Alto Shaam 600-LVD Service Manual
#824 • 4/06
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 USA
PHONE: 262.251.3800 • 800.558.8744 USA/CANADA FAX: 262.251.7067 • 800.329.8744 U.S.A. ONLY
WEBSITE: www.alto-shaam.com
PRINTED IN U.S .A .
®
Hot Food Display
Cabinet, Electric
Model:
600-LVD
• INSTALLATION
• OPERATION
• MAINTENANCE
#824 Operation and Care Manual • 1.
DELIVERY
This Alto-Shaam appliance has been thoroughly
tested and inspected to insure only the highest
quality unit is provided. Upon receipt, check for
any possible shipping damage and report it at once
to the delivering carrier. See Transportation
Damage and Claims section located in this manu-
al.
This appliance, complete with unattached items
and accessories, may have been delivered in one or
more packages. Check to ensure that all standard
items and options have been received with each
model as ordered.
Save all the information and instructions
packed with the appliance. Complete and return
the warranty card to the factory as soon as possible
to assure prompt service in the event of a warranty
parts and labor claim.
This manual must be read and understood by
all people using or installing the equipment model.
Contact the Alto-Shaam service department if you
have any questions concerning installation, opera-
tion, or maintenance.
NOTE: All claims for warranty must include the
full model number and serial number of
the unit.
UNPACKING
1. Carefully remove the appliance from the
carton or crate.
NOTE: Do not discard the carton and other
packaging material until you have
inspected the unit for hidden damage
and tested it for proper operation.
2. Read all instructions in this manual carefully
before initiating the installation of this appliance.
DO NOT DISCARD THIS MANUAL.
This manual is considered to be part of the
appliance and is to be provided to the owner or
manager of the business or to the person
responsible for training operators. Additional
manuals are available from the Alto-Shaam
service department.
3. Remove all protective plastic film, packaging
materials, and accessories from the appliance
before connecting electrical power. Store any
accessories in a convenient place for future use.
®
#824 Operation and Care Manual • 2.
SAFETY PROCEDURES
AND PRECAUTIONS
Knowledge of proper procedures is essential to the
safe operation of electrically and/or gas energized
equipment. In accordance with generally accepted
product safety labeling guidelines for potential
hazards, the following signal words and symbols
may be used throughout this manual.
Used to indicate the presence of a hazard that will
cause severe personal
injury, death, or substantial
property damage if the
warning included with this
symbol is ignored.
Used to indicate the
presence of a hazard that
can cause personal injury,
possible death, or major
property damage if the
warning included with
this symbol is ignored.
Used to indicate the presence of a hazard that can
or will cause minor or
moderate personal injury
or property damage if the
warning included with
this symbol is ignored.
Used to indicate the presence of a hazard that can or
will cause minor personal
injury, property damage, or
a potential unsafe practice
if the warning included
with this symbol is ignored.
Used to notify personnel of instal-
lation, operation, or maintenance
information that is important but
not hazard related.
1. This appliance is intended to cook, hold or
process foods for the purpose of human
consumption. No other use for this appliance
is authorized or recommended.
2. This appliance is intended for use in
commercial establishments where all
operators are familiar with the purpose,
limitations, and associated hazards of this
appliance. Operating instructions and
warnings must be read and understood
by all operators and users.
3. Any troubleshooting guides, component
views, and parts lists included in this
manual are for general reference only
and are intended for use by qualified
technical personnel.
4. This manual should be considered a
permanent part of this appliance. This
manual and all supplied instructions,
diagrams, schematics, parts lists, notices,
and labels must remain with the
appliance if the item is sold or moved to
another location.
NOTE:
1. This appliance,, complete with unattached items
and accessories, may be delivered in one or more
packages. Check to insure that all the following
items have been received as standard with each
unit:
12: Chrome plated wire shelves
2. Alto-Shaam appliances are designed for the
purpose of maintaining hot food at a temperature
for safe consumption. The unit must be installed
on a level surface in a location that will permit
the equipment to function for its intended purpose and allow adequate access for proper cleaning and maintenance.
