Alto-Shaam 100-HSL User Manual
100-HSL Series
HOT CARVING SHELVES
DUE TO ONGOING PRODUCT DEVELOPMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.PRINTED IN U. S .A . #02 - 10/06
ITEM NO. _______________________
This heated carving shelf is constructed with 18 gauge non-magnetic stainless steel. Available with one or two
heat lamps, this heated shelf base is controlled by one (1) adjustable thermostat with a range of 1 through 10,
and includes one (1) ON/OFF switch, and one (1) indicator light. The adjustable 250 watt infrared heat lamps
are controlled by one (1) ON/OFF switch. The exterior has a recessed surface to catch drippings. It is available
with or without a smoke Plexiglas sneeze guard and is furnished with one (1) set of 1" (25mm) legs and one (1)
cutting board.
■■ MODEL 100-HSL/BCS-2: Carving shelf with two lamps
■■ MODEL 100-HSL/BCS-2S: Carving shelf with two lamps and smoke Plexiglass sneeze guard
■■ MODEL 100-HSL/TM: Carving shelf with one lamp
■■ MODEL 100-HSL/TMS: Carving shelf with one lamp and smoke Plexiglass sneeze guard
ADDITIONAL FEATURES & OPTIONS
●
Carving Holders
● Carving Shelf Platforms
● Cutting Boards
●
HALO HEAT . . . a controlled, uniform heat source
radiating heat directly from the carving shelf
surface.
●
Shelf surface controlled by an adjustable thermostat
and ON/OFF switch.
●
Single or double, adjustable lamp assembly provides
additional heat to the product surface.
●
Proper and safe serving temperatures maintained
without additional cooking.
●
Shelf surface is recessed to catch drippings.
●
Sanitary cutting board with gravy lane completely
removable. NSF and USDA listed.
●
Designed to fit on top of a HALO HEAT Cooking and
Holding Oven or Holding Cabinet or suitable for
placement on any surface.
●
Flexible design and usage choice:
— Available with or without sneeze guard.
— Small single or large double lamp shelf.
●
Low energy usage.
100-HSL/TMS
100-HSL/BCS-2S
W164 N9221 Water Street • PO Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: 262.251.3800 • 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 • 800.329.8744 U.S .A. ONLY
WEBSITE: www.alto-shaam.com
®
DUE TO ONGOING PRODUCT DEVELOPMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
PRINTED IN U. S .A .
DIMENSIONS: H x W x D
TM SERIES • EXTERIOR WITH LEGS:
39" x 18-5/16" x 25-1/8"
(990mm x 465mm x 638mm)
BC SERIES • EXTERIOR WITH LEGS:
39" x 28-1/8" x 30-1/8"
(990mm x 714mm x 765mm)
PRODUCT\PAN CAPACITY
TM SERIES: 40 lbs (18 kg) MAX.
(SMALL STEAMSHIP ROUND)
BC
SERIES: 70 lbs (31.7 kg) MAX.
(
LARGE STEAMSHIP ROUND)
ATTENTION
Warranty does not apply if the shelf is flooded
or immersed in water.
INSTALLATION REQUIREMENTS
Carving shelf must be installed level, and must not
be installed in any area where it may be affected by
steam, grease, dripping water, high temperatures,
or any other severely adverse conditions.
WEIGHT
100-HSL/TM 100-HSL/BCS-2
100-HSL/TMS* 100-HSL/BCS-2S*
NET 25 lb (11 kg) 40 lb (18 kg)
30 lb (14 kg)* 45 lb (20 kg)*
SHIP 40 lb (18 kg) 70 lb (32 kg)
45 lb (20 kg)* 75 lb (34 kg)*
CARTON 26" X 22" X 15" 32" X 30" X 20"
DIMENSIONS: (660mm x 559mm x 381mm) (813mm x 762mm x 508 mm)
OPTIONS & ACCESSORIES
Carving Holders
■■ Prime Rib HL-2635
■■ Steamship Round 4459
Cutting Board
■■ 18" x 12" x 1/2" (457mm x 305mm x 13mm) BA-2358
■■ 18" x 24" x 1/2" (457mm x 610mm x 13mm) BA-2054
Carving Shelf Platform
■■ TM SERIES on 500-S holding cabinet 16222
■■ TM SERIES on 500-TH-II or /III cook/hold oven 16222
■■ BC SERIES on 750-S holding cabinet 16237
■■ BC SERIES on 750-TH-II or /III cook/hold oven 16237
ELECTRICAL
VOLTAGE PHASE CYCLE/HZ AMPS kW CORD & PLUG INCLUDED
TM SERIES 125 1 50/60 6.0 .75
BC
SERIES 125 1 50/60 8.0 1.0
TM
SERIES 230 1 50/60 3.4 .75
BC
SERIES 230 1 50/60 4.5 1.0
#02- 10/06
23-7/8"
100-HSL Series
HOT CARVING SHELVES
(H x W x D)
NEMA 5-15P
15A 125V PLUG
CEE 7/7
220-233V PLUG
W164 N9221 Water Street • PO Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: 262.251.3800 • 800.558.8744 U .S.A./CANADA FAX: 262.251.7067 • 800.329.8744 U.S.A. ONLY
WEBSITE: www.alto-shaam.com
®
(606mm)
18-5/16"
(465mm)
3" (76mm)
24-1/4" (616mm)
maximum
38" (965mm)
1-1/4" (32mm)
FOR CONTROLS
1" (25mm)
FOR LEGS
100-HSL/TM
100-HSL/TMS
28-1/8" (714mm)
1"
(25mm)
28-7/8" (733mm)
1-1/4" (32mm)
FOR CONTROLS
26-1/8"
(664mm)
1" (25mm)
FOR LEGS
1"
(25mm)
3" (76mm)
24-1/4" (616mm)
100-HSL/BCS-2
100-HSL/BCS-2S
maximum
38" (965mm)
Loading...