Page 1
ALP-XP850
XPEDITION 850
USER MANUAL
Introduction
Thank you for purchasing our ALP-XP850 Xpedition. We are condent that the Altec Lansing family of products will make your life
easier by using the latest technological advancements in sound reproduction and will raise the bar for pro audio products.
Support
At Altec Lansing, our highest priority is making your experience
unforgettable. Need help with setting up, troubleshooting, or looking
for some tips? We’re here for you, Monday through Friday 9AM to
5PM EST.
1-888-703-2307
alteclansing.com
Page 2
2
ALP-XP850 XPEDITION 850
Page 3
ALP-XP850 XPEDITION 850
3
Index
What’s Included
Warning
Power On
Lighting
Lighting Modes and Color Control
Bluetooth Pairing
Bluetooth Linking
AUX Input
Beast Mode
Recharge Your Speaker
Check Battery Status
Charging External Devices
Weather Resistance (IP67 Rating)
Deep Cup Holders
Integrated Bottle Opener
Big, Deep Pocket for All Accesories
Control the Speaker with a New App
Warranty and Repair
Limited Warranty
Return/Repair
What’s Included
Please ensure that you nd these accessories included with your ALP-XP850 Xpedition speaker:
1 ALP-XP850 Xpedition Speaker
1 Power Adaptor with cord
1 DC Power Adapter
3
4
8
8
8
9
9
10
10
10
10
11
11
12
12
12
12
12
13
13
Page 4
4
ALP-XP850 XPEDITION 850
Page 5
ALP-XP850 XPEDITION 850 5
To reduce the risk of electrical shock, do not open the unit. There are no user replaceable parts
inside. Please refer servicing to a qualified Altec Lansing service technician. Do not attempt to
return this equipment to your dealer.
Do not open the device or attempt to disassemble the internal parts or modify them in any way.
The device contains no user- serviceable parts. If it should appear to be malfunctioning,
discontinue use immediately and have it inspected by qualified Altec Lansing service personnel.
Replacement Parts: When replacement parts are required, be sure the service technician has
used replacement parts specified by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire, electrical shock, or other hazards.
Responsible Party Name:
Innovative Concepts & Designs
Company address:
107 Trumbull St-F8 2nd Floor
Elizabeth, NJ, 07206 USA
FCC ID: 2AE6GALP-XP850
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. The operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant
to Part 15 of the FCC Rules. These equipment generates uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause interference to radio or television reception, which can be determined by turning the equipment o and
then on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to a dierent outlet so that the equipment and receiver are on dierent branch circuits.
• Consult the dealer or an experienced radio/TV technician for help.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Page 6
8
ALP-XP850 XPEDITION 850
Power On
• Turn the Volume knob to 0.
· Apague completamente el volumen.
• Press the POWER button. As soon as
it’s on, you’ll hear “Welcome to Altec
Lansing”.
· Enciende el boton “POWER”. Cuando esté
encendido oirás “Welcome to Altec Lansing”.
• Be sure to charge the battery fully before
rst use.
· Asegúrese de cargar la batería completamente
antes de usar la bocina por primera vez.
Lighting
The Xpedition has lights built into the
front of the speaker.
La Bocina tiene luces delanteras.
• Press the "Light" button to switch
between the 5 built-in light modes.
· Presione el botón “Light” para elegir uno
de los 5 modos de iluminación.
• To change the color of the current
light mode, press and hold the
Volume knob for 2 seconds.
· Para cambiar el color del modo
de luz actual, mantenga pulsado el
boton “Volume” durante 2 segundos.
• Turning the knob will change the color of
the lights. There are 12 color combinations
including random. You will automatically
exit color change mode by not using any
control for 2 seconds.
· Girar el boton “Volume” cambiará el color
de las luces. Hay 12 combinaciones de colores
incluyendo al azar. Saldrá automáticamente del
modo de cambio de color al no utilizar ningún
control durante 2 segundos.
• To turn the strobes ON or OFF, press the
Strobe button.
· Para encender o apagar los ashes, presione el
botón “Strobe”.
