover Upon AC loss, instantaneous.
Indicators (LED)
Individual PoE On LEDs for each port. Individual IP Link status, 10/100Base-T/active LEDs for each port. ALOS LED indicates fiber connection for SFP port. Heartbeat LED indicates proper operation of the unit.
LINQ Technology:
Remote network management allows for camera/device reset and monitoring. Provides local and/or remote access to critical information via LAN/WAN. Email and Windows Dashboard Alert notifications report
real-time diagnostics. Event log tracks history.
Agency Listings
UL/cUL UL60950-1 (Information Technology Equipment).
UL60950-22 (Information Technology Equipment to be installed Outdoors).
CE European Conformity.
Physical and Environmental
Enclosure Dimensions (H x W x D approx.):
13.31” x 11.31” x 5.59” (338.1mm x 287.3mm x 142mm). NEMA 4/4X, IP66-11 Rated enclosure for outdoor use.
Product Weight / Shipping (approx.) Product Weight: 10.32 lbs. (4.68 kg). Shipping Weight: 11.7 lbs. (5.3 kg). Temperature Operating: 60W: -40ºC to 75ºC (-40ºF to 167ºF).
75W: -40ºC to 70ºC (-40ºF to 158ºF). 100W: -40ºC to 55ºC (-40ºF to 131ºF). 120W: -40ºC to 45ºC (-40ºF to 113ºF).
Storage: -40ºC to 85ºC (-40ºF to 185ºF). Relative Humidity: 85% +/-5% BTU/Hr. (approx.): 61 BTU/Hr. Operating Altitude: -304.8 to 2,000m.
Accessories
NetWaySP1A - Ethernet over Fiber Media Converter/Repeater
For Applications requiring an additional SFP (Fiber) Port
NetWaySP1A PoE powered media converter/repeater converts 10/100/1000 Mbps to Fiber (1000Base-X/SX/LX).
P1MM and P1SM10 - SFP Modules
Altronix P1MM and P1SM10 are hot-pluggable SFP fiber transceiver modules and are readily usable with all Altronix Spectrum fiber optic equipment for 1G transmission rates. The P1MM is to be used with Multi-Mode Fiber for distances up to 550m. The P1SM10 is to be used with Single-Mode Fiber for distances up to 10Km.
PMK1 Pole Mount Kit (order separately)
PMK1 pole mount kit is designed to simplify installation of outdoor units. It accommodates 2”- 8”(diameter) poles.
Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA
phone: +1 718.567.8181 | fax: +1 718.567.9056 | email: info@altronix.com | www.altronix.com
Loading...