Page 1
Alphacool NexXxos ST30 Full Copper
Details:
Size:Wx HxD
278x124x 30mm
Connecting Fitting:
2x G 1/4“ DIN 228-1
Screw Holes:
16x M3x0,5 - max. 5mm deepness
Weight:
0,731 kg
Max Pressure:
1,5 bar
Volume:
180ml
Rth Results:
0,0137
Full Copper Radiator
Alphacool has been the company to
introduce new developments and
improvements in the radiator and
water cooling sector generally many
times over the last years.
Following this tradition, the new
NexXxos radiators are the first to truly
deserve the “Full copper” attribute. All
main parts, not only the fins and
channels, but the chambers are also
made from copper. This brings an
improvement in performance where
other radiators are left without a
chance. The material already gives an
advantage over the competition and
the inner structure is up to par with
the competition. Separated chambers
give the coolant a clear direction,
allowing high flow rates, which
improve the performance of the whole
cooling loop.
Flat chambers on the heat exchanger
increase mounting flexibility thanks to
the reduced overall length.
Versatile and Easy
Mounting
Versatile and easy mounting is one of
the main points, on which the
research and development
department at Alphacool focused. The
chamber offers three possibilities for
fitting installation on both inlet and
outlet (not on the NexXos ST30). Less
angled fittings are needed, improving
flow rates and offering more mounting
possibilities. Hence the radiator can
even be installed in tight enclosures,
where otherwise the internal
installation is not a possibility. A 1/4"
screw plug allows easy de-aeration of
the radiator (on all UT60 and
NexXxos Monsta) and hassle-free
vertical installation of the heat
exchanger. The threaded opening can
even be used for filling, e.g. in
combination with a Fillport.
RTH Result
The Rth value is calculated from the air temperature, water temperature and performance.
In this test, we assumed that the two fans has each a flow rate of 750m ³ / h × 10
The pump has a flow rate of 1500 l / h.
.
The Technical Drawing:
Loading...