• If you are sensitive to ashing
lights, please be sure to turn the
strobes OFF when using the speaker.
· Si es sensible a las luces intermitentes,
asegúrese de apagar las luces
estroboscópicas cuando use la bocina.
Lights
Strobe
Lighting Modes and Color Control
The Xpedition has multi-color lighting built
into the front of the unit. There are 3 main light
areas-speakers, rings and the strobes. Pressing the
"Ligths" button directly above the Volume knob
cycles through the 5 dierent lighting modes:
• Mode 1: Speakers and rings are always a
dierent color. Lights randomly change color
combinations unless user selects a specic
combination (then lights remain on user selected
combination). Strobes ash at 170 BPM.
• Mode 2: Strobe ashes at 170 BPM. Speakers
and rings are always dierent colors. Lights
change color to the beat of the music. If user
selects a combination, lights stay that color and
ash to the music.
• Mode 3: Strobe ashes at 170 BPM. Lights pulse
to the beat of the music, with speaker and ring lit
the same color. User can change light color.
• Mode 4: Speakers and rings are always the
same color. Lights randomly change color
combinations unless user selects a specic color
(then lights remain on user selected color).
Strobes ash at 170 BPM.
Lighting Color Chart
1
12
11
10
9
8
1. Red 7. Lime
2. Lavendar 8. Sky Blue
3. Royal Blue 9. Yellow
4. White 10. Purple
5. Green 11. Turquoise
6. Light Blue 12. Random
• Mode 5: All lights o.
2
3
4
5
7
6
Page 7
ALP-XP850 XPEDITION 850 9
Bluetooth Pairing
This allows you to pair a portable device
to the Xpedition to play your favorite
streaming music.
Esto le permite emparejar un dispositivo portátil
a la bocina para reproducir su música favorita.
• Press the Bluetooth button for 2 seconds.
Button will start blinking blue.
· Presiona el boton “Bluetooth” en la Bocina. El
boton encenderá una luz azul parpanderante.
• If your phone is NFC compatible, press
the Bluetooth button and tap your phone
against the NFC logo on the Xpedition
to pair (NFC must be turned on in your
portable device settings).
· Si su teléfono es compatible con NFC, toque su
teléfono contra el logotipo de NFC en la bocina
para emparejar (NFC debe estar activado en la
conguración del dispositivo portátil).
Note: The N-Mark is a trademark or
registered trademark of NFC Forum, Inc.
in the United States and in other countries.
• To pair with Bluetooth, open Bluetooth
settings on your mobile device and look
in the device list for “Altec Xpedition”.
Select it and complete the pairing process.
· Para sincronizar “Bluetooth”, abra la
conguración “Bluetooth” de su dispositivo
móvil y busque en la lista de dispositivos “Altec
Xpedition”. Seleccione y complete el proceso de
emparejamiento.
BLUETOOTH
DEVICES
Altec XPEDITION
• Once pairing is complete, the Bluetooth
button will light solid blue, and you will be
able to enjoy streaming music from your
mobile device. Pressing and holding the BT
OFF ON
button for 4 seconds will drop the current
connection.
· Cuando se haya completado el apareamiento, el
boton “Bluetooth” encenderá una luz azul, ahora
estara listo para reproducir musica.
Al presionar y mantener presionado el botón BT
durante 4 segundos, se desconectará la conexión
actual.
Bluetooth Linking
The Xpedition has the ability to link
wirelessly with another Xpedition to
create a stereo pair.
La bocina “Xpedition” tiene la capacidad de
conectarse a otra bocina “Xpedition”.
• Select which of the speakers you want to
control the music. On that speaker, press
the "Link" button. The button will blink to
tell you it’s in search mode.
· Presione el botón “Link” en la bocina de que
quieras que sea la fuente. El botón parpadeará
para indicarle que está en modo de búsqueda.
Link
• Now press the "Link" button on the other
Xpedition speaker.
· Ahora presione el botón “Link” en la otra
bocina “Xpedition”.