3. The appliance must not be installed in any area
where it will be affected by steam, grease,
dripping water, high temperatures, or any other
severely adverse conditions.
4. Level the appliance from side-to-side and
back-to-back with the use of a spirit level.
5. In order to maintain standards established by
the National Sanitation Foundation, all stationary
counter-mounted equipment must be secured
flush to the counter and the entire base sealed to
the counter with NSF approved sealant or
equipped with 4" (102mm) legs to provide minimum unobstructed space beneath the unit.
The rubber legs supplied with the unit are
1-1/2" (38mm) high. Warranty will become null
and void if these directions are not followed.
#824 Operation and Care Manual • 3.
INSTALLATION
Site Installation
TO PREVENT PERSONAL INJURY,
USE CAUTION WHEN MOVING OR
LEVELING THIS APPLIANCE.
NET WEIGHT
120 lb. (54 kg)
IMPROPER INSTALLATION, ALTERATION,
ADJUSTMENT, SERVICE OR MAINTENANCE
COULD RESULT IN SEVERE INJURY, DEATH
OR CAUSE PROPERTY DAMAGE.
CLEARANCE REQUIREMENTS
3-inches (76mm) at the back
2-inches (51mm) at the top
2-inches (51mm) at both sides
#824 Operation and Care Manual • 4.
INSTALLATION
Site Installation
60" (1524mm)
PASS-THROUGH
40" (1016mm)
24-1/2" (622mm)
20-5/8" (524mm)
2-5/16" (59mm)
BETWEEN SHELVES
19-7/8" (505mm)
31-1/2" (800mm)
1-1/8"
(29mm)
1-1/8" (29mm)
PASS-THROUGH
Outside Dimensions
Options and Accessories
Legs, 4" (102mm) 4249
Wire Shelf Reinforcement
—
TWO REQUIRED FOR EACH SHELF 12210
Shelf, Chrome Plated Wire SH-22608
1. An identification tag is permanently mounted
on the cabinet.
2. Plug the unit into a properly grounded
receptacle ONLY. Arcing will occur when
connecting or disconnecting the unit unless
all controls are in the “OFF” position.
3. Position the unit so the cord is easily accessible
in case of any emergencies. If necessary, a
proper receptacle or outlet configuration, as
required for the unit, must be installed by a
licensed electrician in accordance with
applicable, local electrical codes.
230V:
To prevent an electrical shock hazard between the
appliance and other appliances or metal parts in
close vicinity, an equalization-bonding stud is
provided. An equalization bonding lead must be
connected to this stud and the other appliances /
metal parts to provide sufficient protection against
potential difference. The terminal is marked with
the following symbol.
NOTE: The appliance must be connected to an
electrical circuit that is protected by an
external GFCI outlet.
ELECTRICAL
VOLTAGE PHASE CYCLE/HZ AMPS kW
120 1 60 14.2 1.7 NEMA 5-20P
20A-125V PLUG
230 1 50/60 9.8 2.3 CEE 7/7
220-230V PLUG
#824 Operation and Care Manual • 5.
INSTALLATION
Electrical Installation
ELECTRICAL CONNECTIONS MUST
BE MADE BY A QUALIFIED SERVICE
TECHNICIAN IN ACCORDANCE WITH
APPLICABLE ELECTRICAL CODES.
To avoid electrical shock, this
appliance MUST be adequately
grounded in accordance with local
electrical codes or, in the absence of
local codes, with the current edition
of the National Electrical Code
ANSI/NFPA No. 70. In Canada, all
electrical connections are to be made
in accordance with CSA C22.1,
Canadian Electrical Code Part 1 or
local codes.
PATENT NOS.
3521030
4595247
®
PH
IMPROPER INSTALLATION, ALTERATION,
ADJUSTMENT, SERVICE OR MAINTENANCE
COULD RESULT IN SEVERE INJURY, DEATH
OR CAUSE PROPERTY DAMAGE.
Loading...