Alpine KTC-211PW, KTC-211SH User Manual

KKTTTT

KK

KKTTTT

KK

CCCC----222211111111PPPPWW

CCCC----222211111111SSSSHH

WW 55550000----0000333388885555

HH 55550000----0000333388885555

2000 SUBURBAN / YUKON XL

Overhead Console for use with Mobile Overhead Monitor

AAAA----0000111188

AAAA----0000222266

INSTALLATION MANUAL

88

66

These instructions are intended for use only by experienced professionals in the automotive
customizing business. Special tools and equipment, as well as specialized handling and care of
product during installation, may be required. Before beginning this installation, carefully read through
the following instructions. Use extreme care when cutting headliner material. Check for wiring
or other componentry above headliner material. Cut only where indicated.

Materials / Tools required for this installation:

1. Phillips screwdriver 2. Powered screwdriver or drill with adapter

3. Awl or scribe point tool or similar 4. Razor knife or similar tool

5. 18 GA wire 4' 6. Rubbing alcohol

7. ALPINE TMX-R680A Mobile Overhead Monitor

Jan. 1,2001

INSTALLATION INSTRUCTION # 44-0085A

Printed in the U.S.A.

MATERIALS PROVIDED FOR
INSTALLATION:

ITEM Description QTY 1

1
2
3
4
5
6
7
8
9

10

SCREW, # 6 x 3/8" PPH
SCREW, #10 X 1/2" HWH
SCREW, 8-32 X 1 1/2" PPH
VELCRO TAPE, 1" X 6"
TEMPLATE
FRONT MOUNTING BRACKET
REAR MOUNTING BRACKET
A/C CONTROL MOUNTING BRACKET
CONSOLE
SWITCH, SPDT

2
4
4 2
1
1
1 3
1
1
1
1

INSTALLATION INSTRUCTION # 44-0085A

Jan. 1, 2001
Printed in the U.S.A.

2

PHOTO 1

I. REMOVAL OF O.E.M.

EQUIPMENT .

1. Release front mounting clips of O.E. dome light by
gently prying downward on front edge of housing.
See Photo 1.

2. Gently lower the front of housing enough to reach inside
and push the A/C control head out of the housing.
Disconnect wiring and lay control head in a safe place.

3. Remove and discard (2) two screws which secure
housing. Disconnect wiring and discard light assembly.

See Photo 2.

II. PREPARATION OF VEHICLE INTERIOR .

PHOTO 2

3