Link
• When the 2 speakers have paired, the
Link button will light solid. Any music
sent to the “master” speaker will play on
both speakers.
· Cuando las dos bocinas estén emparejados,
el botón “Link” se encenderá de forma sólida.
Cualquier música enviada al bocina fuente se
reproducirá en ambos bocinas.
Note: Many environmental factors can
affect the range of Bluetooth devices.
To achieve the best performance possible,
place your product in the middle of the
room and make sure it’s not blocked by
walls, furniture, or other obstructions.
Page 8
ALP-XP850 XPEDITION 850
10
AUX Input
Recharge Your Speaker
• The AUX input on the Xpedition allows
you to connect a wired external source.
· La entrada AUX en la bocina le permite
conectar una fuente externa con cable.
USB OUT AUX IN DC IN 15V 5A
5V/2A
• When a device is connected to the AUX
IN jack, you will not be able to hear the
Bluetooth source.
· Cuando un dispositivo esté conectado a la toma
AUX IN, no podrá escuchar la fuente Bluetooth.
Note: The AUX IN is located behind the
waterproof cover on the back of the
Xpedition.
El AUX IN se encuentra detrás de la cubierta
impermeable en la parte posterior de la bocina.
Beast Mode
• Pressing the "Beast" button will increase
low frequency response and give your
music deeper bass.
· Al presionar el botón “Beast”, aumentará la
respuesta de las bajas frecuencias y le dará a su
música graves más profundos.
BEAST
On DC Power:
• The Xpedition is capable of operating
and charging from a DC power source, like
your car’s battery.
· La bocina es capaz de operar y cargar desde
una fuente de alimentación de DC, como la
batería de su automóvil.
• The power supply should provide 15VDC
@ up to 5 A (maximum).
· La fuente de alimentación debe proporcionar
15VDC @ hasta 5A (máximo).
Check Battery Status
• You can check the
internal battery charging
level on the Xpedition by
pressing the Volume knob
for less than 1 second.
· Puede comprobar el nivel de carga interna
de la batería de la bocina presionando el boton
”Volume” durante menos de 1 segundo.
• The LED ring around the Volume knob
will light, indicating the amount of charge
left in the unit (each of the 12 segments
represents approximately 8.3%)
· El anillo LED alrededor del boton “Volume”
se encenderá, indicando la cantidad de carga
restante en la Bocina (cada uno de los 12
segmentos representa aproximadamente 8,3%).
Battery level 66.63%
Page 9
ALP-XP850 XPEDITION 850
11
Charging External Devices
The Xpedition can charge your phone or
other portable device.
La Bocina puede cargar otro dispositivo portátil.
• Using an approved USB charging cable for
your device, connect to the USB type A port
on the back of the Xpedition. Connect the
smaller end to your portable device.
· Con el cable de carga USB correcto para su
dispositivo, conéctelo al puerto USB tipo A en la
parte posterior de la Bocina. Conecte el extremo
más pequeño a su dispositivo portátil.
• Once connected, you should see the
charging indicator activate on your
portable device.
· Una vez conectado, debe ver que el indicador
de carga de su dispositivo portátil indica que está
recibiendo una carga.
Note: Charging and power ports are
located behind the waterproof cover on the
back of the Xpedition.
Los puertos de carga y de alimentación se
encuentran detrás de la cubierta impermeable en
la parte posterior de la bocina.
Weather Resistance (IP67 Rating)
The Altec Lansing Xpedition is IP67 rated,
meaning it is dust resistant and capable of
being submerged for up to 30 minutes at a
depth of 1 meter. However, that doesn’t mean
your new speaker is indestructible. Other
factors – like the corrosiveness of the liquid
due to it containing salt or chlorine – can aect
the overall integrity of the enclosure. If your
Xpedition is exposed to any substance other
than clean water, it’s a good idea to clean the
unit with a clean, soft cloth. Give the unit time
to dry completely before connecting it back to
mains power.
La bocina tiene una clasicación IP67, lo que
signica que es resistente al polvo y puede sumergirse
durante 30 minutos a una profundidad de 1
metro. Sin embargo, eso no signica que su nueva
bocina sea indestructible. Otros factores, como la
corrosividad del líquido debido a que contienen sal
o cloro, pueden afectar la integridad general del
recinto. Si su Xpedition está expuesta a cualquier
sustancia que no sea agua limpia, es una buena idea
limpiar la unidad con un paño limpio y suave. Dele
tiempo a la unidad para que se seque completamente
antes de volver a conectarla a la red eléctrica.
Note: The unit is only protected when the
rear plastic port cover is properly in place, if
not, the unit is not sealed from damage and
care should be taken to protect it from any
exposure to liquids or dust.
La bocina solo está protegida cuando la tapa
del puerto de plástico trasero está colocada
correctamente, de lo contrario, la unidad no está
sellada contra daños y se debe tener cuidado de
protegerla de cualquier exposición a líquidos o polvo.
Page 10
12
ALP-XP850 XPEDITION 850
Warranty and Repair:
All Altec Lansing products are designed and manufactured to the highest standards in the industry. With
proper care and maintenance, your product will provide years of reliable service.
Limited Warranty
A. Altec Lansing guarantees its products to be free from defects in materials and workmanship for one
(1) year from the original purchase date.
B. This limited warranty does not cover damage or failure caused by abuse, misuse, abnormal use,
faulty installation, improper maintenance or any repairs other than those provided by Altec Lansing.
C. There are no obligations of liability on the part of Altec Lansing for consequential damages arising
out of or in connection with the use or performance of the product or other indirect damages with
respect to loss of property, revenues, of prot, or costs of removal, installation, or reinstallation. All
implied warranties for Altec Lansing, including implied warranties for tness, are limited in duration to
one (1) year from the original date of purchase, unless otherwise mandated by local statutes.
Return/Repair
A. In the U.S.A., please call our helpful Customer Service Representatives at (888) 703-2307, and they
will be happy to give you a Return Authorization Number (RA#) and the address of an authorized
service center closest to you.
B. After receiving an RA#, include a copy of the original sales receipt, with defective product and a
description of the defect. Send by insured freight to: Altec Lansing and use the address provided by your
customer service representative. Your RA# must be written on the outside of the package, or processing
will be delayed indenitely!
C. Service covered under warranty will be paid for by Altec Lansing and returned to you. For non-warrantied products, Altec Lansing will repair your unit after payment is received. Repair charges do not
include return freight. Freight charges will be added to the repair charges.
D. On warranty service, you pay for shipping to Altec Lansing, we pay for return shipping within the
continental United States. Alaska, Hawaii, Puerto Rico, Canada, Bahamas, and the Virgin Islands will
be charged for freight.
E. Please allow 2-3 weeks for return of your product. Under normal circumstances your
product will spend no more than 10 working days at Altec Lansing. We are not responsible for
shipping times.
Parts of the design of this product may be protected by worldwide patents. Information in this manual
is subject to change without notice and does not represent a commitment on the part of the vendor.
Altec Lansing shall not be liable for any loss or damage whatsoever arising from the use of information
or any error contained in this manual. No part of this manual may be reproduced, stored in a retrieval
system or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, chemical,
including photocopying and recording, for any purpose without the express written permission of Altec
Lansing. It is recommended that all maintenance and service on this product is performed by Altec
Lansing or its authorized agents. Altec Lansing will not accept liability for loss or damage caused by
maintenance or repair performed by unauthorized personnel.
© 2019 AL Innity, LLC. All rights reserved. ALTEC LANSING; HORN Design and related logos are registered trademarks of AL Innity and used under license; Bluetooth logo is a registered trademark of Bluetooth SIG;The N-Mark is a trademark or registered trademark
of NFC Forum, Inc. in the United States and in other countries; The Bluetooth range is aected by walls, obstructions, and movement. For
optimal performance, place the product in the center of the room so it is unobstructed by walls, furniture, etc;
Battery life may vary.
This device complies with Part 15 of the FCC rules. An operation is subject to the following two conditions:
(1) this device may not cause harmful interference. and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Loading...